畢業設計：閥體工藝規則設計與銑夾具設計
論文說明書共42頁，字?jǐn)?shù)總計：17411
資料簡介：
A2-夾具體.dwg
A4-定位支撐.dwg
工藝卡+工序卡.dwg
A2-銑夾具裝配圖.dwg
A4-活動V型塊.dwg
A3-閥體毛坯圖.dwg
A3-閥體零件圖.dwg
畢業設計說明書：閥體工藝規則設計與銑夾具設計.doc
目錄.doc
畢業設計任務書.doc
答辯稿.ppt
畢業設計說明書目封面.doc
目 錄
摘要 1
Abstract 2
第1章 緒論 3
1.1課題背景 3
1.2夾具的發展史 3
1.3小結 4
第2章 零件的分析 5
2.1零件的作用 5
2.2零件的工藝分析 5
第3章 工藝規則設計 7
3.1確定毛坯的制造形式 7
3.2毛坯的設計 7
3.3選擇定位基準 7
3.3.1 精基準的選擇 8
3.3.2 粗基準的選擇 9
3.4制定工藝路線 10
3.4.1 工序的合理組合 10
3.4.2 工序的集中與分散 10
3.4.3 加工階段的劃分 11
3.4.4 工藝路線 12
3.5機械加工余量、工序尺寸及毛坯尺寸的確定 14
第4章 確定切削用量及工時 16
第5章 夾具設計 27
5.1設計夾具的目的 27
5.2夾具的分類 27
5.3專用夾具的組成 29
5.4典型的定位元件 29
5.5夾具中的夾緊機構 31
5.6夾具的發展趨勢 32
5.7本課題夾具設計 33
5.7.1 問題的提出 34
5.7.2 定位基準的選擇 34
5.7.3 切削力及夾緊力計算 34
5.7.4 定位誤差分析 36
5.7.5 定向鍵與對刀裝置設計 36
5.7.6 夾具設計及操作簡要說明 39
結論 40
致謝 41
參考文獻 42

摘 要
本次設計內容涉及了機械制造工藝及機床夾具設計、金屬切削機床、公差配合與測量等多方面的知識。
閥體加工工藝規程及其鉆孔的夾具設計是包括零件加工的工藝設計、工序設計以及專用夾具的設計三部分。在工藝設計中要首先對零件進行分析，了解零件的工藝再設計出毛坯的結構，并選擇好零件的加工基準，設計出零件的工藝路線；接著對零件各個工步的工序進行尺寸計算，關鍵是決定出各個工序的工藝裝備及切削用量；然后進行專用夾具的設計，選擇設計出夾具的各個組成部件，如定位元件、夾緊元件、引導元件、夾具體與機床的連接部件以及其它部件；計算出夾具定位時產生的定位誤差，分析夾具結構的合理性與不足之處，并在以后設計中注意改進。

關鍵詞：工藝、工序、切削用量、夾緊、定位、誤差。


Abstract
This design content has involved the machine manufacture craft and the engine bed jig design, the metal-cutting machine tool, the common difference coordination and the survey and so on the various knowledge.
Body process planning and drilling fixture was designed to include part machining process design, process design, and dedicated fixture design of three parts. In process design, analysis of the part must first understand the parts of the process re-engineering the structure of a blank, and select a good part of the processing of the base to design parts process route; followed by the various working steps on the part of the procedures for the size of the calculation, the key is to determine the various stages of work out of process equipment and cutting consumption; then dedicated fixture design, selection of design out of all the component parts fixture, such as the positioning components, clamping components, guiding elements, the specific folder connection with the machine parts and other components; calculate the positioning fixture positioning error generated, analysis fixture structure is reasonable and deficiencies, and attention to improving the design in the future.

Keywords: The craft, the working procedure, the cutting specifications, clamp, the localization, the error