摘  要

　　　近年來隨著計算機技術、通信技術和集成電路技術的迅猛發展，射頻識別技術（Radio Frequency Identification，以下簡稱RFID）已經引起人們的關注。RFID系統由閱讀器、控制器和電子標簽三部分組成，電子標簽技術也已經在我們的日常生活中得到廣泛的應用，如學校食堂使用的飯卡，公交車上使用的交通卡，停車收費裝置中的收費卡等。電子標簽技術是一種非接觸式的自動式識別技術，它通過射頻信號自動識別目標對象并獲取數據，與現在廣泛應用的條形碼技術相比，電子標簽除了可以省去人工操作，還具有防水、防磁、耐高溫、使用壽命長、讀取距離遠等優勢。
　　　本文設計的電子車牌是基于RFID開發的一種車輛身份自動識別卡，用它可以與設置在閘口通道的閱讀器設備進行信息交換，以達到目標識別和數據交換的目的。以AT89S52單片機作為核心控制器，選用MFRC500作為閱讀器芯片，電子標簽芯片選用MCRF355, 單片機通過控制MFRC500驅動天線實現對射頻卡的讀寫操作，實現與射頻卡數據的無線傳輸。
　　　本設計采用低功耗器件，待機時間長，運行可靠，可用于電子車牌、物流等行業。

關鍵詞：RFID   電子標簽  單片機
Abstract

　　　In recent years, with the computer technology, communication technology and integrated circuit technology rapid development, Radio Frequency Identification technology has aroused people's concern. The RFID system consists of reader, controller and electronic tag three parts, electronic tag technology has also in our daily life, such as widely used school rice card, bus transportation card, parking charge installations in the ShouFeiKa. Electronic tag technology is a non-contact automatic type identification technology, rf signal through its automatic target recognition and access to data, and is now widely used compared the bar code technology，electronic tag besides can save artificially operation, but also has waterproof, prevent magnetic, high temperature resistant, long service life, read the distance and other advantages.
　　　This design license plate is based on RFID electronic development of a vehicle with automatic identification card, identity can be set on the gate with its reader equipment channel to exchange information of target recognition and data exchange purposes. This design choose AT89S52 SCM as the core controller, choose MFRC500 as the reader chip, electronic tag chip choose MCRF355, MF RC500 driven by controlling microcontroller to antenna realize reading operation for rf card, realize rf card data wireless transmission.
　　　This paper use the Low-Power component, its advantage is long standby time, reliable operation and so on ,and it can be used in license plate, logistics and so on.
　　　
Keywords:  RFID   Electronic tags    microcontroller

目 錄
引  言 1
第一章 緒 論 2
1.1 RFID電子車牌的開發背景 2
1.2 RFID電子車牌的研究現狀 2
第二章  RFID系統及其原理 4
2.1 RFID概述 4
2.2 RFID系統的組成 4
2.3 RFID系統的基本原理 5
第三章  系統的硬件設計 7
3.1 Altium Designer Winter 09介紹 7
3.2 硬件整體設計方案 7
3.3 各模塊的硬件設計 8
3.3.1電源電路的設計 8
3.3.2 單片機接口電路的設計 9
3.3.3 RFID接口電路的設計 11
3.3.4 天線的設計 17
3.3.5 USB接口電路的設計 18
3.3.6 電子標簽的設計 19
第四章  閱讀器系統的軟件設計 21
4.1 51單片機的開發環境 21
4.2 主程序設計的框圖 21
4.3 系統各部分的軟件設計 22
4.3.1 USB驅動設計 22
4.3.2卡程序的設計 23
4.3.3閱讀器系統軟件的設計 24
結  論 26
參考文獻 27
附 錄 一（原理圖） 28
附 錄 二（PCB圖） 34
謝 辭 35