電器插頭注塑模具設計.doc
約21頁DOC格式手機打開展開
電器插頭注塑模具設計,11000字21頁摘要本次畢業設計的任務是塑件注塑模的cad設計。具體是運用pro/e軟件進行電器插頭的注塑模具設計。本文首先對設計對象電器插頭的結構、性能和工藝要求進行分析，以此來確定塑件的材料。然后對塑件結構進行具體的工藝性分析，確定分型面、型腔布置和澆注系統等，選擇合適的注塑機。再進行型腔，型...
內容介紹
此文檔由會員 moshengren 發布
電器插頭注塑模具設計
11000字 21頁
摘 要
本次畢業設計的任務是塑件注塑模的CAD設計。具體是運用PRO/E軟件進行電器插頭的注塑模具設計。本文首先對設計對象電器插頭的結構、性能和工藝要求進行分析，以此來確定塑件的材料。然后對塑件結構進行具體的工藝性分析，確定分型面、型腔布置和澆注系統等，選擇合適的注塑機。再進行型腔，型芯等的尺寸計算，得出大部分的設計尺寸后，用PRO/E軟件開始進行模具的3D建模，設計好模具的模仁部分后利用 PRO/E模座專家EMX4.1來加載模架。同時計算更細節的尺寸，設計模具的各個結構件。整個模具的3D模型建立好之后，用PRO/E將3D模型導成平面的裝配圖和零件圖，再用AUTOCAD軟件對裝配圖和零件圖進行完善修改，最后出圖。
關鍵詞：電器插頭，注塑模具，PRO/E，EMX
ABSTRACT
The graduation project task is plastic injection mold CAD design. Specifically the use of PRO / E software for electrical plug injection mold design. Firstly, the structure, performance and process requirements design objects electrical plugs were analyzed in order to determine the material of the plastic parts. Then the plastic structure of the specific process of analysis to determine the parting surface, cavity layout and pouring system, select the appropriate injection molding machine. Then the cavity, such as the size of the core calculation, after most of the design dimensions come, Using PRO / E 3D modeling software to begin the mold, Good design of the mold after mold insert part of the use of PRO / E mold base mold expert EMX4.1 to load. Also calculated the size of each structure design of the mold more detail. After the 3D model of the entire mold is set up, Using PRO / E 3D model will lead to a planar assembly drawings and part drawings, AUTOCAD software reuse assembly drawings and part drawings revised and improved, the final plot.
Keywords:Electrical plugs，Injection mold，PRO/E，EMX.
目 錄
摘 要 1
ABSTRACT 1
第一章 前言 3
1.1 注塑模具綜述 3
1.2 注塑模具的地位 3
1.3 我國注塑模具的現狀 3
1.4注塑模具的發展趨勢 3
第二章 塑件的分析 4
2.1外形的尺寸 4
2.2塑件的材料分析 4
第三章 注塑機選擇 6
3.1初步選定注射機 7
3.2注射機的校核 7
第四章 模具結構件的設計 7
4.1分型面的選擇 7
4.2成型零件凹凸模的結構設計 8
4.3成型零件的尺寸計算 9
4.4澆注系統的設計 10
4.5 模架的加載 11
4.6冷卻系統的設計 13
4.7推出機構的設計 13
4.8排氣系統的設計 14
第五章 結論與心得 14
參考文獻 16
致 謝 16
11000字 21頁
摘 要
本次畢業設計的任務是塑件注塑模的CAD設計。具體是運用PRO/E軟件進行電器插頭的注塑模具設計。本文首先對設計對象電器插頭的結構、性能和工藝要求進行分析，以此來確定塑件的材料。然后對塑件結構進行具體的工藝性分析，確定分型面、型腔布置和澆注系統等，選擇合適的注塑機。再進行型腔，型芯等的尺寸計算，得出大部分的設計尺寸后，用PRO/E軟件開始進行模具的3D建模，設計好模具的模仁部分后利用 PRO/E模座專家EMX4.1來加載模架。同時計算更細節的尺寸，設計模具的各個結構件。整個模具的3D模型建立好之后，用PRO/E將3D模型導成平面的裝配圖和零件圖，再用AUTOCAD軟件對裝配圖和零件圖進行完善修改，最后出圖。
關鍵詞：電器插頭，注塑模具，PRO/E，EMX
ABSTRACT
The graduation project task is plastic injection mold CAD design. Specifically the use of PRO / E software for electrical plug injection mold design. Firstly, the structure, performance and process requirements design objects electrical plugs were analyzed in order to determine the material of the plastic parts. Then the plastic structure of the specific process of analysis to determine the parting surface, cavity layout and pouring system, select the appropriate injection molding machine. Then the cavity, such as the size of the core calculation, after most of the design dimensions come, Using PRO / E 3D modeling software to begin the mold, Good design of the mold after mold insert part of the use of PRO / E mold base mold expert EMX4.1 to load. Also calculated the size of each structure design of the mold more detail. After the 3D model of the entire mold is set up, Using PRO / E 3D model will lead to a planar assembly drawings and part drawings, AUTOCAD software reuse assembly drawings and part drawings revised and improved, the final plot.
Keywords:Electrical plugs，Injection mold，PRO/E，EMX.
目 錄
摘 要 1
ABSTRACT 1
第一章 前言 3
1.1 注塑模具綜述 3
1.2 注塑模具的地位 3
1.3 我國注塑模具的現狀 3
1.4注塑模具的發展趨勢 3
第二章 塑件的分析 4
2.1外形的尺寸 4
2.2塑件的材料分析 4
第三章 注塑機選擇 6
3.1初步選定注射機 7
3.2注射機的校核 7
第四章 模具結構件的設計 7
4.1分型面的選擇 7
4.2成型零件凹凸模的結構設計 8
4.3成型零件的尺寸計算 9
4.4澆注系統的設計 10
4.5 模架的加載 11
4.6冷卻系統的設計 13
4.7推出機構的設計 13
4.8排氣系統的設計 14
第五章 結論與心得 14
參考文獻 16
致 謝 16
