資源包括：正文DOC格式共22頁 4491字

摘 要

在電子技術中，頻率是最基本的參數之一，并且與許多電參量的測量方案、測量結果都有十分密切的關系，因此頻率的測量就顯得更為重要。測量頻率的方法有多種,其中電子計數器測量頻率具有精度高、使用方便、測量迅速，以及便于實現測量過程自動化等優點，是頻率測量的重要手段之一。數字頻率計測頻有兩種方式：一是直接測頻法，即在一定閘門時間內測量被測信號的脈沖個數；二是間接測頻法，如周期測頻法。直接測頻法適用于高頻信號的頻率測量，間接測頻法適用于低頻信號的頻率測量。 本文介紹了數字頻率計的設計過程，并用EWB對電路進行了仿真。

Abstract

In electronic technology, the frequency is one of the most basic parameters, and the Senate, and many of the measurement, the measurement results have very close relations, so the frequency of measurements, it is much more important. Measuring the frequency of a number of means, including electronic counter measure the frequency with high precision, ease of use, rapid measurement, and to facilitate realization of the advantages of full automation of measurement, frequency measurement is one of the important means. Digital frequency of measuring frequency in two ways: First, direct measurement of the frequency, or within a certain time gates measuring the number of detected signals in pulses; Second, the frequency of indirect measurement, such as measuring the frequency of cycles. Direct Frequency Measurement Law is applicable to high-frequency signals in the frequency of measurements, indirect Frequency Measurement Law is applicable to low-frequency signals in the frequency of measurement. In this paper, digital frequency of the design process, with EWB and the simulation of the circuit.

目 錄
摘 要 1
Abstract 2
1.方案比較 3
1.1方案一 數字頻率計 3
1.2 方案二 由ICM7216D構成的單片數字頻率計 4
2.實驗原理 7
2.1 數字頻率計的基本原理 7
2．2數字頻率計的主要技術指標 8
2.2.1頻率準確度 8
2.2.2頻率測量范圍 8
2.3各部分的作用及電路選擇 8
2.3.1放大整形電路 8
2.3.2 時基電路 9
2.3.3 邏輯控制電路 11
2.3.4 鎖存器 11
2.3.5計數器 12
2.3.6 譯碼電路 12
3 各部分電路仿真 14
3.1放大整形電路的電路圖和仿真 14
3.2 時基電路的電路圖和仿真 15
3.3 邏輯控制電路的電路圖和仿真 16
3.4 計數器的電路圖和仿真 17
3.5 譯碼電路的電路圖和仿真 18
4總原理圖 19
5小結 19
6元件清單 21
7參考文獻 21