摘 要
隨著我國公路橋梁事業的發展，新建高速公路及橋梁越來越多．同時既有的許多橋梁進入了養護維修階段，有關專家認為橋梁使用25年則進入老化期，據統計，我國橋梁總數的40％已經屬于此范疇，均屬老齡橋梁．而且隨著時間的推移，其數量還還在增長。近20年來，隨著橋梁檢測事業的飛速發展，新結構、新材料、新工藝不斷涌現；同時橋梁結構的使用荷載日益增大，大批既有橋梁進入老齡化期，為了確保橋梁結構的安全運營，對橋梁檢測工作提出了更高的要求，橋梁檢測工作亦有此愈發顯得重要。另一方面，隨著自動化技術的發展以及計算機的普及應用，測試技術、分析手段也取得了長足進展。
為了分析檢測臂的結構性能，用ANSYS 對檢測臂進行了有限元分析，通過分析檢測臂受力及位移變化情況來驗證檢測臂結構安全性。同時對檢測臂進行了模態分析，測出了其固有頻率和結構振型，為檢測車工作時的穩定性要求提供了參考。

關鍵字：橋梁檢測車 ANSYS 有限元分析















Abstract
With the development of highway bridges，more and more highways and bridges have been built recently. At the same time many of the existing bridges have came into the stage of maintaining and repairing. Experts believe that the bridges enter the aging period when they are used for more than 25 years. According to the statistics, aging bridges have accounted for 40% of the total bridges in our country. And over time, their number is also still growing. With the rapid development of the enterprise of the bridge inspection, new structure, new materials, new techniques are emerging constantly in the past 20 years.At the same time,the working load of the bridges is increasing, a large number of existing bridges are entering aging period. In order to ensure the safe operation of the bridges, the requirements of bridge inspection work is more strict. Bridge inspection work is also more and more important. On the other hand, with the development of automation technology and the popularization of computer applications, testing techniques, analytical tools have also made considerable progress.
In order to analyze the structural properties of detection arm, finite element analysis of the detection arm iscarried out by using ANSYS. By analyzing the force and displacement variation of detection arm, its structural securityis verified. Meanwhile, the modal analysis is used to test the detection arm's natural frequency and structural vibration modes, which provides a reference for the stability test of the bridge inspection vehicle.

Key words： bridge Inspection car ANSYS finite element analysis











目 錄
第1章 緒論 1
1.1 研究的目的和意義 1
1.2國內外橋梁檢測的發展歷史和特點 1
1.2.1橋梁檢測的發展歷史 1
1.2.2橋梁檢測車的特點 4
1.2.3 橋梁檢測車的發展 6
1.3 橋梁檢測車臂研究方法 7
1.3.1 國內研究現狀 8
1.3.2 有限元軟件ANSYS工程應用 9
1.3.3 本文主要研究內容 10
第2章 建立橋梁檢測車檢測臂模型 12
2.1 讀圖 12
2.2單元介紹 13
2.2.1 BEAM188單元描述 13
2.2.2 輸入數據 14
2.2.3 BAEM188單元信息 15
2.2.4 BEAM188單元輸出數據 16
2.3 開始建模 18
2.3.1 材料性質 20
2.3.2 施加約束 20
第3章 橋梁檢測車檢測臂的靜力學分析 22
3.1 靜載荷簡述 22
3.2分析加載 23
3.2.1檢測臂的應力分析 23
3.2.2檢測臂的位移分析 28
第4章 橋梁檢測車檢測臂的動力特性分析 34
4.1 動力特性分析目的 34
4.2 分析方法 34
4.2.1 模態分析理論 34
4.2.2 利用ANSYS進行模態分析 35
第5章 結論和展望 39
致謝 40
參考文獻 41
附錄A 英文原文 42

附錄B 英文翻譯 50