Metal-ceramic coatings have been widely used for industrial applications, mainly in the gas turbine and
diesel engine industries as thermal barrier coatings (TBCs). Conventional thermal barrier coatings consist
of a metallic bond coat and an insulating ceramic topcoat. Temperatures and temperature gradients
in the coating during plasma spraying play an important role on the final coating quality, especially the
temperature of the particles just hitting the substrate surface. In this work, metal-ceramic coatings were
applied on nickel-superalloy substrates. The temperatures of both the coating surface and substrate were
measured during spraying. The adhesion of the coatings was determined using ASTM C 633 and correlated
with the measured temperatures. Optical pyrometry and thermocouples were used to measure the
interfacial and substrate temperatures, respectively. Temperature was shown to have a significant influence
where lower interfacial temperatures were found to result in lower adhesion values.

金屬陶瓷涂層已被廣泛用于工業應用，主要是在燃氣輪機和柴油發動機行業的熱障涂層（TBCs).傳統的熱障涂層是由一個金屬粘結層和絕緣陶瓷面漆構成.溫度和在涂層的溫度梯度在最終涂層質量上在等離子噴涂上發揮重要作用.特別是對粒子的溫度只是命中襯底表面,在這項工作中，金屬陶瓷涂料適用于鎳合金基板.在涂層表面和襯底之間的溫度噴涂間測量.粘附涂層決定使用美國ASTM c 633和與實測的溫度相關.光學和熱電偶分別用來衡量界面和襯底溫度.溫度顯示在被發現結果在較低的粘附的價值觀有重大影響的情況下降低界面的溫度.