組合鏜床畢業設計

有設計前期所有資料開題報告，審查表，外文翻譯，任務書，設計說明書及所有圖紙


目   錄

1   緒論 1
1.1 概述 1
1.2 行業企業產品結構的變化 1
1.3 目前我國組合機床及其自動線的發展特點 1
1.4 組合機床技術裝備現狀與發展趨勢 2
2   總體設計 4
2.1 被加工零件圖 4
2.2 組合機床的設計步驟 4
2.3 機床主軸箱設計 15
2.4 液壓系統的設計 21
2.5 電液控制系統的設計 23
3   部件設計 26
3.1 液壓滑臺的設計 26
3.2 夾具的設計 27
3.3 油缸的設計 32
4   機床的裝配、調整與精度檢驗 36
4.1 檢驗項目 36
4.2 常用測量工具 36
4.3 部件裝配和精度檢驗 36
5   機床的總裝與調整 38
6   機床設計的特點與不足之處 39
結束語 40
致  謝 41
參考文獻 42

畢業設計說明書（論文）中文摘要

組合機床是根據工件加工需要，以大量通用部件為基礎，配以少量專用部件組成的一種高效專用機床。由于通用部件已經標準化和通用化，可根據需要靈活配置，能縮短設計和制造周期。因此，組合機床兼有低成本和高效率的優點，在大批、大量生產中得到廣泛應用，并可用以組成自動生產線。應用組合機床加工大批量零件，快速高效，生產率高，是機械加工的發展方向。本次畢業設計在仔細分析研究當前主要的幾種組合機床的結構方案的基礎上，把握住其發展趨勢，力求設計研制出更加高效低耗的機床。本次設計主要為加工齒輪泵體孔，所以選擇臥式雙面鏜孔組合機床，并在設計中對零件的定位、夾緊、刀具選擇、動力箱、主軸箱、動力滑臺和被加工件夾具等部件的選擇及設計計算加以闡述。

關鍵詞：  組合機床  設計  機械加工

 
畢業設計說明書（論文）外文摘要
Title  Combination machine tool design for processing the gear-pump holes                                                   
Abstract
Combination machine tool is a kind of high-efficiency appropriation machine tool that was based on the machining needs of the work piece, it takes a great deal of general use parts as the foundation and goes together with a few tied parts. Since the general use parts have already been standardized and all-purposed, we can according to the needs collocate it agile, shorten the design and manufacturing periods. Therefore, the combination machine tool has the advantages of low cost and high-efficiency ,so it gets the extensive application in the large quantities produce and mass-produce, and can be used to constitute the automatic production line. Using the combination machine tool to produce  a great deal of parts, quickly and efficiently, of which the rate of the productivity is high, is the development direction of the machine process. This graduation design is based on the anatomized configuration researches of the present mainly combination machine tools, hold its develop current, try hard to design much more higher efficiently and lower consume machine tolls. This design is mainly for processing the gear-pump holes , so I choose horizontal two sides holes drilling combine machine toll, and in the design I expatiate the choices and the design accounts of the orientation 、clamp、tools choices、drive box、headstock 、dynamical slipway and the tongs of the parts.

Key words:  Combination machine tool  design  machine process