畢業設計：風扇后蓋注塑模具設計（含Proe三維圖仿真加工）
論文說明書共29頁，字數總計：14617
資料簡介：
PROE圖
仿真加工
三維圖冊
文獻資料
機械加工工序卡0.doc
機械加工工序卡1..doc
機械加工工藝工序卡封面.doc
機械加工工藝卡0.DOC
機械加工工藝卡1.DOC
開題報告.doc
摘要.doc
畢業設計說明書：風扇后蓋注塑模具設計（含Proe三維圖仿真加工）.doc
說明書封面.doc
說明書目錄.doc
英文翻譯.doc
英文原文.pdf
實習報告封面.doc
實習報告.doc
選題申報表.doc
A2-定模固定板.dwg
A2-動模固定板.dwg
A3-動模座.dwg
A3-型腔.dwg
A3-型芯.dwg
A0-風扇后蓋注塑模裝配圖.dwg
A3-脫澆板.dwg
A4-螺紋型芯.dwg
A4-澆口套.dwg
A4-復位桿.dwg
A4-定位圈.dwg
A4-頂桿.dwg
A4-頂出導套.dwg
A4-導柱.dwg
A4-導套.dwg
A3-風扇后蓋.dwg
A3-定模座.dwg
A3-頂桿固定板.dwg
A3-墊板.dwg
風扇后蓋注塑模具設計
摘 要: 為了完成風扇后蓋注塑模設計，本文分析了風扇后蓋的工藝特點和工藝要求,并說明了模具工作原理。
在注塑模具中,分型面的設計將直接影響模具的復雜程度和制造成本,并對產品的質量產生影響。通過對風扇后蓋的結構和工藝性分析,比較詳細地論述了風扇后蓋注塑模具分型面的設計考慮因素。從制件和所用原材料分析入手,探討了風扇后蓋的注射成型工藝,進行了型腔和型芯的尺寸計算與強度計算。根據模具的加工性和塑料成型的工藝性要求,對注射成型塑料零件結構設計中的工藝性結構設計要點進行了系統的闡述。論述了模具的型腔布置、分型面選擇、澆注系統、成型零部件、頂出與復位機構及冷卻系統的設計特點，成功實現了模具的成型。
根據注塑模具零件結構設計的結果，對其加工工藝分析，擬定其加工工藝方案，確定各零件的加工工藝過程。考慮到零件的尺寸及精度要求，從選取模具材料出發，合理安排每個零件加工的先后順序，保證能生產出合格的零件。通過本次設計，我了解了模具的工作原理及模具主要零件的相互關系，并且對注塑模具設計的全過程有了更加深刻的認識。

關鍵詞：模具設計；風扇后蓋；工藝分析。

The design of fan-back injecting mould and simulation processing whit the cavity
Abstract: In order to complete the fan-back mold design, this article has analyzed the fan-back's craft characteristic and the technological requirement, and explained the mold principle of work.
In the injection mold, the design of parting surface will directly influence the complexity and manufacturing cost, and the product quality. Based on the structure and manufaturability analysing in detail, it discusses the parting surface design considerations of the fan-back injection mold. From the analysis of the raw material and manufacturing, It is discussed in detail the considerations of the parting surface design of fan-back of the injection mold.According to the processing manufaturability of the mould and the plastic molding technology requirements for injection molding, It is the core of the cavity and size calculation and strength calculation. Discusses the mold cavity layout, parting surface, gating system, forming parts, ejector and reset and cooling system, the success has realized mold's formation.
According to the injection mold components structural design's result, we study its processing process ,and draw up its processing craft plan, determines various components the processing technological process. Considered the components the size and the accuracy requirement, embark from the selection mold material, the possible arrangement each components processing's order successively, It guaranteed that can produce the qualified components. Through this design, I have understood mold's principle of work and the mold major parts reciprocity, and had a more profound understanding to the injection mold design's entire process.

Keywords: design of mould; fan-back; process analysis .
目　錄
1 前言………………………………………………………………………………1
2 總體方案論證…………………………………………………………………3
3具體設計說明………………………………………………………………4
3.1塑件的測繪與造型 …………………………………………………………………… 4
3.1.1 塑件的測繪………………………………………………………………………… 4
3.1.2 塑件的造型………………………………………………………………………… 4
3.2 塑件模具的設計與造型…………………………………………………………… 5
3.2.1 塑件的材料分析……………………………………………………………… …5
3.2.2塑件的結構工藝性…………………………………………………………………5
3.2.3 塑件尺寸精度……………………………………………………………………… 5
3.2.4 拔模斜度………………………………………………………………………… 5
3.3 注射機選擇…………………………………………………………………………… 5
3.4 分型面的確定………………………………………………………………………… 7
3.5 型腔數目的確定……………………………………………………………………… 8
3.6 澆注系統的選擇…………………………………………………………………8
3.6.1澆注系統…………………………………………………………………………… 8
3.6.2主流道………………………………………………………………………………9
3.6.3澆口…………………………………………………………………………… 10-..