国产精品婷婷久久久久久,国产精品美女久久久浪潮av,草草国产,人妻精品久久无码专区精东影业

聚合物氧化石墨烯納米復合材料燃燒性能研究.doc

  
約86頁DOC格式手機打開展開

聚合物氧化石墨烯納米復合材料燃燒性能研究,聚合物/氧化石墨烯納米復合材料燃燒性能研究 包括讀書報告,外文翻譯譯文自己原創的畢業論文,已經通過校內系統檢測,重復率低,僅在本站獨家出售,大家放心下載使用摘要氧化石墨烯是近幾年來發展起來的一種新型二維無機納米材料,自從其發現以來,氧化石墨烯在化學、物理、材料、電子等各個領域顯示了廣闊的應用前景。尤其是它們極高的機械強...
編號:106-480582大小:4.69M
分類: 論文>材料科學論文

內容介紹

此文檔由會員 小花仙66 發布

聚合物/氧化石墨烯納米復合材料燃燒性能研究

包括讀書報告,外文翻譯譯文
自己原創的畢業論文,已經通過校內系統檢測,重復率低,僅在本站獨家出售,大家放心下載使用

摘要
氧化石墨烯是近幾年來發展起來的一種新型二維無機納米材料,自從其發現以來,氧化石墨烯在化學、物理、材料、電子等各個領域顯示了廣闊的應用前景。尤其是它們極高的機械強度、出色的導電和導熱性能,以及豐富的原料來源,使其能作為一種理想的無機納米填料來制備聚合物復合材料。但是目前為止,氧化石墨烯材料的大規模制備并應用于火災安全方面,以及如何將氧化石墨烯均勻地分散到聚合物基體中并且優化氧化石墨烯與聚合物基體之間的界面作用力一直是科學界及工業界尚待解決的難題。本學位論文圍繞著這些問題進行了一系列研究。具體研究內容及結果如下:
1、采用改進的Hummers法制備氧化石墨烯;
2、采用浸滯、包裹和烘干等步驟制備氧化石墨烯包裹海綿納米復合材料,并研究其阻燃性能。
2、采用共混法制備PP/氧化石墨烯納米物復合材料,并研究其阻燃性能。
實驗結果表明,采用改進的Hummers法制備了石墨烯片層堆積厚度約為5-6nm,為5-6層的石墨烯。燃燒實驗結果表明,隨著包裹海綿的氧化石墨烯濃度的提升,其阻燃性能改善越明顯。當采用0.003g/mL對海綿進行浸泡包裹得到的石墨烯包裹海綿納米復合材料在阻燃方面得到明顯提高,但當濃度高于0.003g/mL后,對海綿的阻燃性能影響較小。另外,對PP/氧化石墨烯聚合物復合材料的垂直燃燒測試和極限氧指數測試都發現,氧化石墨烯的引入對其阻燃性能的提高具有促進作用。

關鍵詞:氧化石墨烯;海綿;包裹;納米復合材料;阻燃性能


ABSTRACT
Graphene oxide is novel two-dimensional inorganic nano-materials developed recently, it has great promise applications in the fields of chemistry, physics, material science, electronics, and so on, since its first successful fabrication. Graphene oxide is ideal inorganic nanofillers for reinforcement of polymer composite materials because of its ultrahigh mechanical property, excellent electrical and thermal conductivity, and abundant resources (graphite). However, they are still obstacles to be resolved in both academia and industry, including the mass preparation of graphene oxide, the applications into fire safety and the homogeneous incorporation of graphene oxide into polymer matrix and optimizing the interfacial interactions between them. With the aim of addressing these problems, numerous researches have been done in this thesis. The details of research are listed as follows:
1. Graphene oxide was prepared by a modified Hummers method.
2. Graphene oxide coating sponges nanocomposites were preparated by immersion, coating and drying processes, and their flame retardant properties were investigated.
3. GO/PP nanocomposites were prepared by melt blending method, and their fire retardant properties were studied.
From the results, the average stacking height of sheet Lc (the crystalline thickness of the (002) facet), was estimated to be ~5-6 nm, corresponding to no more than 5-6 graphene layers. The experiment results of combustion show that the fire retardant properties were improve obviously with increasing concentration of graphene oxide. When the concentration of graphene oxide was 0.003 g/mL, the fire retardant properties of graphene oxide coating sponge nanocomposites were increased remarkably. However, when the concentration reaches to a specific level, the effect of graphene oxide could be neglected for the combustion properties. In addition, the GO plays a positive role in the enhancement of the fire retardant properties of PP /GO nanocomposites from both UL-94 and LOI.

KEYWORDS: graphene oxide; sponges; coating; nanocomposites; fire retardant properties


目 錄
摘要 v
ABSTRACT vi
縮略詞對照表 vii
第一章 緒論 1
1.1 引言 1
1.2 無鹵阻燃技術的現狀和研究進展 1
1.2.1 傳統膨脹阻燃體系 2
1.2.2 新型膨脹阻燃體系 3
1.2.3 協同阻燃技術 4
1.2.4 微膠囊化阻燃技術 6
1.2.5 納米復合阻燃技術 7
1.3 氧化石墨烯的制備及聚合物/氧化石墨烯納米復合材料阻燃性能研究 9
1.3.1 氧化石墨烯的制備方法 10
1.3.2 氧化石墨烯的結構 11
1.3.3 氧化石墨烯的性質 12
1.3.4 氧化石墨烯聚合物納米復合材料的制備方法 13
1.3.5 聚合物阻燃性能和阻燃機理研究 14
1.4 研究目標及意義 16
1.5 研究思路與研究內容 17
1.5.1 研究思路 17
1.5.2 研究內容 17
第二章 氧化石墨烯及其聚合物納米復合材料的制備與阻燃性能測試 19
2.1 引言 19
2.2 實驗中所用藥品和儀器 19
2.3實驗操作步驟及過程 21
2.3.1 氧化石墨烯的制備 21
2.3.2 氧化石墨烯的剝離 24
2.3.3 氧化石墨烯包裹海綿納米復合材料的制備和燃燒實驗 25
2.3.4 PP/氧化石墨烯納米復合材料的制備及燃燒性能測試 26
2.4 氧化石墨烯表征及其復合材料阻燃性能測試方法 28
2.4.1掃描電鏡(SEM)形貌觀察 28
2.4.2 X-射線衍射分析 28
2.4.3透射電鏡(TEM)形貌觀察 29
2.4.4拉曼光譜儀測試 29
2.4.5極限氧指數測試(LOI) 29
2.4.6垂直燃燒測試(UL-94) 29
第三章 氧化石墨烯及其聚合物納米復合材料阻燃性能研究 31
3.1氧化石墨烯的表征 31
3.1.1 石墨、氧化石墨烯的XRD測試結果 31
3.1.2石墨、氧化石墨烯的拉曼圖譜結果和分析 32
3.1.3氧化石墨烯的掃描電鏡照片分析 34
3.1.4氧化石墨烯洗滌前后透射電鏡照片分析 34
3.2氧化石墨烯包裹海綿納米復合材料..