混合機主機及關鍵部件設計
Design and Key Components of the Mixer Host

25800字 62頁

本人自己的畢業設計作品，確保原創，放心使用！


摘要
混合機是飼料加工中的最關鍵設備之一，目前對混合機雖然已有一定實驗與理論研究，但是仍然存在兩個關鍵問題:一是對常用的臥式螺帶混合機的研究較少，二是絕大多數臥式螺帶混合機均存在混合死角、混合均勻度偏低等問題，使得研發的產品性能往往達不到用戶要求。為此，本設計提出了一種新型逆向雙螺帶混合機構，該機構能很好的解決以上問題，使混合機的混合強度和生產效率均得到顯著提高。
本設計主要研究?jī)?nèi)容及其創新性工作如下：
1、針對現有的螺帶式混合機械存在的攪拌強度不足、生產效率不高等問題，根據混合攪拌原理，創新性地設計了一種新型逆向雙螺帶混合機。
2、針對現有螺帶混合機攪拌葉片磨損過快的問題，選用Ti3C2/Cu-Al金屬陶瓷材料及其快速成形技術加以解決。
3、利用Pro-E軟件模擬了傳統單螺帶、雙螺帶以及新型逆向雙螺帶對單一粉體以及多種粉體的混合效果，提出了當量混合均勻度（DHD）這一新的表征參數，由此改變了虛擬樣機混合效果只能定性評價的現狀，從而為新型混合機的優化設計提供了可靠依據。
4、通過Pro-E軟件的模擬試驗，結果表明，新型逆向雙螺帶的當量混合均勻度分別是傳統單螺帶、傳統雙螺帶的2倍和1.5倍。從而，從結構上較好的解決了現有螺帶式混合機械的存在問題。
關鍵詞：飼料，混合機，新型逆向雙螺帶，混合均勻度，模擬試驗




New type of feed horizontal double spiral belt mixing machine design and research
Abstract
Mixed feed processing machine is the one of the most critical equipment, although it has already certain theoretical and experimental research on the mixing machine, there are still existing two issues: one of the commonly used horizontal spiral belt mixing machine research limited, two is the vast majority of horizontal spiral belt mixing machine mixing dead angle, there are mixed degree of uniformity of low status question, products hardly meeting users’ requirements. To this end, the design under the support of the National Natural Foundation of China (31172243)  and  the  Ministry of Education ,Fund for the Doctoral Project (20103227110007). Therefore, this paper puts forward a novel reverse double spiral belt mixing mechanism, the body can be very good to solve the above problem, to improve mixing intensity and efficiency of the mixing machine greatly.
The design of the main research contents and innovative work as follows:
1. In view of the existing screw belt mixer in mixing strength is insufficient, the production efficiency is not advanced problem, based on the mixing principle, innovative design of a new type of reverse double spiral belt mixing machine.
2. In view of the existing spiral belt mixing machine mixing blade wear problem of fast, selection of Ti3C2/Cu-Al metal ceramic material and rapid prototyping technology to solve.
3. Pro-E software was used to simulate the mixing effect of the traditional single screw, double ribbon and novel reverse double ribbon on a single powder and a variety of powder, it put forward the equivalent homogeneity of this new characterization parameter, to change the virtual prototype hybrid effect only stay a qualitative eva luation of the status, novel hybrid machine so as to provide the reliable basis for the optimization design.
4. Through the Pro-E software simulation test, the results show that the equivalent mixing uniformity of novel reverse double ribbon are traditional single screw, the traditional double ribbon 2 times and 1.5 times. Thus, to solves the problem of the structure in the existing screw belt type mixing machinery problems.
Key words: Feed; Mixing machine; Novel reverse double ribbon; Mixing uniformity; simulation test


目錄
第一章 緒論 1
1.1 研究的目的及意義 1
1.1.1我國生豬養殖業現狀 1
1.1.2 我國生豬飼喂技術現狀 1
1.1.3生豬全混合日糧（TMR）飼養技術 2
1.1.4 本設計的研究意義 2
1.1.5 粉體混合機械主要混合原理分析 3
1.2飼料混合機的國內外研究現狀 4
1.2.1 國內研究現狀 4
1.2.2 國外研究現狀 5
1.3本設計的主要研究?jī)?nèi)容 6
1.4 本章小結 7
第二章 新型飼料臥式雙螺帶混合機總體方案設計 8
2.1 新型飼料臥式雙螺帶混合機的功能需求分析 8
2.2 新型飼料臥式雙螺帶混合機構總體方案設計 10
2.3 三種螺帶形式的混合原理及其分析 10
2.3.1單螺帶的混合原理及其分析 10
2.3.2傳統雙螺帶混合原理及其分析 11
2.3.3新型逆向雙螺帶混合原理及其分析 13
2.3.4三種螺帶形式的混合作用比較 14
2.4新型逆向雙螺帶混合機總體方案設計 15
2.4.1新型逆向雙螺帶混合機外廓尺寸的確定 16
2.4.2新型逆向雙螺帶混合機動力傳動方案選擇 18
2.5本章小結 18
第三章 攪拌葉片、攪拌軸等主要部件的優化設計和計算 19
3.1新型逆向雙螺帶混合機功率及執行部分功率計算 19
3.1.1螺帶攪拌葉片的優化設計 20
3.1.2攪拌軸設計 23
3.1.3支撐桿的設計及計算 26
3.2 新型逆向雙螺帶的材料選擇及其成形工藝 26
3.2.1傳統混合機螺帶的磨損問題 26
3.2.2 新型逆向雙螺帶混合機攪拌螺帶的材料選擇及其成形工藝 27
3.3聯軸器、減速器等傳動部件的設計和計算 28
3.4原動部分設計和計算 31
3.5進出料口、底座及軸承的設..