框架結構教學樓畢業設計計算書


目     錄 
摘  要 3
緒論 5
1 建筑設計理念及設計依據 6
1.1 設計理念 6
1.2 工程概況 6
1.3設計依據 7
2 建筑設計 8
2.1 平面設計 8
2.2 立面設計 9
2.3 建筑剖面設計 10
2.4 其它部分詳細做法和說明 10
3 截面尺寸初步估計 12
3.1柱截面設計 12
3.2梁的截面設計 12
4 框架側移剛度的計算 13
4.1 橫梁線剛度I B的計算 13
4.2 柱線剛度I C的計算 14
4.3各層橫向側移剛度計算 14
5 豎向荷載及其內力計算 16
5.1計算單元的選擇確定 16
5.2豎向荷載統計 16
5.3豎向荷載內力計算 18
5.2 重力荷載代表值計算及荷載匯總 29
6 水平荷載計算 32
6.1風荷載計算 32
6.2 地震荷載計算 35
7框架的內力組合 40
7.1 梁柱的內力組合 40
7.2 柱端彎矩設計值的調整 45
8 截面設計 46
8.1框架梁截面設計 46
8.2框架柱截面設計 48
8.3 樓板設計 54
9 樓梯計算 57
9.1 示意圖 57
9.2 荷載計算 57
10 基礎設計 59
10.1荷載設計值 59
10.2 A、D柱獨立基礎的計算 59
10.3 B、C柱基礎配筋 62
畢業設計總結 65
致謝 69
 
 

摘  要
根據教學樓設計規范和其它相關標準，以及設計要求和提供的地質資料，設計該框架結構教學樓。 按照先建筑后結構，先整體布局后局部節點設計步驟設計。主要內容包括：設計資料、建筑設計總說明、建筑的平面、立面、剖面圖設計說明，以及其它部分的設計說明；結構平面布置及計算簡圖確定、荷載計算、內力計算、內力組合、主梁截面設計和配筋計算、框架柱截面設計和配筋計算、次梁截面設計配筋計算、樓板和屋面設計、樓梯設計，基礎設計等。其中附有風荷載作用下的框架彎矩、剪力和軸力圖；縱向和橫向地震荷載作用下的框架彎矩、剪力和軸力圖；恒荷載和活荷載作用下的框架彎矩、剪力和軸力圖以及梁柱的內力組合表。
關鍵詞：框架、重力荷載代表值；現澆鋼筋混凝土結構；內力組合；彎矩調幅。
 

Abstract
According： to building design specifications and other relevant standards and design requirements and provide geological data, the design of the framework of the classroom building. After the first building in accordance with the structure and layout of the overall after the first local node design steps design. Main contents include : design, architectural design of the total shows that the construction of the plane, Facade, profile design specifications, , and other parts of the design; structural layout and schematic calculation of identification, load, stress, the combination of internal forces, Main beam reinforcement design and calculation, frame-section design and reinforcement, meeting beam reinforcement design, floor and roof design, stair design, infrastructure design. Enclosing wind load under the framework moment, shear and axial bid; vertical and horizontal seismic loads under the framework of the moment, shear and axial bid; Constant load and live load under the framework moment, shear and axial trying to internal forces and the combination of beam-column table.
Key Words：frame, Gravity load charecter value , cast-in-place reinforced concrete structure , internal force make up , curved square amplitude modulation.