多功能數字時鐘



①頁數 19

②字?jǐn)?shù) 6932

③摘要

摘 要：

隨著電子技術的發展，在諸如計時、控制等領域，設計出應用具有時間設置（小時和分鐘），鬧鐘時間設置，鬧鐘開、關功能的多功能數字鐘具有十分重要的意義。數字鐘有顯示小時、分鐘，有AM、PM指示器，鬧鐘就緒燈，蜂鳴器等。能實現鍵盤控制切換現場環境溫度顯示（0～60℃ 1℃），切換電網頻率、電壓顯示，電壓欠壓、過壓報警（～220V 10％），非接觸止鬧等功能。該多功能數字鐘具有顯示年、月、日、星期、時、分、秒、溫度及對各日期信息的調整功能；每天三點定時鬧鐘、日期提醒、鬧鈴音樂選擇、掉電保護控制功能，此外除通過干電池供電外，還能通過MP3變壓由USB線直接可用220V交流供電。主要采用STC89C52作為主控芯片，由DS1302產生時鐘信號，由DS18B20溫度傳感器采集溫度信號，并在LCD上顯示時間、溫度等信息，測溫精度可達0.1度，整個時鐘通過菜單的形式實現各個功能，界面友好、直觀，易于操作。

Abstract:

With the development of electronic technology, such as timing, control and other areas, design application with the time setting (hours and minutes), alarm clock time setting, alarm clock, off the multi-functional digital clock is of great significance. Digital clock showing hours, minutes, with AM, PM indicator, alarm clock ready lights, buzzer and so on. To achieve control over the keyboard to switch the site displays the ambient temperature (0 ~ 60 ℃ 1 ℃), switching power grid frequency, voltage display, voltage, undervoltage, overvoltage alarm (~ 220V 10%), non-contact only the downtown and other functions. The multi-functional digital clock with a display year, month, day, week, hours, minutes, seconds, temperature and date information on the adjustment of the various functions; 3:00 regular daily alarm, date reminder, alarm music selection, power-down protection control function, in addition to, inter alia through the dry battery power supply, but also through the USB cable directly to MP3 transformer is available from the 220V AC power. STC89C52 used mainly as a master chip, the clock signal generated by the DS1302 from the temperature sensor DS18B20 collecting temperature signal, and the LCD displays time, temperature and other information, temperature measurement accuracy of up to 0.1 degrees, the entire clock is achieved through the menu in the form of various functional friendly interface, intuitive, easy to operate.

④目錄

目 錄

緒論 1

1設計要求與方案論證 2

1.1設計要求 2

1.1.1基本要求 2

1.1.2發揮部分 2

1.2系統基本方案選擇和論證 2

1.2.1芯片的選擇 2

1.2.2顯示模塊選擇方案和論證 2

1.2.3時鐘信號的選擇方案和論證 2

1.2.4測溫元件的選擇方案與論證 2

1.3 電路設計最終方案決定 3

2系統的硬件設計與實現 3

2.1 電路設計框圖 3

2.2 系統硬件概述 3

2.3 硬件電路結構的設計 3

2.3.1 單片機主控模塊的設計 3

2.3.2時鐘電路模塊的設計 4

2.3.3溫度采集模塊設計 4

2.3.4 顯示模塊的設計 5

2.4電路原理及說明 5

2.4.1 時鐘芯片DS1302的原理： 5

2.4.2溫度傳感器18B20的測溫原理： 7

3系統的軟件設計 7

4 功能的調試 8

4.1硬件調試 8

4.2軟件調試 8

5指標測試 9

5.1 測試儀器 9

5.2掉電保護時間測試 9

5.3溫度測試 9

6測試結果分析與結論 9

6.1 測試結果分析 9

6.2作品功能測試總結 9

附錄 12

附錄一、系統電路圖 12

附錄二、程序清單 13





⑤關鍵字

電子時鐘，多功能，顯示，DS18B20，DS1302

electronic clock; multi-function; show; DS18B20; DS1302



⑥參考文獻

[1] 何立民.《單片機中級教程——原理與應用》.北京航空航天大學出版社.2006

[2] 周潤景等.《基于PROTEUDS的電路及單片機系統設計與仿真》.北京航空航天大學出版社.2006

[3] 趙亮等.《單片機C語言編程與實例》.人民郵電出版社.2003

[4] 沙占友等.《單片機外圍電路設計》.電子工業出版社.2003

[5] 張齊等.《單片機應用系統設計技術》.電子工業出版社.2004