基于ptotues keil(I2C)串行通信系統仿真

目 錄

1. 引言  1
2. I2C總線原理  1
2.1 數據位的傳送  2
2.2 啟始和停止?fàn)顟B(tài)  3
2.3 傳輸數據  3
2.4 應答  3
2.5 數據傳輸格式  4
2.6 I2C總線的尋址  5
2.7單片機主從系統I2C總線模擬程序  6
3 I2C總線應用  6
3.1 I2C總線擴展E2PROM  6
3.2 I2C總線擴展I/O口  8
3.3 I2C總線A/D及D/A轉換  9
3.3.1 PCF8591芯片介紹  9
3.3.2器件總地址  9
3.3.3  D/A轉換與A/D轉換  10
程序附錄  14
參考文獻  23
致謝  24
 
摘  要：本文主要是基于I2C技術，應用protues keil軟件，設計虛擬I2C總線串行通信外圍擴展。介紹了I2C串行通信的基本原理，虛擬I2C總線技術，I2C總線和E2PROM，ADC/DAC，I/O口等外圍器件接線方法，時序，及其尋址方法。
     
關鍵詞： I2C總線技術；串行通信；I2C總線虛擬技術；串行外圍擴展

Serial (I2C) communication system simulation Based ptotues keil

 
Abstract:  This article is based on I2C technology, application protues keil software, designing virtual I2C bus serial communications peripherals expansion. It has Introduced the basic principles of I2C serial communication, virtual I2C bus, I2C bus and E2PROM, ADC / DAC, I / O ports and other peripheral device connection method, timing, and addressing methods.

Key Words: I2C bus technology; serial communication; I2C bus virtual technology; serial peripheral expansion