羽毛球撿球車三維結構設計

1.1萬字 42頁 原創作品，已通過查重系統


畢業設計說明書中文摘要
通過查閱國內外文獻確定了整體設計思路。通過查找機械設計手冊等專業工具書，選定了各部分的標準件。使用Pro/Engineer Wildfire5.0軟件繪制了零件的三維圖與總體的三維裝配圖并生成了部分零件與裝配體的二維工程圖。使用Auto CAD軟件對生成的二維工程圖進行了符合國家標準的修改。通過由發動機驅動的皮帶輪連接的抬升板實現了撿起羽毛球的功能。通過有落差的漏斗裝置實現了調整羽毛球使其頭朝下掉落進儲球筒的功能。通過傳感器與儲球筒轉盤實現了儲球筒儲球滿后自動切換到另一儲球筒的功能。

關鍵詞 羽毛球撿球 結構設計 三維設計 計算機輔助設計



畢業設計說明書外文摘要

title 3D Constructional Design of the Badminton Picking-up Cart

Abstract
National and foreign documents are studied to establish the concept of this design. Professional reference books such as Machinery Handbook are referred to choose the standard components for the badminton picking-up cart. The software Pro/Engineer Wildfire 5.0 is used to design the 3D models and the 2D engineering drawings of the components and the assemblies of the machine. The software Auto CAD 2005 is used to modify the 2D drawings so they could reach the National Standard of China. The function of badminton picking-up is achieved by the boards connected by the belt energized by the engine. The function of adjusting the falling position of the badminton into the storage barrel is achieved by the altitude difference between the funnel and the top board. The function of the switching of the storage funnels is achieved by a couple of sensors and the dial energized by another engine.


Keywords badminton picking-up 3D design CAD
constructional design machinery




目 次
1 引言 1
1.1 羽毛球的外形參數 1
1.2 羽毛球撿球設備的研究現狀與優缺點分析 2
1.3 羽毛球發球機的概況 3
1.4 羽毛球發球機的工作原理 4
1.5 本課題的設計目的和主要內容 6
2 羽毛球撿球車的總體設計 7
2.1 推車底座部分的設計 7
2.2 撿球抬升板部分的結構設計 9
2.3 理球漏斗部分的結構設計 16
2.4 轉盤儲球筒部分的結構設計 18
3 軸承的選取 23
3.1 深溝球軸承相關計算 24
4 鍵強度的校核 27
5 電動機的選取 28
6 羽毛球撿球車的三維仿真 32
結 束 語 34
致 謝 35
參 考 文 獻 36