摘 要
運用Pro/E軟件完成風扇的三維建模設計，其中運用了Pro/E的草繪模塊、曲面模塊、零件模塊等共同完成了風扇的葉片，后蓋，前罩，底盤，支架，調空體等部件的模型設計，同時利用Pro/E的組件模塊進行了部件的裝配。通過對各部件的設計，證明了Pro/E軟件在進行復雜典型產品開發過程中具有簡單、方便、快捷等特點；同時在進行裝配過程中能夠?qū)δ骋涣悴考M(jìn)行修飾，使裝配效果更加完善。
關鍵詞： 減速器 Pro/E 三維建模設計




The fan of modeling design based on Pre/E
Abstract
In this paper, the three-dimensional modeling design of the fan was designed by
the software of Pro/E. The design of five modeling Which include the fan blades, the
front cover, the back cover, the fame and body components was completed by the Sketch
of the module, surface modules, module parts of Pro/E. At the same time, module assembly
components and interference testing was complete through the component of Pro/E. Through
the design of the component, which prove that Pro/E software is simple, convenient, and fast
in a typical complex product development process. At the same time ,the assembly process can
be carried out on a modified parts so that the effect of complete assembly become more perfect.

Keywords: Fan, Pro/E, Three-dimensional modeling design







目 錄
一 緒論………………………………………………………………………………4
1.1三維造型設計的現狀和發展………………………………………………4
1.2常用三維造型軟件介紹……………………………………………………5
1.3 Pro/E軟件介紹……………………………………………………………5
1.4本文的主要研究?jī)?nèi)容………………………………………………………6
二 風扇造型設計及裝配………………………………………………………9
2.1風扇組成部件設計………………………………………………………9
2.1.1減速器上下仰俯機構的設計………………………………………11
2.1.2減速器左右搖擺機構的設計………………………………………11
2.2風扇的裝配………………………………………………………………11
2.2.1新建組件文件……………………………………………………11
2.2.2在缺省模式裝配支架底盤………………………………………11
2.2.3裝配調控體………………………………………………………11
2.2.4裝配扇頭…………………………………………………………11
2.2.5裝配葉片…………………………………………………………11
2.2.6裝配網罩…………………………………………………………11
2.2.7裝配檢查其余部件………………………………………………11
2.2.8生成裝配爆炸圖…………………………………………………11

三 參考文獻…………………………………………………………………21
致謝…………………………………………………………………………22