YS32G-630C液壓機電氣改造改造

包括開題報告、畢業論文、英文翻譯、中期報告等和6張CAD圖紙：液壓原理圖、梯形圖、主電路圖、接線圖、控制電路圖、流程圖


摘  要
 本論文介紹了PLC的特點及發展趨勢，闡述了液壓機在國內外發展的狀況和預測。并詳述了YS32G-630C液壓機的工作原理及其特點，對該液壓機的主電路圖、控制電路圖以及液壓系統工作原理進行了詳細的分析。本文提出了傳統液壓機的繼電器—接觸器電氣控制系統存在的一些問題，并提出了較好的改造方案。通過運用可編程控制器（PLC）來代替?zhèn)鹘y(tǒng)的繼電器—接觸器控制方式，使系統控制更加簡單易懂，操作更加靈活方便。文中從硬件設計和軟件設計兩個方面論述了系統的改造方案。在硬件線路設計方面，闡述了系統改造的思路和改造的內容，并對PLC的選擇和PLC控制系統的接線設計做了詳細的說明。在軟件線路設計方面，根據液壓機的工作流程圖和控制電路圖，論述了程序設計的思路及其設計方案，并繪制了程序的梯形圖。在論文最后對PLC控制系統設計中的干擾問題進行了簡單的論述。在現代企業中，可編程控制器以其功能強大、通用見效快、環境適應性好、編程簡單等一系列優點在各種機床中已經得到了廣泛的應用。

關鍵詞：液壓機  電氣控制系統  PLC  改造
 
Abstract
This paper introduced the characteristics and the development trend of the PLC and expounded the development of the hydraulic press at home and abroad. The paper also detailed the principle and the characteristics of the YS32G-630C hydraulic press and analyzed the main circuit, the steering circuit and the principle of the hydraulic system in detail. This paper raised a number of issues of the traditional hydraulic machine's electrical control system with relay - contactor and made a better technical upgrading proposal. Through the use of programmable logic controller (PLC) to replace the traditional control system with relay - contactor, making the control system more easy to understand and the operation more flexible. This paper discoursed the upgrading proposal on two aspects. They are the design of hardware and software. On the hardware design, described the ideas and the transformation contents of the system and detailed the choice of PLC and the wiring design of the PLC control system. On the software design, according to the flow chart of hydraulic machine and the control circuit, discussed the idea of the design process and its technical proposal and drawn the ladder diagram of the program. In the final of the paper, under drawn the interference problem of the PLC control system. In modern enterprises, the PLC has been widely used with its powerful, universal quick, environmental adaptation, and simple programming and so on in a variety of machine tools.
Keywords：Hydraulic Press  The electricity control system  PLC  Transformation
 
目   錄
摘  要 I
Abstract II
目   錄 III
第一章 緒 論 1
1.1 課題來源、目的、意義 1
1.2 國內外概況與預測 2
1.3 文獻綜述 5
1.4 課題的提出及任務 6
第二章 液壓機系統的分析 7
2.1  液壓機的工作原理 7
2.2  YS32G-630C液壓機的技術參數 8
2.3  YS32G-630C液壓機的主電路分析 9
2.4  YS32G-630C液壓機的控制電路分析 10
2.5  YS32G-630C液壓機液壓系統的分析 13
2.6  小結 13
第三章 硬件線路設計 14
3.1 系統的改造方案 14
3.2  I/O端口的統計與分配 14
3.3 可編程控制器的選擇 15
3.4 地址的分配 16
3.5 地址接口的說明 18
第四章 軟件線路設計 20
4.1 程序設計思路 20
4.2 程序的設計方案 21
4.3 梯形圖的繪制 21
4.4  PLC的干擾問題 21
第五章 結 論 24
致 謝 25
參考文獻 26
附錄 27