汽車空調系統畢業設計

摘要
汽車空調系統是提高汽車舒適度指標的重要部分，控制空調系統工作的空調控制器則是指揮整個空調系統工作的核心。為了提高汽車的舒適度指標，各大汽車廠商尤其是轎車廠商紛紛配置高檔次全自動汽車空調，以提高整車的配置。然而目前高檔全自動空調控制器市場和技術均由國外廠商所壟斷，國內生產企業大部分只能生產低檔電子空調控制器產品或手動控制器產品。無論在市場上和技術上均與國外廠商相差很遠。
本文針對目前國內汽車空調控制器技術落后的情況，提出應用智能控制技術設計具有多傳感器信號輸入的智能型全自動空調控制器。該控制器無論是在功能上、復雜程度上和智能化程度上均遠遠高于現有國產汽車空調控制器產品，技術上趕上國外同類產品。該汽車空調控制器改進了以往汽車空調控制器傳感器少，對車內外環境數據采集不準確、高耗能等缺點，選用高性能微處理器，采集5個傳感器信號，在微處理器內進行分析，并運用神經網絡技術和模糊控制技術設計了一套智能控制器，從而實現對空調系統的總成部分各通風風門、鼓風機以及壓縮機等執行機構的智能控制，使汽車在舒適度、能耗和加速性能等各方面指標較以往均得到大大提高。
本文結合設計要求對空調控制器的軟硬件進行了設計，硬件電路以富士通89F538單片機為核心微處理器，軟件部分采用C程序設計語言，在富士通開發環境下完成。本文還對軟件的測試方法進行了討論，通過軟件測試表明軟件部分完全滿足要求。
本文設計的汽車空調控制器已經通過湖北法雷奧公司的系統測試和奇瑞公司產品部的樣品裝車路試，測試結果表明該空調控制器工作可靠，穩定性高，實現了設計預想要求。

關鍵詞　空調控制器； 智能控制； 微處理器； BP網絡
Abstract
Automobile air-condition system is an important part of the improving of comfort degree, and the air-condition controller is the core of performing of whole air-condition system. To improve the comfort degree of auto, auto manufacturers equip super automatic auto air-condition for their productions one after another. Nowadays, however, foreign manufacturers have monopolized the market and high-level technology, and the national manufacturers have to produce the low-level electronic air-condition controller or manual air-condition controller. Now national products of air-condition controller are far from foreign not only on market but also technology.
Aiming at the situation that the research technique of domestic auto air-condition controller is lower, the thesis put forward to design a completely automatic air-condition controller with the much sensors signal import useing the intelligent control technique. The kind of controller exceed the now available home-made auto air-condition controller produce far away not only in the service capacity but also in the complex degree and intelligentization degree, and catch up with foreign produce in the technique. The auto air-condition controller improve the defect such as little sensors can’t get the exact environment data  and consumes much energy of past produces. Using the high performance microprocessor, collecting five signal of sensor, analyzing them inside the microprocessor and applying the neural network technique and the fuzzy control technique design an intelligent controller, the kind of controller achieves the better control effect to executive body such as ventilations door, blast engine, compressor and so on, and prompt the various index of auto such as energy consumption and acceleration performance.
Combining the design requirement the paper design the hardware and software of the kind of air-condition controller. The SOFTTUNE 89F538 is the core microprocessor of hardware circuit and the software adopt C's programming language. The paper discussed the test means of software, the result of test shows that the software meet the demand completely.
Now, the kind of auto air-condition controller have been tested by means of system by VOLEO company and by means of the road auto equip by produce department of QI RUI corporation. Testing result make known that air-condition controller work is dependable, Stability, and achieving the design anticipates  demand。

Keywords: air-condition controller; intelligent control; microprocessor; BP network
目錄
摘要 I
Abstract II

第1章 緒論 1
1.1 課題背景及研究意義 1
1.2 轎車空調控制器的研究現狀及趨勢 2
1.2.1 汽車空調業的發展歷程 2
1.2.2 空調控制器的研究現狀及趨勢 3
1.3 智能控制技術在汽車空調系統控制中的應用 4
1.4 論文的主要研究內容 5
第2章 汽車空調系統原理及控制方案設計 6
2.1 汽車空調設計概述 6
2.1.1 汽車空調系統的概念和組成 6
2.1.2 汽車空調的性能評價指標 6
2.2 汽車空調配氣系統分析與設計 8
2.2.1 車內空氣的調節和控制 8
2.2.2 汽車空調配氣系統 9
2.2.3 空調風道系統總成結構 10
2.3 人機交互功能設計 11
2.3.1 按鍵功能設計 11
2.3.2 狀態顯示功能設計 12
2.4 本章小結 12
第3章 空調控制器硬件設計 13
3.1 硬件控制系統的總體設計 13
3.2 控制器硬件各功能模塊設計 15
3.2.1 核心控制微處理器的選擇 15
3.2.2 執行機構的驅動 16
3.2.3 液晶顯示和鍵盤掃描 17
3.2.4 模擬信號輸入 18
3.2.5 外部數據存儲器 19
3.2.6 電源調整模塊及看門狗電路 20
3.2.7 其它信號的輸入輸出 21
3.3 本章小結 21
第4章 智能控制技術的應用 22
4.1 引言 22
4.2 人工神經網絡的引入 23
4.2.1 人工神經網絡的發展簡介和特點 23
4.2.2 人工神經元模型 23
4.2.3 人工神經網絡的基本結構類型及特性 25
4.3 BP網絡的模型和BP算法 27
4.3.1 BP網絡的模型結構 27
4.3.2 BP網絡的誤差反向傳播算法 28
4.4 混合風門位置的神經網絡模糊控制 35
4.4.1 模糊神經網絡的結構 35
4.4.2 模糊處理生成初始訓練樣本 36
4.4.3 模糊神經網絡的學習 36
4.4.4 神經網絡模糊控制器的實現 40
4.5 本章小結 42
第5章 空調控制器的軟件系統設計 43
5.1 軟件技術 43
5.2 系統控制軟件研究 44
5.2.1 控制器的工作模式 44
5.2.2 模擬多任務內核的軟件整體框架 44
5.3 系統軟件關鍵功能的實現 45
5.3.1 電機驅動部分 46
5.3.2 E2PROM讀寫程序 48
5.3.3 鼓風機的控制 50
5.4 背光控制 51
5.4.1 液晶顯示 51
5.4.2 模擬信號采集程序 52
5.5 軟件及系統測試 53
5.5.1 軟件測試 53
5.5.2 系統測試 54
5.6 本章小結 56
結論 58
參考文獻 59
致謝 63