摘 要
艦船電力系統在實際運行中，由于戰斗損耗、操作失誤或設備故障等問題，可能使系統處于非正常狀態，嚴重威脅艦船電力系統可靠運行。因此，在艦船建造初期合理規劃艦船電能管理方案，使其既滿足電力系統安全經濟運行，又滿足未來供電負荷增長需求；同時，在實際運行中檢測和控制艦船區域配電系統的電能，對保障艦船安全運行都是非常有必要的。
本文提出了一種基于艦船電力系統的潮流分析算法，利用該算法在電力系統規劃時可以有效進行艦船配電網電能管理和分析；同時設計了一種基于DSP(數字信號處理器)的適合用于船舶環境下的電能管理系統，利用DSP芯片強大的數據處理和智能控制功能進行區域配電網的電能管理，為艦船電力系統電能管理提供可靠的依據和方法。
借鑒用于配電網絡三相潮流計算的前推回代方法，建立了適合艦船電力系統特點的三相潮流計算模型和方法。首先根據艦船電力系統結構特點，建立了船用配網各種元件的相域模型，對饋線、變壓器、電容器、發電機等元件全部采用三相模型。在此基礎上對用于配電網絡的前推回代潮流計算方法進行了改進，使之能處理PV節點問題，同時能夠處理三相變壓器模型。對于艦船電力系統可能存在的少環結構運行方式，給出了一種基于疊加原理的少環配電網絡三相潮流計算方法。通過疊加原理將配電網絡分解為兩個容易求解的純輻射型網絡和純環狀網絡，兩種網絡的求解結果疊加并迭代求取整個網絡的三相潮流。本文利用一個典型的艦船電力系統進行了驗算，給出了計算結果。結果表明，所提出的算法能夠適用于艦船電力系統的潮流分析，并具有迭代次數少，計算速度快的特點。
根據艦船電力系統的特點設計了適用于區域配電系統的電能管理系統的軟硬件。硬件設計包括濾波電路、信號調理電路、光耦隔離電路、A/D采樣電路、控制電路、CAN通信接口電路和DSP最小系統等；軟件設計包括程序初始化、A/D采樣程序、數據處理算法程序、CAN通信接口程序、上位機人機界面等?？紤]到船舶電網和陸上電網的不同點，著重加強了系統的抗干擾設計和數據通信穩定性的設計，最后在船舶電站實驗室進行軟硬件聯調測試，獲得測試結果。實驗表明，本文提出的潮流算法能快速高效的分析和管理艦船電力系統的電能走向，本電能管理系統具有很高的測量控制性，通信穩定、可靠，有良好的應用前景。

關鍵詞 艦船電力系統；電能管理；潮流計算；區域配電







Abstract
In actual operation, due to fighting corruption, operational errors or equipment failures and other problems, the ships’ power system may be running on non-normal states, which seriously threaten the system stability and reliable operation. At the same time as the increased use of pulsed power systems, will also affect the stability of the ships’ power system operation. Thus, in the early stages of the manufacture of ships, rational planning of ship energy management program, to make the program both to meet the safe operation of power systems, but also to meet future electricity load growth needs; meanwhile, detecting and controling the power of the ships' power system, and to ensure the safe operation of ships. These are very necessary for he safe operations of ships’ power system.
This thesis presents a flow analysis algorithm which based on the ships’ power system, the thesis also deals mainly with a power management system which based on DSP (Digital Signal Processor) and suited for shipboard environment. With the powerful data processing and intelligent function chip, the system can manage the power of the regional power system extremely well. So it can provide accurate proof in testing shipboard power management.
A modified forward/backward sweep algorithm for shipboard power system load flow calculation is proposed in this thesis, which is derived from the traditional three-phase backward/forward power flow method for distribution network. Firstly, three-phase models for shipboard power system elements are established according to the features of SPS. Based on this, the backward/forward power flow method for radial distribution network is extended in order to deal with PV node and transformer model. For weakly meshed distribution network, a new three-phase power flow method based on the superposition principle is presented. The weakly meshed network is firstly divided into two networks using the superposition principle: one is the pure radial network and another is the pure meshed network. Three-phase power flow is solved separately on both the networks. The solutions are superposed together, and the final power flow solution is obtained by repeating to solve the power flow of the two networks. The presented method is tested by a typical shipboard power system, and the power flow solution is given. The results indicate that the proposed method is effective.
According to the characteristics of ships’power system, designing the hardware and software of energy management system for the regional distribution system. The hardware design includes filter circuit, signal conditioning circuit, optocopler isolation circuit, A/D sampling circuit control circuit, CAN communication circuit and DSP minimum system. The software design includes the initialization program, A/D sampling program, data processing algorithm program, CAN communication program and man-machine interface program. Taking into account the differences between the ship power grid and land powe..