国产精品婷婷久久久久久,国产精品美女久久久浪潮av,草草国产,人妻精品久久无码专区精东影业

6dm系列空壓機的可靠性提升.doc

  
約47頁DOC格式手機打開展開

6dm系列空壓機的可靠性提升,6dm系列空壓機的可靠性提升15200字48頁摘要:介紹了柴油機用空壓機的結構、性能及工作原理;分析了空壓機在市場上的故障現況,并且針對空壓機的竄油故障進行深入研究,提出初步的改進方案;改進方案主要是從空壓機氣缸體材料、氣缸體內表面網紋參數、活塞及活塞環的配合、進氣壓力和排氣溫度這幾個方面入手。經過大量的實驗驗證方案的...
編號:99-480455大小:3.71M
分類: 論文>機械工業論文

內容介紹

此文檔由會員 moshengren 發布

6DM系列空壓機的可靠性提升

15200字 48頁

摘要:介紹了柴油機用空壓機的結構、性能及工作原理;分析了空壓機在市場上的故障現況,并且針對空壓機的竄油故障進行深入研究,提出初步的改進方案;改進方案主要是從空壓機氣缸體材料、氣缸體內表面網紋參數、活塞及活塞環的配合、進氣壓力和排氣溫度這幾個方面入手。經過大量的實驗驗證方案的可行性,并最終從實驗數據和結果中得出結論。
關鍵詞:柴油機 空壓機 竄油 進氣負壓




The improvement of the reliability of 6DM air compressor
Xu shaojun
Abstract:This paper introduces the structure, performance and operational principle of air compressor of diesel engine; it analyses the fault status in the market of air compressor, studies the oil carry-over of air compressor deeply, and the improved scheme is put forward preliminarily. The improved schemes are advanced mainly from the material of air compressor cylinder body, surface texture parameters of cylinder body, the joint of piston and piston rings, the inlet pressure and temperature. After the experiments, validating the feasibility of schemes, and finally drawing the conclusion from the experiment data and result.

Key words:diesel engine,air compressor,oil carry-over,subpressure



目錄
第一章 緒論 5
1.1 前言 5
1.2 畢業設計的目的 5
1.3 課題研究背景與意義 5
第二章 空壓機簡介 6
2.1 空壓機的功能 6
2.2 空壓機的基本型式 6
2.3 空壓機的國內使用現狀 6
2.4 機械式空壓機的結構及工作原理 6
2.5 術語 7
第三章 空壓機的故障分析及改進措施 10
3.1 空壓機的基本故障模式及分析 10
3.1.1 空壓機竄油量大 10
3.1.2 空壓機泵氣慢或不充氣 11
3.1.3 空壓機漏油和漏水故障 12
3.2 空壓機故障的改進措施 12
第四章 實驗過程與結果分析 14
4.1 氣缸體材料耐磨性實驗 14
4.1.1 實驗內容 14
4.1.2 實驗結果分析與結論 16
4.2 氣缸體網紋參數的改進實驗 17
4.2.1 珩磨的原理 17
4.2.2 實驗內容 18
4.2.3 實驗結果分析與結論 21
4.3 活塞和活塞環的設計改進實驗 22
4.3.1 實驗內容 22
4.3.2 實驗結果分析與結論 25
4.4 活塞、活塞環的設計改進(后續改進實驗) 25
4.4.1 實驗內容 25
4.4.2 實驗結果分析與結論 37
4.5 進氣負壓對空壓泵竄機油影響的研究 37
4.5.1 實驗內容 37
4.5.2 實驗結果分析與結論 40
4.6 降低排氣溫度的研究實驗 40
4.6.1 實驗內容 40
4.6.2 實驗結果分析與結論 42
第五章 結論 43
參考文獻 46
致謝 47