淺析鑄鐵機的工作原理及應用

目錄

摘   要 I
Abstract II
引   言 1
第 1 章 鑄鐵機的工作原理 2
1.1鑄鐵機概述 2
1.2鑄鐵機的結構 2
1.3鑄鐵機的工作原理 3
第 2 章 鑄鐵機生產車間工藝流程 1
2.1鑄鐵機的布置形式 1
2.2鑄鐵過程中的主要控制參數、操作時應注意的問題 1
2.3鑄鐵機的設計要求 2
第 3 章 鑄鐵機的應用與發展 1
3.1鑄鐵機設備應用現狀 1
3.2鑄鐵機的發展展望 2
結 束 語 3
致    謝 4
參考文獻 5

 
 
摘   要
在高爐冶煉生產過程中，為了解決鐵水的運輸及儲存問題，鑄鐵機是將液態鐵水連續鑄造成鐵塊的設備。從結構上看，它是一臺傾斜向上的裝有許多鐵模和鏈板的循環鏈帶，環繞著上下兩端的星形大齒輪運轉，上端的星形大齒輪為傳動輪，由電動機傳動，下端的星形大齒輪為導向輪，導向輪上安裝的軸承位置可以移動，以便調節鏈帶的松緊度。按照滾輪的固定形式，鑄鐵機一般可分為滾輪固定式鑄鐵機和滾輪移動式鑄鐵機。
本文在參考國內外大量參考文獻的基礎上，闡述了鑄鐵機的工作原理及應用，詳盡分析了鑄鐵機的結構特點，并對鑄鐵機的應用前景和發展作了展望。

關鍵詞： 鑄鐵機；結構；原理；
 
Abstract
In the blast furnace smelting process, in order to solve the problem of molten iron transport and storage of liquid iron, cast iron machine is a continuous cast iron equipment. Look from the structure, it is a tilt upward with a lot of iron and a chain plate cycle chain, surround the upper and lower ends of the star-shaped gear to rotate, the upper end of the star gear for driving wheel, a motor drive, the lower end of the star gear for guiding wheel, guide wheel is installed on the bearing position mobile, to adjust the belt tightness. In accordance with the roller fixed form, cast iron machine in general can be divided into fixed cast iron roller machine and wheel moving iron casting machine.
This article on the basis of a large number of domestic and foreign references on the basis of cast iron machine, describes the work principle and the application, a detailed analysis of cast iron for the structure characteristics, and the cast iron machine application prospect and development foreground.
Key words: Cast iron machine; structure; principle;