摘  要
   
　　　實訓設計的目的，是使學生用所學各科理論和知識和技能進行的一次綜合性的應用。本說明書敘述的是窗簾環滾輪注射模的設計。通過對窗簾環滾輪的工藝分析，設計了一套一模三塑件的塑料模具。
　　　本次設計主要是通過對塑件的形狀、尺寸及其精度的要求來進行注射成型工藝的可行性分析。塑件的成型工藝性主要包括塑件的壁厚，斜度和圓角以及是否有抽芯機構。通過以上的分析來確定模具分型面、型腔數目、澆口形式、位置大?。黄渲凶钪匾氖谴_定型芯和型腔的結構，例如是采用整體式還是鑲拼式，以及它們的定位和固緊方式。此外還分析了模具受力，脫模機構的設計，合模導向機構的設計，冷卻系統的設計等。最后繪制完整的模具裝配總圖和主要的模具零件圖及編制成型零部件的制造加工工藝過程路線。全書文字簡明，圖表、數據翔實，所設計的模具結構簡單緊湊、動作平穩可靠、制造成本低，具有一定的可操作性。
　　
關鍵詞：窗簾環滾輪；注射模；一模三件。

　　　　Abstract
　　　　
　　　The purpose of training design: To make students apply comprehensively all sorts of theoretical knowledge and skill or technique acquired in the college to practice. The direction to be described is the Curtain ring roller. A set of mould with one model and three cavities has been designed through the correct analysis of the technology of the Curtain ring roller in the training design.
　　　This design primarily possesses to piece viability assessment for request for of shape, size and its accuracy coming proceeding injecting type craft. the piece the wall for of type craft primarily including the  piece is thick, slope and circle angle and whether to have core-pulling or not mechanism. Pass the above analysis to come the certain molding tool cent the type the surface, type  the number, gate the form, place the size; The among them and most important is a certain type core and the construction of the type, for example adopt the whole the type of type still, and their fixed position and tight way of .In addition and still analyzed the molding tool to suffer force, mold that design that the design of the pattern draw mechanism, match the design etc. to lead to the mechanism, cooling system. Finally draw the production that complete molding tool assemble the general drawing sum the soil and establishment of principal molding tool parts type zero the parts process the craft process route. The script in the direction is concise and the chart and data is full and accurate. The construction of the mould is simple and impact, the movement can be smooth and reliable, and the cost of manufacture is law. It is feasible to produce by using the mould.
　　　
Key words：the Curtain ring roller；injection mould；one model and three cavities.

目    錄
引言 3
1 緒論 3
1.1 概述 3
1.2 各種模具的分類和占有量 4
1.3 課題研究的目的與意義 5
1.4 我國模具技術的現狀及今后發展趨勢 5
2  注塑件的設計 7
2.1 功能設計 7
2.2 材料選擇 7
2.3  塑件的尺寸精度及表面質量 8
2.3.1尺寸精度 8
2.3.2  塑件的表面質量 9
2.3.3  塑件體積和質量的計算 9
3  注塑成型的準備 10
3.1 注塑成型工藝簡介 10
3.2  注塑成型工藝條件 11
3.3 注塑機的選擇 13
3.3.1 注塑機簡介 13
3.3.2注塑機基本參數 13
3.3.3選擇注塑機 14
4  模具設計 16
4.1 分型面的設計 16
4.2 行腔數的確定 16
4.3 模具澆注系統設計 17
4.3.1澆口位置設計 17
4.3.2主流道和分流道設計 17
4.3.3 澆口套設計 18
4.3.4排氣方式 19
4.4 成型零件設計 19
4.4.1型腔及型芯的設計 19
4.4.2工作尺寸計算 20
4.5 模架的選取 22
4.6 導向機構的設計 22
4.7 脫模機構的設計【11】 23
4.7.1頂出機構的設計原則 23
4.7.2采用推桿脫模機構 24
4.8 側抽芯機構的設計 27
4.8.1結構及工作原理 27
4.8.2設計注意事項 27
4.8.3抽拔力 27
4.8.4抽芯距 28
4.8.5斜導柱傾斜角 28
4.8.6斜導柱的直徑 28
4.8.7斜導柱的長度計算 29
4.8.8導滑部分設計 29
4.9 冷卻裝置的設計 30
4.9.1溫度調節的必要性 30
4.9.2冷卻系統的設計原則 31
4.9.3冷卻管道傳熱面積及管道數目的計算 33
結  論 35
謝  辭 36
參考文獻 37