基于單片機的數字萬用表設計.doc
約45頁DOC格式手機打開展開
基于單片機的數字萬用表設計,44頁，1.5萬字本次設計用單片機芯片at89s52設計一個數字萬用表，能夠測量交、直流電壓值、直流電流、直流電阻以及電容，四位數碼顯示。此系統由分流電阻、分壓電阻、基準電阻、電容測試芯片電路、51單片機最小系統、顯示部分、報警部分、ad轉換和控制部分組成。為使系統更加穩定，使系統整體精度得以...
內容介紹
此文檔由會員 yaohui421 發布
基于單片機的數字萬用表設計
44頁，1.5萬字
本次設計用單片機芯片AT89s52設計一個數字萬用表，能夠測量交、直流電壓值、直流電流、直流電阻以及電容，四位數碼顯示。此系統由分流電阻、分壓電阻、基準電阻、電容測試芯片電路、51單片機最小系統、顯示部分、報警部分、AD轉換和控制部分組成。為使系統更加穩定，使系統整體精度得以保障，本電路使用了AD0809數據轉換芯片，單片機系統設計采用AT89S52單片機作為主控芯片，配以RC上電復位電路和11.0592MHZ震蕩電路，顯示芯片用TEC6122，驅動8位數碼管顯示。程序每執行周期耗時縮到最短，這樣保證了系統的實時性。
關鍵詞 數字萬用表 AT89S52單片機 AD轉換與控制
This design is design a digital universal meter with chip AT89s52 of one-chip computer, can measure and hand in , direct current pressing value , direct current flow , the direct current is hindered, four numbers show. This system is shunted resistance, resistance of partial pressure, basic resistance, minimum system of 51 one-chip computers, shown that some , warning part , AD change and control making up partly. In order to make the system more steady, make the whole precision of the system be ensured, this circuit has used AD0809 data to change the chip, the one-chip computer system is designed to adopt AT89S52 one-chip computer as the top management chip, the electricity is restored to the throne the circuit and 11.0592MHZ and shaken the circuit to match on RC, show that the chip uses TEC6122, urge 8 numbers to be in charge of showing. The every execution cycle consuming time of procedure contracts to get shortest, in this way the real-time character of the security system.
目 錄
摘 要 i
Abstract ii
緒 論 5
1. 數字萬用表設計背景 7
1.1數字萬用表的設計目的和意義 7
1.2 數字萬用表的設計依據 7
1.3數字萬用表設計重點解決的問題 7
2 數字萬用表總體設計方案 7
2.1數字萬用表的基本原理 7
2.2 數字萬用表的硬件系統設計總體框架圖 13
2.3硬件電路設計方案及選用芯片介紹 14
2.3.1 設計方案 14
2.3.2 芯片選擇及功能簡介 14
2.4數字萬用表的硬件設計 25
2.4.1分模塊詳述系統各部分的實現方法 25
2.4.2 數字萬用表控制硬件整體結構圖 30
2.4.3 電路的工作過程描述 30
3. 系統軟件與流程圖 32
3.1 電路功能模塊 32
3.2系統總流程圖 32
3.3物理量采集處理流程 34
3.4電壓測量過程流程圖 34
3.5電流的測量過程流程圖 36
3.6電阻的測量過程流程圖 37
3.7電容測量過程流程圖 39
結 論 40
致 謝 41
參考文獻 42
44頁，1.5萬字
本次設計用單片機芯片AT89s52設計一個數字萬用表，能夠測量交、直流電壓值、直流電流、直流電阻以及電容，四位數碼顯示。此系統由分流電阻、分壓電阻、基準電阻、電容測試芯片電路、51單片機最小系統、顯示部分、報警部分、AD轉換和控制部分組成。為使系統更加穩定，使系統整體精度得以保障，本電路使用了AD0809數據轉換芯片，單片機系統設計采用AT89S52單片機作為主控芯片，配以RC上電復位電路和11.0592MHZ震蕩電路，顯示芯片用TEC6122，驅動8位數碼管顯示。程序每執行周期耗時縮到最短，這樣保證了系統的實時性。
關鍵詞 數字萬用表 AT89S52單片機 AD轉換與控制
This design is design a digital universal meter with chip AT89s52 of one-chip computer, can measure and hand in , direct current pressing value , direct current flow , the direct current is hindered, four numbers show. This system is shunted resistance, resistance of partial pressure, basic resistance, minimum system of 51 one-chip computers, shown that some , warning part , AD change and control making up partly. In order to make the system more steady, make the whole precision of the system be ensured, this circuit has used AD0809 data to change the chip, the one-chip computer system is designed to adopt AT89S52 one-chip computer as the top management chip, the electricity is restored to the throne the circuit and 11.0592MHZ and shaken the circuit to match on RC, show that the chip uses TEC6122, urge 8 numbers to be in charge of showing. The every execution cycle consuming time of procedure contracts to get shortest, in this way the real-time character of the security system.
目 錄
摘 要 i
Abstract ii
緒 論 5
1. 數字萬用表設計背景 7
1.1數字萬用表的設計目的和意義 7
1.2 數字萬用表的設計依據 7
1.3數字萬用表設計重點解決的問題 7
2 數字萬用表總體設計方案 7
2.1數字萬用表的基本原理 7
2.2 數字萬用表的硬件系統設計總體框架圖 13
2.3硬件電路設計方案及選用芯片介紹 14
2.3.1 設計方案 14
2.3.2 芯片選擇及功能簡介 14
2.4數字萬用表的硬件設計 25
2.4.1分模塊詳述系統各部分的實現方法 25
2.4.2 數字萬用表控制硬件整體結構圖 30
2.4.3 電路的工作過程描述 30
3. 系統軟件與流程圖 32
3.1 電路功能模塊 32
3.2系統總流程圖 32
3.3物理量采集處理流程 34
3.4電壓測量過程流程圖 34
3.5電流的測量過程流程圖 36
3.6電阻的測量過程流程圖 37
3.7電容測量過程流程圖 39
結 論 40
致 謝 41
參考文獻 42
