農業大棚溫濕度監控系統監控系統設計

摘   要

大棚技術在全國各個鄉鎮已經普及了，但是隨著這些溫室大棚的數量不斷增加，對于大棚內的溫度、濕度、光照強度和二氧化碳濃度的控制顯得極其重要，特別是溫濕度的監控。本課題設計了基于單片機的農業大棚溫濕度監控系統，更好的對各個農業大棚內各個環境因素進行監控。

 本系統由三部分組成：第一部分的功能是在農業大棚中負責監控溫室，主要是有單片機讀取溫濕度傳感器DT11測得的溫濕度，并且在數碼管顯示。第二部分功能是負責將所測得的溫濕度從農業大棚傳到管理員的電腦或其他通訊設備上，這樣可以讓管理員及時準確的查看大棚內的溫濕度，這部分主要是有485通訊總線完成傳輸。第三部分的功能則是上位機處理接收的溫濕度值，并且判斷這些溫濕度值是否在合理的溫濕度范圍內，如果超出預設值就立即報警。

 通過多次測試表明，系統各個部分功能正常，相互銜接良好，操作簡單方便，大大提高了溫室大棚的科學管理水平，可以減少勞動者的工作量，減少支出，提高大棚內產品的產量，增加勞動者的收入，提高國民生產值，具有很好的發展未來。

關鍵詞：?jiǎn)纹瑱C(jī)、溫室大棚、溫濕度監控、485通訊總線、DHT11

         

ABSTRACT

Greenhouse technology in various villages and towns has spread across the country, but with the growing number of greenhouses, for inside the greenhouse temperature, humidity, light intensity and co2 concentration control is extremely important, especially the temperature and humidity monitoring. This topic design agricultural greenhouse temperature and humidity monitoring system based on single chip microcomputer, the better to monitor various environmental factors within the agricultural greenhouses. 

This system consists of three parts: the first part of the function is responsible for monitoring the greenhouse in agricultural greenhouses, mainly have a microcontroller reads DT11 measured temperature and humidity, temperature and humidity sensor and the digital tube display. Function in the second part is responsible for the temperature and humidity will be faster from agriculture canopy to the administrator of the computer or other communications equipment, so that the administrator timely and accurately check the temperature and humidity inside the greenhouse, this part mainly through 485 communication bus transmission. The third part is the function of upper machine processing receive values of temperature and humidity, and judge whether the temperature and humidity value in a reasonable range of temperature and humidity, if more than the default value is immediately report to the police. 

Through many tests show that system has the function of each part is normal, each other is good, simple and convenient operation, greatly improve the scientific management level of the greenhouses, can reduce the workload of laborer, reduce expenditure, increase in the greenhouse production of products, increase the income of workers, improve the national production, has the very good development future.

Key words: single chip microcomputer, greenhouses, monitor, 485 communication bus, DHT11 temperature and humidity

目錄 

摘   要 I

ABSTRACT II

第一章 緒論 1

1.1 農業大棚的特性 1

1.2 農業大棚溫濕度監控技術的發展歷程 2

1.3 農業大棚監控系統的構成 2

1.3.1 溫度和濕度的測量 2

1.3.2 測量數據的傳輸 2

1.3.3 數據的集中顯示和處理 3

第二章 微機控制的大棚監控系統概況 4

2.1系統功能與結構框圖 4

2.2系統工作過程分析 5

第三章 系統的硬件設計 6

3.1 單片機簡介和應用 6

3.2 DHT11的原理 7

3.2.1、傳感器的信息 7

3.2.2、傳感器性能說明 7

3.2.3、 接口說明 8

3.2.4、 電源引腳 8

3.3各種標準串行通信接口 8

3.3.1 RS-232的原理 8

3.3.2 RS-485的特點 9

3.3.3 RS-485的電壓和電流的要求 9

3.3.4 RS-485的連接 9

3.3.5 系統串行接口標準選擇 10

3.3.6 MAX1480的簡介 11

3.4 LED數碼管顯示原理 11

第四章  系統的軟件設計 14

4.1 上位機軟件設計 14

4.2 下位機程序設計 16

4.2.1 主程序 16

4.2.2 DHT11的相關程序 18

4.2.3串行通信程序 21

第五章 系統調試 24

5.1 硬件調試 24

結  論 27

參考文獻 28

致  謝 29