Abstract. This paper describes an interdisciplinary design project which was done under the author’s supervision by a group of four senior students in the Department of Engineer-ing Science at Trinity University. The objective of the project was to develop a temperature control system for an air-filled chamber. The system was to allow entry of a desired cham-ber temperature in a prescribed range and to exhibit over-shoot and steady-state temperature error of less than 1 de-gree Kelvin in the actual chamber temperature step response. The details of the design developed by this group of students, based on a Motorola MC68HC05 family microcontroller, are described. The pedagogical value of the problem is also dis-cussed through a description of some of the key steps in the design process. It is shown that the solution requires broad
knowledge drawn from several engineering disciplines includ-ing electrical, mechanical, and control systems engineering.

摘要 介紹了一個跨學科的設計項目，由一組的四名學生在圣三一大學的 Engineer¬ing 科學系作者的監督下完成。該項目的目標是發展空氣 filled 室中的一種溫度控制系統。允許在規定的范圍內所需的 cham¬ber 溫度的條目，并展示 over¬shoot 和穩態溫度誤差小于 1 的學位開氏實際室溫度階躍響應中的系統。描述了由這批學生，摩托羅拉 MC68HC05 的家庭單片機開發設計的詳細信息。教學價值的問題也被 dis¬cussed 通過一些設計過程中的關鍵步驟的說明。它是顯示該解決方案需要來自 includ¬ing 電氣、 機械、 的幾個工程學科的廣泛知識，并控制系統工程。