論文標準WORD格式排版69頁

摘要
空調系統是智能建筑中樓控系統的主要組成部分，但也是系統能耗的主要部分。隨著人們生活水平的不斷提高，空調系統被廣泛的使用，節腀@晌嗣瞧氈楣刈⒌奈侍?。由釉r浞緦靠盞饗低誠災慕諛芴氐悖蠱涑晌盞饗低車鬧髁鰲Ｍ泵攔鏡腗ETASYS智能樓宇管理系統，以其獨特的優越性，使得空調節能得以更好的發揮。
本文首先對變風量（VAV）空調系統和江森的智能樓宇管理系統——METASYS系統作了概述，還對VAV系統的控制原理和方法進行了分析和詳細說明。通過分析確定系統的監控點、設備的選型，運用組態軟件設計METASYS系統的上位機人機界面，最后在MATLAB/Simulink環境下對表冷器和變風量末端的控制器進行了仿真。

關鍵詞： 節能，VAV空調系統，METASYS系統

Design of Air Conditioning control system
戀愀猀攀攙 on METASYS

Abstract
The air-conditioning system is the main constituent of the building controls system in the intelligent building, and is the main part of system energy consumption. Along with the enhancement of people living standard, the air-conditioning system were widespread used, energy saving became the universal matter of people concerned. Because of Variable Air Volume air-conditioning system’s remarkable characteristic of energy saving, it become the mainstream of air-conditioning system. Simultaneously the American company JOHNSON-METASYS intelligence building management system having its unique superiority, that makes the energy saving of air-conditioning system better.
Firstly, this paper gives the outline of the Variable Air Volume (VAV) air-conditioning system and the JOHNSON—— METASYS intelligent building management system, also has analysis and specified the VAV system control principle and the method. By the analysis, determining system monitoring point, choosing the equipment, has designed the METASYS software configuration on workstation was successfully. Finally, the simulation to the cooling coil and VAV terminal controller were carried on in MATLAB/Simulink environment.

Key word: Energy saving，VAV air conditioning system，METASYS system

目錄
1.緒論1
2.變風量（VAV）空調系統的簡介2
2.1變風量系統的基本概念2
2.1.1 VAV系統的基本組成3
2.1.2 VAV系統的特點4
2.1.3 變風量（VAV）末端裝置6
3.METASYS的系統概述8
3.1硬件結構8
3.1.1 概述8
3.1.2 網絡通訊9
3.1.3 聯網能力11
3.1.4 操作站11
3.1.5 記錄/報警打印機13
3.1.6 網絡控制器（NCU）13
3.1.7 直接數字控制器（DX-9100-8154 / XT-XP模塊）14
3.1.8 現場設備15
3.1.9 程序存貯器15
3.1.10 系統的運行環境要求及用電量16
3.2軟件功能說明16
3.2.1 摘要（各類報告清單）16
3.2.2 密碼保護功能17
3.2.3 用戶圖形化編程語言17
3.2.4 狀態改變報告18
3.2.5 報警信息報告及報告分組/報警管理18
3.2.6 監控點歷史18
3.2.7 動態趨勢分析18
3.2.8 累積、統計功能19
3.2.9 數據庫下傳/上載功能19
3.2.10 動態圖形顯示及操作站工作環境19
3.2.11 能量管理控制19
3.2.12 時間預定功能19

3.2.13 設備循環啟/停/及重大設備啟/停延時保護20
3.2.14 供電恢復啟動程序20
3.2.15 用電量限制/負載循環20
3.3 江森自控集成式可變風量末端單元控制組合——VMA1400系列產品21
4.變風量（VAV）空調系統的控制方法及原理24
4.1變風量空調系統的控制方法24
4.1.1 自動控制系統的要求24
4.1.2 變風量系統的自動控制方法25
4.1.3 VAV系統的控制對象28
4.2 變風量空調自控系統的控制原理31
4.2.1 變風量空調系統分析31
4.2.2 末端調節的變風量系統TRAV33
4.2.3 變風量空調系統的組成36
4.3 各回路控制原理37
4.3.1 溫度控制回路37
4.3.2 壓力（靜壓）控制回路40
4.3.3 新風量（CO2濃度）控制回路43
4.4 VAV空調系統的監控和設備選型44
4.4.1 空調機組自控方式和說明44
4.4.2 空調系統設備的選型46
4.5用組態王軟件設計METASYS系統的上位機人機界面47
5.控制器設計和仿真50
5.1表冷器控制器參數的確定52
5.2 變風量末端控制器參數的確定55
6.總結60
參考文獻61
附錄62
致 謝66