国产精品婷婷久久久久久,国产精品美女久久久浪潮av,草草国产,人妻精品久久无码专区精东影业

基于單片機的加油計量系統.doc

約33頁DOC格式手機打開展開

基于單片機的加油計量系統,摘 要,是通過流量傳感器把流量信號轉換為脈沖信號,再把脈沖信號進行放大、整形等處理,使之變成標準的脈沖信號后再送入到單片機中,由單片機對脈沖進行記數、累加等工作,由此再綜合計算測出所加油的體積,并由單片機驅動led數碼管顯示部分進行數字顯示,以實現一套完整的加油計量功能。...
編號:10-24593大小:708.50K
分類: 論文>數學/物理論文

內容介紹

此文檔由會員 劉陽 發布

基于單片機的加油計量系統

摘 要

基于單片機的加油計量系統,是通過流量傳感器把流量信號轉換為脈沖信號,再把脈沖信號進行放大、整形等處理,使之變成標準的脈沖信號后再送入到單片機中,由單片機對脈沖進行記數、累加等工作,由此再綜合計算測出所加油的體積,并由單片機驅動LED數碼管顯示部分進行數字顯示,以實現一套完整的加油計量功能。本系統同樣適用于對一般的液體流量計量,擁有較強的通用性和較高的擴展性。

Abstract
Base on micro-controller topping-up measure system, is acting as the rate of flow signal conversion to the impulse signal by means of the rate of flow sensor, causing it turn into the criterion impulse signal afterwards to carry up the micro-controller again, and bears in mind work such as figure and accumulating and so on to the impulse through the micro-controller, the bulk lubricated is fathomed out in synthetically calculation more thus to handles such as enlarges the impulse signal and plastic and so on again , and displaying partly carrying on the DD digital display through micro-controller drive LED's nixie light , in order to achieve one suit of integrated topping-up measure meritorious service capacity . That this system is applicable equally to calculates to the ordinary liquid rate of flow, and haves more powerful commonality and the taller augment ability.

關鍵詞:?jiǎn)纹瑱C(jī),脈沖,計量
Keywords: micro-controller pulse measure


目   錄
一、 前言……………………………………………………………………1
二、 總體方案設計…………………………………………………………2
1、方案比較……………………………………………………………2
2、方案論證……………………………………………………………2
3、方案選擇……………………………………………………………3
三、單元模塊設計……………………………………………………………3
1、各單元模塊功能介紹及電路設計…………………………………3
2、元器件的選擇………………………………………………………6
3、特殊器件的介紹……………………………………………………7
4、各單元模塊的聯接…………………………………………………18
5、干擾的分類…………………………………………………………18
四、軟件設計…………………………………………………………………22
1、軟件設計原理及設計所用工具……………………………………22
2、定時器/計數器的結構……………………………………22
五、系統調試…………………………………………………………………33
六、系統功能…………………………………………………………………33
七、設計總結…………………………………………………………………34
八、參考文獻…………………………………………………………………34