新型底入式磁傳動攪拌裝置的設計（畢業設計）



最新畢業設計，含有畢業設計說明書，CAD圖紙，外文翻譯，開題報告全套畢業設計資料~





摘     要

磁傳動是一種將動密封轉化為靜密封的方法，對于高壓釜和反應介質是易燃、易爆、劇毒的反應釜，磁傳動是唯一的選擇。本文根據底入式磁傳動攪拌器設計要求與基本參數，進行零部件具體設計、計算及校核、總體設計及基于Pro-E的三維造型及動態仿真。底入式與傳統頂入式磁傳動攪拌器相比在高轉速的情況下具有明顯的優勢，但設計上有其難點。新開發的底入式磁傳動攪拌器采用帶有彈性隔離膜的新結構壓力自平衡裝置,其保證了磁傳動腔體內的油壓始終高于釜內物料壓力，防止釜內腐蝕氣體及固體顆粒泄漏到磁傳動腔體，避免了軸承和磁組件受損。該設計解決了目前國內外底入式磁傳動攪拌器存在的問題，確保了磁傳動攪拌器長期正常工作，這種磁傳動攪拌器將被廣泛的應用于化工等行業。


 




關鍵詞：磁傳動攪拌器；底入式；壓力自平衡裝置；Pro-E

ABSTRACT

Magnetic transmission is a measure which can be changed dynamic seal into static seal. For autoclave with high pressure and chemical reactor in which the reacting media is inflammable, or explosive, or highly toxic, or evaporable, the magnetic transmission should be an only choice. In this paper, according to the type of magnetic transmission blender design requirements and basic parameters, specific design, calculation and parts check, overall design and based on the Pro-E 3D modeling and dynamic simulation. Magnetic transmission blender installed from bottom compared with form top has obvious advantages at a high speed, but the design was with some difficulties. The new pressure auto-balancing device with a elastic separation film were used in newly developed magnetic transmission blender installed from bottom. It assured that the oil pressure of the body cavity of magnetic transmission is always higher than the material pressure of the autoclave, preventing the corrosion gas and the solid particle in the autoclave to leak out of the cavity of the magnetic transmission. The design solves the home and abroad magnetic transmission blender existing problems and ensures the magnetic transmission blender long-term work normally. This kind of magnetic transmission blender will be widely used in chemical industry.


 


 




Key words: Magnetic transmission blender；Installed from bottom； Pressure auto-balancing device；Pro-E


 

目       錄


摘     要 I

ABSTRACT II

第一章  緒論 1

1.1攪拌器的應用 1

1.2 磁傳動攪拌器的基本工作原理 2

1.3 磁傳動技術在攪拌器上的應用結構 2

1.4 國內外磁傳動攪拌技術的發展 6

1.5 課題研究?jī)?nèi)容及目標 7

第二章  攪拌器的選型及功率計算 8

2.1 初始參數 8

2.2 攪拌器類型的選擇 8

2.3 攪拌功率計算 9

第三章  零件設計 10

3.1 密封罩設計及計算 10

3.2 軸的設計及計算 10

3.3 法蘭與螺栓設計及計算 17

第四章  壓力自平衡裝置的設計 32

4.1 壓力自平衡裝置的工作原理 32

4.2新型壓力自平衡裝置 32

第五章  總體結構設計 34

5.1外磁環座、減速器、過渡法蘭和支架部分 34

5.2 磁傳動部分 35

5.3 傳動軸的支撐部分 35

5.4 機械隔離與冷卻部分 35

第六章 新型底入式磁傳動攪拌器基于PRO/E軟件三維造型以及動態仿真 37

6.1 新型底入式磁傳動攪拌器零件部分的三維造型 38

6.2 新型底入式磁傳動攪拌器整體結構的動態仿真 40

參考文獻 42

致謝 44