8路智能搶答器畢業設計


摘  要

隨著電子技術的飛速發展，基于單片機的控制系統已廣泛運用于各個行業。在智能化的今天，單片機系統已經代替了傳統的控制系統的常規電子路線。
電子只能搶答器在搶答過程中，為了知道哪一組或哪一位選手先答題，必須要設計一個系統來完成這個任務。本系統采用AT89S51單片機作為核心。控制系統的四個模塊分別為：單片機最小系統、顯示模塊、顯示驅動模塊、搶答開關模塊。

關鍵詞：單片機；顯示；驅動；搶答

Abstract

Along with the rapid development of electronic technology, based on single-chip microcomputer control system has been widely used in various industries. The intelligent today, SCM system has replaced the traditional control system of conventional electronic route.
Electronic only in vies to answer first process vies to answer first, in order to know what a group or a player to answer, must design a system to complete this task. This system USES AT89S51 as the core. Control system of four modules: SCM system, display module, the smallest display driver module, vies to answer first switch module.

Keywords: SCM, Display, Drive, Vies to answer first

目    錄
引言   ………………………………………………………………………………………1
1.系統設計點 ……………………………………………………………………………1
2.搶答器的硬件設計……………………………………………………………………1
2.1設計思路…………………………………………………………………………………1
2.2硬件設計…………………………………………………………………………………3
2.3單片機芯片的選擇………………………………………………………………………3
2.3模塊性能分析……………………………………………………………………………5
2.4獨立式鍵盤………………………………………………………………………………5
2.5 LED數碼管顯示…………………………………………………………………………5
2.6最小系統圖………………………………………………………………………………6
2.7時序控制電路……………………………………………………………………………7
2.8第一有效搶答信號的處理………………………………………………………………7
2.9倒計時的處理……………………………………………………………………………7
3搶答器軟件設計…………………………………………………………………………8
總結…………………………………………………………………………………………9
謝辭…………………………………………………………………………………………10
參考文獻……………………………………………………………………………………11
附錄…………………………………………………………………………………………12
主程序………………………………………………………………………………………14