設計多功能視力保護器的重要意義

本文共26頁，10660字
摘 要
目前，青少年視力低下，已成為國內外共同關心的公共衛生問題。資料顯示，我國小學生視力低下率為 26.96%，初中生 53.43%，高中生 72.8%，大學生 77.95%。特別是調查顯示 50%以上的學生及家長缺乏視力保健最基本的科普知識，不懂得“近視與盲只差一步”的危害性，因而有 41.6%視力低下的學生并未采取任何矯正措施，并且缺乏專業機構的治療。為了分析視力的保護問題，并為采取合理措施提高視力保護提供依據，對視力保護器的研究和設計是首要解決的問題。
本設計以超聲波技術為主要理論依據。具體就視力保護器的理論與硬件的設計進行了研究。
基于實驗室現有的硬件平臺，本文的研究目標是完成多功能視力保護器的硬件開發與設計，并完成相應的硬件制作。其研究?jī)?nèi)容分為兩部分：對視力保護器的硬件設計和硬件制作。在設計中存在著如何有效的提高視力保護以及對硬件電路準確調試的難點。在硬件設計中，基于超聲波技術設計的多功能視力保護器電路，通過超聲波接收頭對接收的超聲波信號進行調制輸出，實現控制聲光提示電路工作的理論研究有一定的研究意義。
本文設計出了基于超聲波發射與接收技術的多功能視力保護器。通過實踐證明該視力保護器可行且可靠性良好，使用方便。本文期望通過該電子硬件的制作和理論的研究，能為后期進一步設計多功能視力保護器并采取合理措施提高視力保護的有效性提供可靠和有效的數據源和信息依據。


關鍵詞：視力保護器，多功能，超聲波



Abstract
At present, young people in poor eyesight, has become a common concern to the domestic and international public health problem. Data show that China's primary vision for the lower rate of 26.96%, 53.43% junior high school, high school students 72.8%, and 77.95% of university students. In particular survey shows 50% more of the students and parents lack the most basic health care vision in the area of knowledge, do not know "Blind myopia with only one step" harmful, hence poor eyesight 41.6% of students did not take any corrective measures, and the lack of professional treatment. In order to analyze the visual protection, and to take reasonable measures to enhance the protection provided visual basis, right vision for the protection of the research and design is the primary solution to the problem.
The design of ultrasonic technology as the main theory. Specific vision for the protection of the theory and hardware design of the study.
Based on the laboratory's existing hardware platforms, the study aims to complete multi-functional vision for the protection of the hardware development and design and complete the corresponding hardware production. Its content is divided into two parts : the right vision for the protection of the hardware design and production of hardware. In the design of the existence of effective ways to protect and enhance vision for accurate circuit debugging difficult. In hardware design, based on ultrasonic technology of multi-circuit protection of eyesight, ultrasonic receiver through the first right to receive the ultrasonic signal modulation output. achieve sound and light control circuit theory study a certain significance.

This paper describes the design based on the ultrasonic transmitter and receiver technology for the protection of multi-functional vision. Practice has proven through the vision Protection feasible good reliability and convenient. In this paper, and hope that through the electronic hardware production and theoretical research, for the latter part of the further design multifunctional vision for the protection and take reasonable measures to enhance the effectiveness of protection vision to provide reliable and effective source of data and information based.

Keywords: visual protection; Multifunctional; Ultrasonic

目錄
1緒論 1
1.1本設計的研究背景及目的 1
1.2 國內外研究現狀 1
1.3 本設計的研究方法和研究?jī)?nèi)容 1
1.3.1本設計的研究方法 1
1.3.2本設計的研究?jī)?nèi)容 2
2 本設計總體設計方案 3
2.1 方案論證與比較 3
2.2本設計方案選擇 6
2.3本設計總體設計方案 6
3 多功能視力保護器電路設計與計算 7
3.1測距電路的設計與計算 7
3.1.1電路的選擇 7
3.1.2元器件的選型及參數計算 7
3.2測光電路的設計與計算 8
3.2.1電路的選擇 8
3.2.2 元器件的選型……………………………………………………………….8
3.3定時電路的設計與計算 8
3.3.1電路的選擇 8
3.3.2元器件的選型及參數計算 8
3.4多功能視力保護器的總電路圖 18
4電路調試及結果分析 19
4.1測距電路的測試結果及分析 19
4.2測光電路的測試結果及分析 19
4.3定時電路的測試結果及分析 19
4.4電路實現的功能及分析 20
5結論與展望 20
5.1結論 20
5.2展望 21
參考文獻
[1].家庭電子雜志社.家庭電子1998年合訂本.1999. 212
[2].康華光.電子技術基礎模擬部分.北京：高等教育出版社，2005.
[3].康華光.電子技術基礎數字部分.北京：高等教育出版社，2005.
[4].x電子工藝實習.成都：x，2003.1-23
[5].x電子技術實驗. 成都： x， 2005.1-20
[6].電子線路設計•實驗•測試第二版.武漢：華中科大出版社， 2002.1
[7].趙健.實用聲光電及無線電遙控電路300例.
北京：中國電力出版社，2005.
[8].鄭浩，高靜.怎樣用萬用電表檢測電子元器件修訂本.
北京：人民郵電出版社，2005.32-66
[9].全新實用電路集粹編輯委員會編著.全新實用電路集粹.
北京：機械工業出版社，2006.56-74
[10].王新賢.通用集成電路速查手冊第二版.