企業的總平面布局及機加車間的仿真研究[論文+外文翻譯+答辯ppt+開題報告]

摘  要
　　　本文主要是對新建企業總平面布局及機加車間進行仿真研究，以達到工廠的合理布置和機加車間高效運行的目的。課題的基本設計在工廠布局方面采用了系統布置設計（SLP）的方法，是一種以作業單位物流與非物流的相互關系分析為主線的規劃設計方法，根據最終的綜合物流相關表繪制位置和面積相關圖。機加車間仿真方面是基于Flexsim軟件進行建模，運用排序聚類分析法對機加車間零件的生產進行分組，分組后按照U型布置，通過設置產品的間隔到達時間和數量，端口的流向進行仿真，優化。通過設計后，以綜合物流相關表為依據，對工廠的10個作業單位進行了合理布局，減少了物流搬運等問題。仿真通過對Source，暫存和機床加工時間的設置，進行仿真分析，雖然在既滿足生產能力而又要保證機床利用率方面存在一定交叉問題，但經過仿真多次運行后，可以最大程度提高機床的利用率，獲得最佳的經濟和和會效益，所以無論是SLP，還是Flexsim在工廠布局和仿真方面都值得使用。

關鍵詞：綜合物流相關表、系統布置設計、Flexsim仿真

 

 

 

 

 

 

 

　　　　Abstract
　　　This article is total new plant and machine shop layout simulation study, in order to achieve a reasonable layout of factory and machine shop the purpose of efficient operation. The basic design issues in the plant layout design using the system layout (SLP) method is a kind of operating units and non-logistics logistics analysis of the relationship between the main line of the planning and design methods, according to the final table of the integrated logistics related to the location and mapping area correlation diagram. Aspects of machine shop simulation model based on Flexsim software, the use of sorting classification of parts of the production machine shop group, grouped according to U-shaped layout, the product of the interval by setting the arrival time and number of ports of the flow simulation, optimization. By design, an integrated logistics and related tables based on the plant's 10 operating units of the rational distribution, reducing the material handling and other issues. Simulation by Source, temporary and machining time settings, the simulation analysis, although both have to meet the production capacity and utilization to ensure that there are certain cross-machine problem, but after running the simulation many times, you can maximize machine utilization, the best and will benefit the economy and, so it is SLP, or Flexsim in factory layout and simulation are worth using.
Keywords: integrated logistics related tables, system layout design, Flexsim simulation

 

目錄
第一章  緒論 1
　　　1.1 研究背景和意義 1
　　　1.2 國內外研究現狀 2
第二章   機械新廠的總平面布置設計 4
　　　2.1引言 4
　　　2.2 題目原始條件 7
　　　2.3作業單元?jiǎng)澐?nbsp;8
　　　2.4 A-K零件生產工藝過程表 8
　　　2.5產品工藝過程分析 11
　　　2.6 物流分析 14
　　　2.7 作業單位非物流相互關系分析 16
　　　2.8 作業單位綜合相互關系分析 17
　　　2.9工廠總平面布置 20
第三章  機加車間的仿真研究 23
　　　3.1 引言 23
3.1.1 Flexsim仿真時間控件 23
3.1.2仿真模型對象控件 24
　　　3.2 建模的思想與仿真步驟 24
　　　3.3 基礎數據 25
　　　3.4 系統分析與計算 26
　　　3.5 車間的建模與仿真 28
第四章 結論與展望 51
參考文獻 52