畢業設計：連接器殼體注塑模具設計
論文說明書共46頁，字數總計：19604
資料內容簡介：
A3-連接蓋殼體零件圖.dwg
A1-定模固定板.dwg
A1-澆道卸料板.dwg
A1-動模型板.dwg
A0-裝配圖.dwg
A4-澆口套.dwg
A4-頂桿導套.dwg
A4-斜導柱.dwg
A4-頂桿導柱.dwg
A4-導套1.dwg
A4-導柱.dwg
A4-側滑快.dwg
A1-頂桿墊板.dwg
A1-頂桿固定板.dwg
A1-動模固定板.dwg
A4-頂桿.dwg
A4-復位桿.dwg
A4-鎖緊塊.dwg
A4-拉料桿.dwg
A4-定位圈.dwg
Design_and_Simulation_of_Plastic_Injection_Moulding_Process.pdf
畢業設計論文說明書：連接器殼體注塑模具設計.doc
開題報告.doc
塑料注射模擬和設計模制過程外文翻譯.doc
中期報告.doc
連接器殼體塑料注塑模具設計
摘 要
本文是關于連接器殼體塑料注塑模具的設計，通過正確分析塑件工藝特點和ABS材料的性能后，最終設計出一副注塑模。塑料制品具有原料來源豐富,價格低廉，性能優良等特點。它在電腦、手機、汽車、電機、電器、儀器儀表、家電和通訊產品制造中具有不可替代的作用，應用極其廣泛。注射成形是成形熱塑件的主要方法，因此應用范圍很廣。
注射成形是把塑料原料放入料筒中經過加熱熔化，使之成為高黏度的流體，用柱塞或螺桿作為加壓工具，使熔體通過噴嘴以較高壓力注入模具的型腔中，經過冷卻、凝固階段，而后從模具中脫出，成為塑料制品。
本文詳細介紹了模具的澆注系統、模具成型部分結構、頂出系統、冷卻系統、注塑機的選擇及有關參數的校核等等設計。運用CAD、輔助工程PRO/E等不同的軟件分別對模具的設計、制造和產品質量進行分析。連接器殼體塑料注塑模具設計，采用一般精度，利用CAD、PRO/E來設計或分析注射模的成型零部件，澆注系統，導向部件和脫模機構等等。針對連接器的具體結構，該模具采用點澆口雙分型面注射模具。由于塑件內側有小孔，需要設置斜導柱。通過模具設計表明該模具能達到連接器的質量和加工工藝要求。綜合運用了專業基礎、專業課知識設計，其核心知識是塑料成型模具、材料成型技術基礎、機械設計、塑料成型工藝、模具CAD\CAM等。

關鍵詞：連接器殼體；注塑模具；CAD；PRO/E


The connector shell plastic injection mold design
Abstract
This article is about the connector shell plastic injection mold design, through the technological characteristics of plastics article of correct analysis and the performance of ABS material, the final design out a pair of injection mold. Plastic products have rich raw material sources, low price, good performance, etc. It in computers, cell phones, cars, motors, electrical appliances, instruments and meters, household appliances and communications products manufacturing has irreplaceable function, is widely applied. Injection molding is the main method of forming thermoplastic parts, so the application range is very wide.
Injection molding is melt the plastic raw material into the cylinder through the heating, made of high viscosity fluid, pressurized with piston or screw as a tool, makes the melt through the nozzle at high pressure into mold cavity, after cooling and solidification stage, and then out of the mould, plastic products.
Mould gating system are introduced in detail in this paper, the structure of the molding part, ejector system, cooling system, selection of injection molding machine and related parameters of checking, etc. Design. Using PRO/E CAD, auxiliary engineering such as different software respectively to the mold design, manufacturing and product quality are analyzed. Connector shell plastic injection mold design, using the general accuracy and the use of CAD, PRO/E to design or analysis of forming parts of injection mould, pouring system, guide parts and demoulding mechanism, and so on. According to the specific structure of the connector, the mould adopts the point gate double parting surface injection mould. Because there are holes plastic parts inside, need to set up the inclined guide pillar. Through the mold design shows that the mould can achieve connector quality and processing technology. Integrated use of the professional basis, professional class knowledge is designed, its core knowledge is the plastic molding mold, material molding technology base, mechanical design, plastic molding process, mould CAD/CAM, etc
.
Key words: the connector shell; Injection mould; CAD; PRO/E

目 錄
1 緒論 1
1.1前言 1
1.2模具發展現狀及發展方向 1
1.2.1國內外注塑模具的發展現狀 1
1.2.2國內外注塑模具的發展趨向 3
1.3本課題的內容和具體要求 3
1.3.1本課題的內容 3
1.3.2具體要求 3
2 零件材料分析及方案論證 4
2.1零件的材料及材料的特性 4
2.1.1零件的材料 4
2.1.2 ABS材料的特點 4
2.1.3 ABS注射成型工藝參數 5
2.2 ABS注射成型的原理及工藝過程 5
2.2.1注射成型的原理 5
2.3注射模具的基本組成 6
2.3.1基本組成 6
3 注射成型機的選擇與成型腔數的確定 7
3.1注射成型機的選擇 7
3.1.1估算零件體積 7
3.1.2估算零件的質量 8
3.2鎖模力 8
3.3選擇注射機型號及注射機的主要參數 8
3.3.1注薂@尚凸ひ占蚪樽⑺芑某醪窖≡� 8
3.3.2注薂@尚凸ひ仗跫� 9
3.3.3注塑機的初步選擇 10
3.3.4 XS-ZY-125型注塑機的主要參數如下 10
3.4注塑機的校核 10
3.5成型腔數的確定 12
4 澆注系統的設計 13
4.1澆注系統的作用 13
4.2澆注系統的組成 13
4.3主流道設計 13
4.4分流道設計 15
4.5澆口設計 16
..