鼠標本體的逆向造型和模具設計

【摘  要】：隨著科技不斷發展，企業也在不斷的追求更好，更快的生產方式，生產技術也不斷的研發創新，來跟上時代的步伐。逆向工程技術已經成為了當今產品設計師對產品設計和優化的重要手段之一。本文是以普通的鼠標本體為模型，通過逆向工程技術設計普通鼠標本體的三維模型，并設計鼠標本體模具的整個過程。
　　　由于鼠標本體曲面比較難以測繪，所以選擇使用逆向工程技術進行模型的重建、優化。首先，由于鼠標本體為黑色，需要進行反光處理，要在鼠標本體表面噴上顯光劑；然后，連接REVscan激光掃描儀與電腦等掃描工作準備好后，通過儀器的掃描獲得鼠標本體的點云數據；其次，在處理鼠標本體的點云數據時，我們使用的是Geomagic Studio 軟件，此軟件能根據實物的點云數據對數據進行預處理和曲面重構；當處理好精確曲面后，保存成pro-e通用的格式——iges文件；然后在pro-e中打開進行實體處理，完成整個鼠標本體的重構；最后通過快速成型技術做出鼠標本體的模型，再寫出鼠標本體的模具的設計計算過程。
【關鍵詞】：逆向工程，模具設計，曲面處理，三維建模
　　　 
　　　Reverse mouse ontology modeling and design of the die
　

【Abstract】: With the continuous development of science and technology, companies are in constant pursuit of better, faster production, production technology keeps on research and innovation, to keep pace with the times. Reverse engineering has become today's product designers are one of the important means for product design and optimization. This article is based on modest mouse ontology for modeling, by reverse engineering design of a normal mouse ontology model of three dimensional and design mold throughout the main body of the mouse.
   As the mouse body surfaces are more difficult to survey and mapping, so optimization of model reconstruction, using reverse engineering techniques. First of all, as the mouse body is black, need to be reflective, light on body surface of the mouse you want to display agent; Then, connect REVscan laser scanner scanning to your computer when you're ready, through the instrument of scanned point cloud data of the main body of the mouse and, secondly, in the processing of point cloud data of the main body of the mouse, we're using Geomagic Studio software, this software according to the kind of data pretreatment and surface reconstruction from data cloud; Secondly, in the processing of point cloud data of the main body of the mouse, we're using Geomagic Studio software, this software according to the kind of data pretreatment and surface reconstruction from data cloud; when dealing with precise surface, save as a common Pro-e format--IGES file; then open the entity dealing with Pro-e, to complete the reconstruction of the main body of the mouse; Finally by rapid prototyping techniques mouse ontology model, and then writes out the mold design process of the main body of the mouse.
【Key words】: reverse engineering，  mold design，  Surface treatment，  3D modeling

    目錄
　摘要1
　關鍵字1
1 緒論 5
1.1 課題的研究意義 5
1.2 逆向工程的基本概念 5
1.3 逆向工程的發展?fàn)顩r 6
1.4 逆向工程的應用領域 6
1.5 本課題研究內容： 7
2 逆向工程的基本步驟 7
2.1 點云數據的采集 7
2.2 掃描儀REVscan介紹 8
2.3 鼠標本體的掃描過程 9
2.3.1 準備工作 9
2.3.2 掃描過程詳解 10
2.4 本章小結 11
3 鼠標本體的逆向造型建模和快速成型 11
3.1 逆向造型軟件介紹 11
3.1.1 Geomagic Studio軟件的介紹 12
3.1.2 Pro/E軟件介紹 12
3.2 鼠標本體的逆向工程建模過程 12
3.3 鼠標本體的三維建模和快速成型 21
3.4 本章小結 24
4 鼠標本體模型的模具設計 24
4.1 鼠標本體的工藝分析 24
4.2 注塑工藝分析 24
4.3 鼠標本體模具澆注系統設計 26
4.3.1 主流道 26
4.3.2 分流道設計 28
4.3.3 澆口設計 28
4.3.4 冷料井的設計 28
4.3.5 排溢系統設計 29
4.4 側向分型面與抽芯機構的設計 29
4.5 成型尺寸計算 29
4.5.1 凹模的設計 29
4.5.2 型芯尺寸的計算 30
4.5.3 型芯高度尺寸的計算 31
4.5.4 中心距離的尺寸計算 31
4.5.5 模具型腔側壁和底版厚度的計算 31
4.6 導向定位機構設計 31
4.7 脫模機構設計 32
4.8 模溫冷卻系統設計計算 33
4.9 模具裝配圖 34
4.10 本章小結 34
結論 35
致謝 36
參考文獻 37