數控車床的六角回轉刀架的機構設計

摘要

本文主要研究數控車床的六角回轉刀架的機構結構和動作原理。六角回轉刀架主要分為分度機構、液壓機構、精定位機構三大機構。分度機構負責刀架的主要?jiǎng)幼?，精定位機構決定了刀架重復定位的精度。本文拼提出一套可行的設計方案，并就分度機構和精定位機構進行詳細的研究和設計。其中分度機構的核心設計方案采用端齒盤離合器，精定位機構的核心設計方案采用插銷機構。最終,完成了數控車床的六角回轉刀架的機構設計。

關鍵詞：數控；車床；六角回轉刀架；機構；設計



The instiution design of turret carriage

ABSTRACT

Production become more efficient and the pursuit of the machine tool change process automation becomes necessary, a variety of automatic tool changer came into being. The most representative is hexagonal rotating turret, it is economical and practical.
This paper studies the institutional structure and operation principle of the hexagonal rotating turret of lathe .The hexagonal rotating turret is divided into sub-degree rotating turret part, hydraulic pressure part, the final precise positioning mechanism part. The sub-degree rotating turret part makes the turret turning ,the final precise positioning mechanism part determines the repeat positioning accuracy of turret. This paper proposes a viable spell design, and make main design on sub-degree institutions and the final positioning mechanism for detailed study .and design of sub-degree institutions where the core design with the crown wheel clutch, precision positioning mechanism with bolt part core design . Finaly completed the instiution design of hexagonal rotating turret .

Keywords: instiution ；design ；turret ；carriage





目錄

摘要 I
ABSTRACT II
第一章 緒論 1
1.1前言 1
1.2數控技術的發展趨勢 2
1.3我國數控機床的現狀與發展前景 3
1.4自動換刀技術及數控車床的自動換刀裝置 4
1.5本課題研究的內容 5
第二章 自動換刀技術發展 6
2.1自動換刀技術產生的背景及其意義 6
2.2自動換刀裝置的形式 6
2.2.1回轉刀架式自動換刀裝置 6
2.2.2換主軸換刀 9
2.2.3更換主軸箱換刀 9
2.2.4帶刀庫的自動換刀系統 10
2.3自動換刀裝置未來的發展方向 11
第三章 數控車床的六角回轉刀架的設計原理和依據 12
3.1數控車床的六角回轉刀架的換刀工程 12
3.2數控車床的六角回轉刀架的設計要求 13
3.3數控車床的六角回轉刀架的機構設計中的幾個主要問題 13
3.4本章小結 14
第四章 數控車床的六角回轉刀架的機構設計 15
4.1數控車床的六角回轉刀架的分度機構結構設計 15
4.1.1分度機構結構設計的總思路 15
4.1.2分度機構的刀架主軸設計 15
4.1.3主活塞的設計 17
4.1.4端齒盤離合器的設計 21
4.1.5分度活塞的設計 29
4.2精定位機構——活動插銷機構設計 30
4.2.1定位原理、設計思路 30
4.2.2材料選擇 30
4.2.3活動插銷機構的結構設計 30
4.2.4插銷機構的公差帶設計 31
4.2.5對插銷軸進行校核 32
4.2.6校核結論 33
4.3 刀夾襯套的設計簡述 34
參考文獻 38
致謝 39
附錄清單 40