軸受板沖壓成型工藝與模具設計(本科畢業論文設計).doc
約29頁DOC格式手機打開展開
軸受板沖壓成型工藝與模具設計(本科畢業論文設計),摘要沖壓生產方式可以大大的提高勞動生產效率,減輕工人負擔,具有重要的技術進步意義和經濟價值,因此在工業生產中應用非常廣泛。隨著技術的發展,工業生產中模具的使用已經越來越引起人們的重視,沖壓模具的自動送料等先進技術也大量投入到實際的生產中。文中簡要概述了沖壓模具和連續模具的特點及目前的發展狀況和趨勢,并介紹了模具設計技術...
![](http://img.queshao.com/images/pcgzh.gif)
![](http://preview.queshao.com/tobuy/94905.gif)
內容介紹
此文檔由會員 genmail 發布
摘要
沖壓生產方式可以大大的提高勞動生產效率,減輕工人負擔,具有重要的技術進步意義和經濟價值,因此在工業生產中應用非常廣泛。隨著技術的發展,工業生產中模具的使用已經越來越引起人們的重視,沖壓模具的自動送料等先進技術也大量投入到實際的生產中。
文中簡要概述了沖壓模具和連續模具的特點及目前的發展狀況和趨勢,并介紹了模具設計技術。對產品進行了詳細的工藝性分析和工藝方案的確定。
根據所提供的軸受板零件圖,分析了沖壓成型的工藝性。通過比較各種工藝的優劣,最終確定了其工藝方案;通過具體計算和設計該方案中的各工序的工藝參數,設計并繪制出所需的模具圖;按照沖壓模具設計的一般步驟,計算并設計了本套模具上的主要零部件,如:凸模、凹模、凸模固定板、凹模固定板、卸料板、檔料銷等。模架采用標準模架,選用了合適的沖壓設備。這樣設計出的連續模具可保證生產運行平穩可靠,從而提高效率。
關鍵詞:沖壓,連續模具,彎曲,沖裁
ABSTRACT
Punching die has been widely used in industrial production. In the traditional industrial production, the worker work very hard, and there are too much work, so the efficiency is low. With the development of the science and technology nowadays, the use of punching die in the industrial production gain more attention, and be used in the industrial production more and more. Self-acting feed technology of punching die is also used in production, punching die could increase the efficiency of production and could alleviate the work burden,so it has significant meaning in technologic progress and economic value.
The papers briefly outlined the stamping die and progressive die current development and trend, moreover, it introduced die design technology. The analysis and identification of the product are done pretty well.
The paper analyses the forming technology, compare all merits, according to the provided shaft pats draft, finalizing its technology program, through special calculation and design of process parameters of program, design and draw up drawing for the mold. Stamping die design in accordance with the general steps to calculate and design the sets on the main mold parts, such as: punch, hollowing block, punch plate, die block, stripper plate, barrier pin etc. The standard model planes and s suitable punch equipment are chosen. Eventually the stamping die is designed to ensure reliable operation to improve the efficiency.
Keywords: punch, the progressive die,bend,blanking
目錄
摘要 I
ABSTRACT II
目錄 III
1 緒論 1
1.1沖壓技術和連續模具的特點及應用 1
1.1.1沖壓技術的特點及應用 1
1.1.2連續模具的特點及應用 1
1.2 模具設計技術 2
1.2.1 CAD 技術 2
1.2.2 CAE 技術 2
1.3課題研究的內容 2
2 沖壓工藝性分析 3
2.1 沖壓工藝性的總體要求 3
2.2 軸受板零件的形狀 4
2.3結構工藝性分析 4
2.4 軸受板所用的材料 4
2.5 工藝方案的確定 5
3主要工藝參數計算 6
3.1 確定排樣方案 6
3.2 確定彎曲毛坯展開尺寸 6
3.3計算各工步壓力 7
3.3.1沖Ф3.1和Ф1.8的孔 7
3.3.2沖不規則多邊形 8
3.3.3彎曲兩個圓環部位 8
3.3.4沖裁剩余部分以及彎曲95°的部分 8
3.4選取壓力機 9
4編寫沖壓工藝卡片 11
4.1編寫沖壓工藝卡片的步驟 11
4.2軸受板沖壓工藝卡片 13
5 模具總體設計 16
5.1沖孔模具設計 16
5.1.1沖孔1的凸凹模工作尺寸確定 16
5.1.2沖孔2的凸凹模尺寸確定 16
5.2不規則多邊形沖裁工作尺寸設計 17
5.3 彎曲兩個圓環的部位 18
5.3.1凸凹模間隙的確定 18
5.3.2 凸凹模寬度尺寸計算 18
5.3.3凸、凹模圓角半徑與彎曲凹模深度的確定 19
5.4 彎曲95°的部分及落料 19
5.4.1彎曲95°的部分凸凹模工作尺寸計算 19
5.4.2落料工作部分尺寸確定 19
5.5模具結構形式的選擇 20
5.6卸料彈簧的選擇 20
5.7模具其它零件的結構尺寸 21
6 總結 24
7致謝 25
參考文獻 26
沖壓生產方式可以大大的提高勞動生產效率,減輕工人負擔,具有重要的技術進步意義和經濟價值,因此在工業生產中應用非常廣泛。隨著技術的發展,工業生產中模具的使用已經越來越引起人們的重視,沖壓模具的自動送料等先進技術也大量投入到實際的生產中。
文中簡要概述了沖壓模具和連續模具的特點及目前的發展狀況和趨勢,并介紹了模具設計技術。對產品進行了詳細的工藝性分析和工藝方案的確定。
根據所提供的軸受板零件圖,分析了沖壓成型的工藝性。通過比較各種工藝的優劣,最終確定了其工藝方案;通過具體計算和設計該方案中的各工序的工藝參數,設計并繪制出所需的模具圖;按照沖壓模具設計的一般步驟,計算并設計了本套模具上的主要零部件,如:凸模、凹模、凸模固定板、凹模固定板、卸料板、檔料銷等。模架采用標準模架,選用了合適的沖壓設備。這樣設計出的連續模具可保證生產運行平穩可靠,從而提高效率。
關鍵詞:沖壓,連續模具,彎曲,沖裁
ABSTRACT
Punching die has been widely used in industrial production. In the traditional industrial production, the worker work very hard, and there are too much work, so the efficiency is low. With the development of the science and technology nowadays, the use of punching die in the industrial production gain more attention, and be used in the industrial production more and more. Self-acting feed technology of punching die is also used in production, punching die could increase the efficiency of production and could alleviate the work burden,so it has significant meaning in technologic progress and economic value.
The papers briefly outlined the stamping die and progressive die current development and trend, moreover, it introduced die design technology. The analysis and identification of the product are done pretty well.
The paper analyses the forming technology, compare all merits, according to the provided shaft pats draft, finalizing its technology program, through special calculation and design of process parameters of program, design and draw up drawing for the mold. Stamping die design in accordance with the general steps to calculate and design the sets on the main mold parts, such as: punch, hollowing block, punch plate, die block, stripper plate, barrier pin etc. The standard model planes and s suitable punch equipment are chosen. Eventually the stamping die is designed to ensure reliable operation to improve the efficiency.
Keywords: punch, the progressive die,bend,blanking
目錄
摘要 I
ABSTRACT II
目錄 III
1 緒論 1
1.1沖壓技術和連續模具的特點及應用 1
1.1.1沖壓技術的特點及應用 1
1.1.2連續模具的特點及應用 1
1.2 模具設計技術 2
1.2.1 CAD 技術 2
1.2.2 CAE 技術 2
1.3課題研究的內容 2
2 沖壓工藝性分析 3
2.1 沖壓工藝性的總體要求 3
2.2 軸受板零件的形狀 4
2.3結構工藝性分析 4
2.4 軸受板所用的材料 4
2.5 工藝方案的確定 5
3主要工藝參數計算 6
3.1 確定排樣方案 6
3.2 確定彎曲毛坯展開尺寸 6
3.3計算各工步壓力 7
3.3.1沖Ф3.1和Ф1.8的孔 7
3.3.2沖不規則多邊形 8
3.3.3彎曲兩個圓環部位 8
3.3.4沖裁剩余部分以及彎曲95°的部分 8
3.4選取壓力機 9
4編寫沖壓工藝卡片 11
4.1編寫沖壓工藝卡片的步驟 11
4.2軸受板沖壓工藝卡片 13
5 模具總體設計 16
5.1沖孔模具設計 16
5.1.1沖孔1的凸凹模工作尺寸確定 16
5.1.2沖孔2的凸凹模尺寸確定 16
5.2不規則多邊形沖裁工作尺寸設計 17
5.3 彎曲兩個圓環的部位 18
5.3.1凸凹模間隙的確定 18
5.3.2 凸凹模寬度尺寸計算 18
5.3.3凸、凹模圓角半徑與彎曲凹模深度的確定 19
5.4 彎曲95°的部分及落料 19
5.4.1彎曲95°的部分凸凹模工作尺寸計算 19
5.4.2落料工作部分尺寸確定 19
5.5模具結構形式的選擇 20
5.6卸料彈簧的選擇 20
5.7模具其它零件的結構尺寸 21
6 總結 24
7致謝 25
參考文獻 26