国产精品婷婷久久久久久,国产精品美女久久久浪潮av,草草国产,人妻精品久久无码专区精东影业

圓盤剪設計.doc

約72頁DOC格式手機打開展開

圓盤剪設計,摘要   為滿足對帶鋼切邊質量的技術要求,借鑒以往的工作及設計經驗,我設計了這臺圓盤式切邊機,并使它能夠和碎邊機、卷曲機一起來完成切邊、碎邊和卷曲等一系列的工作。在滿足生產技術要求的同時,使其制造、安裝成本及經濟效益達到設計要求。   本說明書從剪切機理、板帶的剪切變形過程,分析和計算了圓盤剪剪切力和傳動功率,介紹了圓...
編號:30-318565大小:1.36M
分類: 論文>機械工業論文

內容介紹

此文檔由會員 道客巴巴 發布

摘要
   為滿足對帶鋼切邊質量的技術要求,借鑒以往的工作及設計經驗,我設計了這臺圓盤式切邊機,并使它能夠和碎邊機、卷曲機一起來完成切邊、碎邊和卷曲等一系列的工作。在滿足生產技術要求的同時,使其制造、安裝成本及經濟效益達到設計要求。
   本說明書從剪切機理、板帶的剪切變形過程,分析和計算了圓盤剪剪切力和傳動功率,介紹了圓盤剪開口度調整裝置,剪刃側間隙調整機構和重疊量調整機構以及側間隙和重疊量對剪邊質量的影響。
   
   
關鍵詞  圓盤剪;剪切變形;切邊質量;側隙


Abstract
   To satisfy technical requirements for the quality of strip trimming, draw lessons from previous work experience and design, I designed this disc type cutting machine, and make it together with crushing machine, crimping machine to complete the trimming, broken edges and curly and so on a series of work. While meet the requirements of production technology, the manufacture, installation costs and economic benefits to meet the design requirements.
   This manual from the shear mechanism of shear deformation, plate with the process, the camber of analysis and calculation of the shear force and transmission power, and introduces the disc shear is adjusting device, cutting edge side clearance adjustment mechanism and volume quantity adjusting mechanism and side clearance and overlap on the quality of the cut edge.
   
   
Keywords Disc shear;Shear deformation;Edge quality;Side clearance


目 錄
   
摘要 I
Abstract II
第1章 緒論 1
   1.1 課題背景 1
   1.2 圓盤式剪切機國內外的發展現狀 1
   1.3 設計目的和需要解決的問題 3
第2章 設計方案 5
   2.1 設計任務 5
   2.2 方案設計 5
    2.2.1 傳動方案設計 5
    2.2.2 驅動方案設計 5
    2.2.3 執行機構的設計 6
    2.2.4 刀盤驅動傳動系統 6
    2.2.5 圓盤剪本體設計 9
第3章 主要零部件的設計與選擇 11
   3.1 主傳動電動機功率的計算和選取 11
    3.1.1  選擇電動機應綜合考慮的問題 11
    3.1.2  主傳動電機的計算 11
    3.1.3  電動機型號的確定 15
   3.2 開口度調節電機的選擇 15
   3.3液壓螺母的設計 16
    3.3.1 液壓螺母的機械結構和工作原理 16
    3.3.2  液壓螺母的性能特點 17
   3.4 齒輪的計算 18
    3.4.1低速級齒輪計算 18
    3.4.2 齒輪材料的熱處理 21
   3.5 軸徑的初步計算 22
    3.5.1 提高軸的強度、剛度和減輕重量的措施 23
第4章  安全校核 25
   4.1 平鍵的安全校核 25
   4.2 滑鍵的強度校核 26
   4.3 齒輪軸的強度校核 26
第5章 三維展示 31
結論 34
參考文獻 36
附錄1 39
附錄2 47
附錄3 53