摘 要


隨著全球經濟一體化發展趨勢，特別是中國加入WTO以后，提高油庫的售油自動化水平成為我國石油行業發展中的一項急迫需要。在這種前提下，開發新的石油控制系統已經成為當務之急。目前，可編程控制器已經在自動售油控制系統中得到了廣泛的運用。本文對以PLC為控制器的自動售油系統的設計原理和系統的整體結構方案進行了詳細的敘述?？删幊踢壿嬁刂破饕云涫褂煤?jiǎn)單方便、抗干擾性能強、故障率低等一系列優點，在控制系統安全、穩定的運行等方面做出了巨大貢獻。整個系統構成擴展性好、可靠性高，具有良好的通用性和工程推廣性。本文第一章首先介紹了國內外自動售油油控制系統的發展情況以及國內現存的主要問題，以及本課題主要研究的內容。第二章主要對三大控制系統進行了對比，很好的展現了PLC+PC組成控制系統的優點，并作出了控制系統的總體設計。第三章是系統硬件設計,作為整個系統的主要部分，詳細闡述了現場設備、PLC、及網絡通信的介紹。第四章主要是針對本控制系統軟件部分的設計。最后還對本系統設計作出了總結。


關鍵詞：油庫；售油控制；安全防爆


 

Abstract


With the globalization of the world economy, especially with the entry to WTO, it is obvious that improving automatic level of oil delivery in the tank farm is urgent in the development of industry of petroleum. On this premise, the development of a new distributed control system for oil has become a top priority. At present, the programmable logic controller has been widely used in Automatic Oil System. This paper describes the design principles and overall structure of the Distributed Control System for Petroleum Based on PLC in detail. PLC makes great contribution to the system based on its easy to use, low failure rate and strong anti-interference. The composition of the whole system is scalability, reliability. This system has a good feature of universal and extended. Chapter 1 introduces the development of the Automatic Oil System as well as major problems existing in our country, and the principal content of this paper. Chapter 2 analyses the three control system, and it demonstrates the advantages of PLC+PC control systems by comparing the three main control system. And make the overall design of the control system. Chapter 3 is system hardware design. It is the most important part of this system.It describes the introduction of field, equipment, PLC and network communication. Chapter 4 is mainly directed against the part of control system software based on PLC. The final is a summary of system design.

 

Keywords:Depot;sale of oil control;safety explosion-proof

目  錄


第1章 緒論 1

1.1 油庫售油系統的發展現狀 1

1.2 課題研究的意義和目的 2

1.3 本論文主要研究的內容 2

第2章 油庫售油系統總體設計 3

2.1 控制系統方案選擇 3

2.1.1 控制系統的幾種主要形式 3

2.1.2 控制系統方案確定 4

2.2 油庫自動售油控制系統總體設計 4

2.2.1 系統設計的原則 5

2.2.2 控制系統的組成 5

2.2.3 系統總體結構圖 5

2.2.4 系統功能的實現 6

2.2.5 系統業務流程 7

第3章 系統硬件設計 9

3.1 流量計量的實現 9

3.1.1 流量計的選擇 9

3.1.2 LL—AL80.1/A5QF—Ⅱ型腰輪流量計原理及性能 12

3.1.3 流量的計量 13

3.2 流量控制的實現 14

3.2.1 售油系統對控制閥的要求 14

3.2.2 控制閥的選擇 14

3.2.3 電磁閥的工作原理 15

3.2.4 電磁閥的選擇 16

3.3 安全售油的實現 16

3.3.1 現場信號處理 17

3.3.2 防靜電溢油設計 19

3.3.3 人對售油過程的監控 20

3.3.4 售油溫度補償?shù)膶?shí)現 21

3.4 控制器PLC的選擇 22

3.4.1 PLC的選型 22

3.4.2 CJ1系列PLC結構 22

3.4.3 CJ1系列PLC 各模塊選擇 23

3.5 PLC與控制PC機通信的實現 30

第4章 系統軟件設計 31

4.1 自動售油控制軟件設計 31

4.1.1 控制系統分析 31

4.1.2 控制軟件編程思路 31

結  論 34

參考文獻 35

附  錄 36

謝  辭 38