倒立擺系統

全文51頁 約20000字 論述翔實

摘要
在利用傳統控制方法對倒立擺控制，相對于其他方法，狀態空間的方法是實踐的比較成功的。倒立擺系統是一個復雜的、非線性的、不穩定的系統。倒立擺的鎮定控制是控制理論與應用學科的一類典型問題，引起了控制理論及應用界的廣泛關注。本文從倒立擺的已有鎮定方法出發，系統分析了各種鎮定方法的的優點和缺點，為了簡單方便，利用狀態空間方法，經實驗仿真與實驗驗證實現了對倒立擺的穩定控制，從而達到了較理想的性能指標。

關鍵字：倒立擺系統，穩定性，狀態空間，魯棒性，狀態反饋，輸出反饋 線性系統

Summary
Along with the development of the ages, the inverted pendulum are concerned the more and more the researcher's which extensive concern in modern theories of control.The inverted pendulum is the system, which is a complicated, the non-linear and unsteady system.By using of the tradition control method and putting the control to the inverted pendulum,compared to other method, the state space method in appearance is a fulfillment more successful.The inverted pendulum put composed control is extensive concern that a typical model to control the theories and apply the course problem, caused the control theories and apply.This text puts from the inverted pendulum of there has been the town settles the method sets out, the system analyzed each kind of the method of composedness with advantage and weakness, for the sake of simple and convenience, by using of the state space method, it was imitated by experiment true with experiment the verification realizes the stability that put controls to the inverted pendulum, which getting the ideal function index sign.
Key word:
The system of the inverted pendulum, stability, state space, Robust , state feedback, output feedback,linear system

目錄
前言…………………………………………………………………….
1．緒論…………………………………………………………………….
1-1 倒立擺的概述…………………………………………………..
1-2 倒立擺的幾種控制方法………………………………………..
1-3 本篇論文的基礎………………………………………………..
1-4 仿真驗證軟件…………………………………………………..
2．倒立擺系統的數學建?！?br>2-1數學建模………………………………………………………
2-2傳遞函數……………………………………………………….
2-3狀態方程………………………………………………………
3. 模型特性分析及控制器的構造…………………………
3-1定性…………………………………………………………..
3-2定量分析……………………………………………………..
3-3性能指標………………………………………………………
3-4控制器…………………………………………………………
3-5控制器的基本特征…………………………………………….
4.控制器的驗證………………………………………………
4-1仿真驗證………………………………………………………
4-2實驗平臺………………………………………………………
5.軟件程序與編譯………………………………………………
5-1軟件程序……………………………………………………..
5-2 編譯…………………………………………………………
總結………………………………………………………………
結束語………………………………………………………………
鳴謝語…………………………………………………………………
附錄一：源程序………………………………………………………..
附錄二：函數說明…………………………………………………….
附錄三：操作說明…………………………………………………….
參考文獻……………………………………………………………….

部分參考文獻

[22]劉清，謝建凱，丁琳，小車倒立擺的模糊控制仿真研究，2002
[23]崔平，翁正新，基于狀態空間極點配置的倒立擺平衡控制，實驗室研究與探索VOL.22 NO.2 2003.4
[24]李俊芳，牛文興，張振東，基于狀態空間法的倒立擺系統穩定控制，天津理工學院學報 VOL.19 NO.2,2003.6
[25]吳楠，單級倒立擺系統角運動控制方案建模及仿真，系統仿真學報 VOL.15 NO.9 2003.9
P1333-1336
[26]牛月蘭，馮巧玲等，二級倒立擺控制器的仿真與設計，計算機仿真 VOL.20 NO.9,2003
P137-139