畢業論文 基于單片機定時鬧鐘系統設計.doc
約46頁DOC格式手機打開展開
畢業論文 基于單片機定時鬧鐘系統設計,摘要隨著科技的快速發展和生活水平的不斷提高,人們對時鐘的精確度和實用性要求越來越高。本文采用at89s52單片機,通過ds1302日歷芯片進行定時,并通過lcd1602液晶進行顯示。通過c語言程序編寫,將設計出更準確定時、更省電的數字時鐘。單片機數字時鐘具有設置時間、日期、星期的基本功能,并且能夠顯示年、月、日、時、分...
內容介紹
此文檔由會員 ljjwl8321 發布
摘要
隨著科技的快速發展和生活水平的不斷提高,人們對時鐘的精確度和實用性要求越來越高。本文采用AT89S52單片機,通過DS1302日歷芯片進行定時,并通過LCD1602液晶進行顯示。通過C語言程序編寫,將設計出更準確定時、更省電的數字時鐘。單片機數字時鐘具有設置時間、日期、星期的基本功能,并且能夠顯示年、月、日、時、分、秒、星期。單片機數字鐘不管在性能還是在樣式上都發生了質的變化,實踐證明單片機數字時鐘具有更加準確性、精密性等功能。
關鍵字:數字時鐘;DS1302;LCD1602;AT89S52
Abstract
In daily life, time is science, technology and everyday life is one of the most basic physics, we often deal with temporal clocks, such as hand watch, wall clock, even on a computer program, the clock on the phone can be generalized a clock display on the clock, along with the rapid development of technology and the continuous improvement of living standards, people on the clock's accuracy and practical demand is higher and higher. Based on the single chip microcomputer principle, USES the monolithic integrated circuit AT89S52 series, through the hardware circuit and software production procedure formulation, will design a more accurate timing, electricity -saving digital clock, SCM in performance or digital clock no matter in style have undergone a qualitative change, digital clock has proved microcontroller more accuracy, precision sex etc. Function.
Key Words:Digital clock ; DS1302; LCD1602;
目錄
第一章 引言 1
1.1單片機的發展史 1
1.2 單片機的應用 1
1.3 單片機發展趨勢 2
1.4 數字時鐘方案論證比較 3
1.4.1 數字電路與單片機性能比較 3
1.4.2數碼管與LCD液晶顯示性能比較 4
1.4.3單片機編程時鐘與時鐘芯片性能比較 4
第二章 系統的硬件設計與實現 6
2.1 系統概述 6
2.2模塊電路的設計 7
2.2.1時鐘電路 7
2.2.3 復位電路與晶振電路 11
2.3 總體電路圖設計 11
第三章 系統的軟件設計與實現 13
3.1 程序功能 13
3.2 編程思路 13
3.3 程序設計流程圖 13
3.3.1 DS1302軟件設計流程圖 14
3.3.2 LCD1602程序序流程圖 15
3.4寫入顯示數據到LCD子程序模塊設計 17
3.5時間鬧鈴設置流程 18
第四章 仿真軟件Proteus ISIS使用方法簡單介紹 19
4.1 簡介 19
4.2 簡單項目設計過程 20
4.3仿真執行 24
4.3.1一般仿真 24
第五章 系統組裝與調試 26
5.1 硬件系統的組裝與調試 26
5.2 軟件調試 27
總結 29
參考文獻 30
附錄1單片機定時鬧鐘程序源代碼 31
致謝 41
隨著科技的快速發展和生活水平的不斷提高,人們對時鐘的精確度和實用性要求越來越高。本文采用AT89S52單片機,通過DS1302日歷芯片進行定時,并通過LCD1602液晶進行顯示。通過C語言程序編寫,將設計出更準確定時、更省電的數字時鐘。單片機數字時鐘具有設置時間、日期、星期的基本功能,并且能夠顯示年、月、日、時、分、秒、星期。單片機數字鐘不管在性能還是在樣式上都發生了質的變化,實踐證明單片機數字時鐘具有更加準確性、精密性等功能。
關鍵字:數字時鐘;DS1302;LCD1602;AT89S52
Abstract
In daily life, time is science, technology and everyday life is one of the most basic physics, we often deal with temporal clocks, such as hand watch, wall clock, even on a computer program, the clock on the phone can be generalized a clock display on the clock, along with the rapid development of technology and the continuous improvement of living standards, people on the clock's accuracy and practical demand is higher and higher. Based on the single chip microcomputer principle, USES the monolithic integrated circuit AT89S52 series, through the hardware circuit and software production procedure formulation, will design a more accurate timing, electricity -saving digital clock, SCM in performance or digital clock no matter in style have undergone a qualitative change, digital clock has proved microcontroller more accuracy, precision sex etc. Function.
Key Words:Digital clock ; DS1302; LCD1602;
目錄
第一章 引言 1
1.1單片機的發展史 1
1.2 單片機的應用 1
1.3 單片機發展趨勢 2
1.4 數字時鐘方案論證比較 3
1.4.1 數字電路與單片機性能比較 3
1.4.2數碼管與LCD液晶顯示性能比較 4
1.4.3單片機編程時鐘與時鐘芯片性能比較 4
第二章 系統的硬件設計與實現 6
2.1 系統概述 6
2.2模塊電路的設計 7
2.2.1時鐘電路 7
2.2.3 復位電路與晶振電路 11
2.3 總體電路圖設計 11
第三章 系統的軟件設計與實現 13
3.1 程序功能 13
3.2 編程思路 13
3.3 程序設計流程圖 13
3.3.1 DS1302軟件設計流程圖 14
3.3.2 LCD1602程序序流程圖 15
3.4寫入顯示數據到LCD子程序模塊設計 17
3.5時間鬧鈴設置流程 18
第四章 仿真軟件Proteus ISIS使用方法簡單介紹 19
4.1 簡介 19
4.2 簡單項目設計過程 20
4.3仿真執行 24
4.3.1一般仿真 24
第五章 系統組裝與調試 26
5.1 硬件系統的組裝與調試 26
5.2 軟件調試 27
總結 29
參考文獻 30
附錄1單片機定時鬧鐘程序源代碼 31
致謝 41