摘 要

轉向節是汽車底盤上的關鍵零部件。它既支撐車體重量，又傳遞轉向力矩和承受前輪剎車制動力矩。因此對其機械性能和外形結構要求嚴格，制造難度大。隨著計算機軟硬件技術，計算機圖形學等學科的迅猛發展、CAD技術已成為產品設計人員進行研究開發的重要工具，其中的三維造型技術已被制造業廣泛應用于產品及模具設計、方案評審、自動化加工制造及管理維護各個方面。
本次畢業設計以轎車四驅連接軸轉向節為研究對象。根據給定的毛坯圖，對零件的幾何外形和結構進行分析以確定其成形過程中需要的成形方法。然后，以復雜零件的精聾@尚撾傅妓枷耄荼杖費鉤尚衛礪郟岷先燃費辜際?，针对骄暤转向秸屻件的纂E硤氐?，采用骄暤转向秸屻件抵\杖費咕芤徊匠尚畏ǖ墓ひ鍘Ｒ訳G和DEFORMTM軟件為工具，分別進行模具設計和對閉式擠壓工序進行三維有限元分析，得到了成形過程中金屬的流動規律，應力、應變、損傷和溫度的分布情況以及最終的成型情況。
通過這次畢業設計，在鞏固以前所學知識的基礎上，對鍛造技術、模具設計、模具制造及計算機輔助設計和計算機仿真技術等方面的知識有了進一步的深入學習。所設計的模具能夠達到實際使用要求，為該產品的成功開發提供技術保證。

關鍵詞：轉向節；閉塞擠壓；數值模擬；計算機輔助設計


















ABSTRACT

Steering knuckle is one of the most important car key parts and a security
part. It supports the body weight, transfers steering moment and endures
braking moment of front-wheel. So the requirement of its mechanical
characteristic and contour structure is very strict. With the swift and violent development of computer hardware and software, finite element method and computer graphics, the computer aided engineering (CAE) technology based on numerical simulation is widely used in forging forming field.
The part this paper desinged is the four-drive connect axes of steering knuckle on car. According to the two-dimensional drawing model, the geometric shape and structure of the part was analysis to certain the forming method in the forming process of pars. Then, with the guidance of precision forming complex components, basing on the forming theory of obturated-extrusion, combining the technique of hot extrusion, considering the characteristics of steering knuckle, so the one-step precision obturated lateral-bend extrusion forming method are presented. The die is designing and one-step forming method is studied on three-dimensional FEM analysis by UGII and DEFORM. So the metal flow rule and the distributions of strain, stress, velocity and temperature can be obtained, so as to the finally circs of molding.
Through this graduation project, in the consolidation of previous knowledge on the basis of forging technology, tooling design, Die manufacturing and computer-aided design and computer simulation technology, and other aspects of knowledge has been further in-depth study. Die designed to achieve actual use requirements for the successful development of products providing technical assurance.

Key words：Steering knuckle; obturated-extrusion; numerical simulation;
Computer aided design









目 錄
中文摘要 Ⅰ
英文摘要 Ⅱ
1緒論. 1
1.1引言 1
1.2國內外研究現狀 1
1.3 課題目的及內容 2
2成形工藝分析 4
2.1零件成形性分析 4
2.1.1 結構及尺寸分析 4
2.1.2材料分析 6
2.2工藝分析 6
2.2.1 可成形性分析…………………………………………………………………………… 6
2.2.2 一次性閉塞擠壓成形分析…………………………………………………………………7
2.3成型參數對擠壓力的影響…………………………………………………………………… 8
2.3.1 坯料始鍛溫度的影響………………………………………………………………………８
2.3.2 模具預熱溫度的影響………………………………………………………………………８
2.3.3 摩擦條件的影響……………………………………………………………………………９
3閉塞擠壓的基礎理論 10
3.1閉塞擠壓的定義和分類………………………………………………………………………10
3.2閉塞擠壓成型時的變形特點…………………………………………………………………11
3.3閉塞擠壓的特點 13
4轉向節模具設計 15
4.1模具設計軟件UG介紹 15
4.2 鍛件形狀及模具的設計 …………………………………………………………………….. 15
4.3模具裝配圖結構設計………………………………………………………………………… 17
5 數值模擬………………………………………………………………20
5.1模具模擬軟件DEFORM介紹…………………………………………………………………… 20
5.2 剛塑性有限元增量理論的廣義變分原理…………………………………………………… 20
5.2.1 基本假設………………………………………………………………………………… 20
5.2.2 基本方程………………………………………………………………………………….20
5.2.3 剛塑性材料的變分原理………………………………………………………………… 21
5.3 剛塑性有限元求解步驟…………………………………………………………………… 22
5.4 溫度場有限元模型………………………………………………………………………… 23
5.5模擬及分析…………………………………………………………………………………..24
6總結 31
參考文獻 32
致謝 33