摘 要

紅外測溫儀診斷技術對電氣設備的早期故障缺陷及絕緣性能做出可靠的預測，使傳統電氣設備的預防性試驗維修(預防試驗是50年代引進前蘇聯的標準)提高到預知狀態檢修，這也是現代電力企業發展的方向。特別是現在大機組、超高電壓的發展，對電力系統的可靠運行，關系到電網的穩定，提出了越來越高的要求。隨著現代科學技術不斷發展成熟與日益完善，利用紅外狀態監測和診斷技術具有遠距離、不接觸、不取樣、不解體，又具有準確、快速、直觀等特點，實時地在線監測和診斷電氣設備大多數故障(幾乎可以覆蓋所有電氣設備各種故障的檢測)。它備受國內外電力行業的重視(國外70年代后期普遍應用的一種先進狀態檢修體制)，并得到快速發展。紅外檢測技術的應用，對提高電氣設備的可靠性與有效性，提高運行經濟效益，降低維修成本都有很重要的意義。是目前在預知檢修領域中普遍推廣的一種很好手段，又能使維修水平和設備的健康水平上一個臺階。
采用紅外成像檢測技術可以對正在運行的設備進行非接觸檢測，拍攝其溫度場的分布、測量任何部位的溫度值，據此對各種外部及內部故障進行診斷，具有實時、遙測、直觀和定量測溫等優點，用來檢測發電廠、變電所和輸電線路的運轉設備和帶電設備非常方便、有效

關鍵詞：紅外測溫  SPCE061A  語音播報

 Abstract

Infrared measured the warm meter diagnosis technology makes there liable forecast to the electrical equipment early breakdown flaw and the insulating ability, causes the tradition electrical equipment the preventive test service (prevention experiment is the 50's introduces former Soviet Union the standard) to enhance to knew in advance the condition overhaul, Unceasingly develops along with the modern science and technology maturely with day by day consummates, each kind of breakdown examination). It prepares the domestic and foreign electric powers profession value (overseas in the late 70's universal application one kind of advanced condition overhaul system), and obtains the fast development. The infrared detection technology application, to enhances the electrical equipment the reliability and the validity, enhances the movement economic efficiency, reduces the service cost all to have the very vital significance. Is at present in knows in advance in the overhaul domain the universal promoted one very good method, also can cause the  service level and in the equipment health standard a stair.
Uses the infrared imagery examination technology to be allowed to the equipment which moves to carry on the non- contact examination，photographs its temperature field the distribution, surveys any spot the temperature value, according to the above carries on the diagnosis to each kind outside and internal breakdown, has real-time, the telemetering, direct-viewing and decides and so on the merit warm, uses for to examine the power plant, the transformer substation and the transmission line revolution equipment and the charged equipment extremely convenient, is effective

Key  words: Infrared measure    SPCE061A   The pronunciation broadcasts the newspaper

目　錄

摘要…………………………………………………………………………………Ⅰ  
Abstract……………………………………………………………………………Ⅱ
緒論…………………………………………………………………………………1
1總體方案的設計……………………………………………………………………2
1.1設計及性能指標………………………………………………………………2
1.2方案的選擇………………………………………………………………………2
1.3 課題的內容及任務……………………………………………………………  3
1.4 課題中單片機的發展……………………………………………………………4
1.5 課題的意義………………………………………………………………………5
1.6 本章小結          …………………………………………………………5
2系統硬件的設計…………………………………………………………………6
2.1系統電路結構圖………………………………………………………………6
2.2 系統硬件電路簡介………………………………………………………………6
2.2.1 SPCE061A簡介……………………………………………………………7
2.2.2并行I/O端口模塊……………………………………………………………8
2.2.3電源輸入模塊…………   ………………………                     9
2.2.4音頻輸出模塊………………………………………………    …………10
2.2.5 實時時鐘……………………………………………………………………10
2.2.6 看門狗電路…………………………………………………………………11
2.3紅外測溫儀的選擇及技術參數……………………………………………12
2.3.1紅外測溫模塊時序介紹……………………………………………………12
2.3.2紅外測溫模塊溫度值的計算………………………………………………13
2.3.3紅外測溫的工作原理………………………………………………13
2.4硬件電路連接及其接口說明…………………………………… ……………14
2.4.1硬件結構連接圖及接口說明………………………………………………14
2.4.2 LED硬件接線圖………………………………………                  14
2.4.3鍵盤結構圖……                             ………………………15
2.4.4 LED顯示模塊………………………………………………              16
2.4.5 ULN2003結構圖……………          ……………………………………17
2.5本章小結…………………………………   …………………………………17     
3軟件編程             ………………………………………………………18
3.1 系統主程序框框圖及其說明………………………………………………18
3.2 各個程序模塊的說明………      …………………………………………19
3.2.1 讀取數據模塊…………………     ………………………………………19
3.2.2 播放顯示程序………………… ……………………………………………20
3.3本章小結………………      ………………………………………………21
結論…………………………………………………………………………………22
致謝…………………………………………………………………………………23
參考文獻……………………………………………………………………………24
附錄 系統程序…………………………………………………………………… 25