智能轉速測量系統的軟件設計
摘 要
轉速是工程中應用非常廣泛的一個參數，其測量方法較多，隨著單片機對脈沖數字信號的處理能力越來越強大，使得全數字量系統越來越普及，并且使轉速測量系統也可以用全數字化處理。
本文在對了解轉速測量理論與掌握單片機原理的基礎上，根據硬件設計，提出系統程序設計方案，構建軟件系統，以實現智能轉速測量與顯示的功能。
本設計根據基于AT89C51單片機的測速測量電路，設計出轉速測量軟件系統，此系統包含系統初始化程序的設計、鍵盤掃描程序的設計、數據接收和處理程序的設計、顯示程序的設計四個模塊。對所設計的軟件系統通過μVision3軟件對其進行程序調試。最后，對構建的系統利用設計的電路進行調試，對測量指標進行了分析、比較并提出改進方案。在設計中測量方法采用M法進行測量，編譯語言采用C語言進行編譯。
    本課題完成了軟件系統的設計，實現了智能轉速系統的轉速計算、顯示功能，同時實現鍵盤的開始/停止功能，完成了設計的要求。
關鍵詞：單片機 轉速測量 軟件設計
Intelligent rotational speed measurement system of software design
Abstract
Rotational speed is the engineering of a very wide range of parameters, its measurement more, with the SCM digital signal on the pulse of more and more powerful processing capability, making the volume of all-digital system is becoming increasingly popular, and so rotational speed measurement system can be used to deal with all-digital.
In this paper, the understanding of the theory and master rotational speed measurement based on the principle of SCM, the system program design, to build software systems, compiler, in order to achieve intelligent Rotational speed measurement and display functions.      In this paper, accroding to the tachometric survey system based on the SCM of AT89C51, I designed the software part of it. This system includes four module: the initializer code design, the keyboard scanning code design, the data receiving and processing code design and the displaying code design. I set up them using the software ofμVision3. At last, the builded system is setted up through circuit. The measured index were analysed and compared and the improved programmes were proposed. M method was adopt in the measuring and the language of C was adopt to comple.
The design of software system of this project is completed. The function of   calculating and displaying the speed of rotation and the beginning and stoping of keyboard are finished. Finally I achevie the requirment of design.

Key words: SCM  tachometric survey  Software Design
 
目錄
中文摘要 I
英文摘要 II
1  緒論 1
1．1課題研究目的和意義 1
1．2轉速測量在國內外研究情況 1
1．3主要內容和存在的問題 2
1．3．1研究的主要內容 2
1．3．2需解決的問題 2
2  基于單片機的轉速測量方法及原理 3
2.1單片機測量轉速的方法 3
2.2轉速測量原理 4
2.2.1測周期法“T法” 4
2.2.2測頻法“M法” 4
2.2.3測頻測周法M/T法 5
3  智能轉速測量系統的硬件結構 7
3.1系統的硬件結構 7
3.2硬件電路中主要部件的介紹 9
4  智能轉速測量系統的軟件設計 11
4.1單片機C51的介紹 11
4.1.1單片機C語言與匯編語言 11
4.1.2 C51對標準C語言的擴展 12
4.2程序設計 12
4.2.1工作方式及控制字設置 12
4.2.2變量分配及程序的初始化 14
4.2.3顯示功能的實現 15
4.2.4鍵盤的功能的實現與設計 17
4.3系統流程 17
5  程序調試及固化 18
5．1單片機開發平臺簡介 18
5．2本系統開發平臺 18
5.2.1keil C51軟件集成開發環境 18
5.2.2程序調試 18
6  結論 22
6.1主要研究結論 22
6.2研究展望 23
參考文獻 24
致  謝 26
附錄 1 電路圖 29
附錄 2 源程序 30