畢業論文 松式絡筒工藝設計與質量控制

17頁共計8228字

摘要

供染色的筒紗比普通的筒紗要求更高，特別是要求筒紗的密度均勻一致、有非常精密的無重疊的紗線層、錠長錠徑更加準確、紗線的退繞更好，這種卷裝在染色過程中具有最佳的液體滲透性。本文對影響筒紗密度及均勻性的相關因素進行了實驗分析，對相關工藝參數進行了優化。得出了以下結論：
松式絡筒速度不影響筒紗密度；臂壓力對密度的影響較大，一般在密度相差較大時優先考慮調整臂壓力；張力是控制筒紗密度的關鍵因素，在筒紗密度相差不大時進行微調；超喂的目的是充分釋放張力，根據紗線品種的不同可選擇不同的超喂比；交叉角主要是配合軟邊表消除硬邊和方便下道工序退繞，一般情況選擇精密型，根據紗線品種可選擇不同的交叉角。交叉角一般不宜選擇太大；溫濕度對松式卷裝密度影響較大，一般要控制它的穩定性。
Abstract
Soft winders for dyeing than ordinary demanding, especially the requirements of uniform density winders package, there is no duplication of sophisticated yarn layer diameter ingot ingot length is more accurate and better yarn around the back, This volume in a dyeing process of the liquid permeability of the best. In this paper, effects of density and uniformity Soft winders other relevant factors that the experimental analysis of the relevant process parameters were optimized. Drew the following conclusions:
Soft winders does not affect the speed of winding density; arm pressure on the density of the larger, more general difference in the density when the pressure to give priority to the adjustment arm; winders package tension is to control the density of the key factors, an insignificant difference in the density of Soft winders When fine-tuning; the purpose of feed roller the full release of tension, according to the different choice of yarns of different varieties of feed roller ratio; cross angle is in line with the soft side of the main table to facilitate the elimination of hard-edged and procedures under the Unwinding generally choose precision type, in accordance with choice of different varieties of yarn cross angle. Angle cross-general should not be too much choice; temperature and humidity on the pine-style volume density greater impact in general to control its stability.

Key words: density arm pressure tension feed roller cross angle
目錄

1 緒 論--------------------------------------------------------------------------------------------1
1.1課題背景及意義--------------------------------------------------------------------------1
1.2國內外研究現狀--------------------------------------------------------------------------1
1.3課題主要研究內容-----------------------------------------------------------------------2
2高速松式絡筒機的性能原理----------------------------------------------------------3
2.1高速松式絡筒機的工藝過程及機器結構組成------------------------------------3
2.2計算機數據處理終端--------------------------------------------------------------------3
2.3高速松式絡筒機的主要部件及特點-------------------------------------------------3
2.3.1導紗裝置------------------------------------------------------------------------------3
2.3.2卷繞支撐裝置------------------------------------------------------------------------4
2.3.3喂紗裝置------------------------------------------------------------------------------4
3高速松式絡筒工藝設計與質量控制-----------------------------------------------6
3.1染色筒子的質量要求---------------------------------------------------------------------6
3.2影響筒紗密度的因素與控制方法-----------------------------------------------------6
3.3實驗及分析----------------------------------------------------------------------------------7
3.3.1工藝參數對筒紗密度的影響-----------------------------------------------------7
3.3.2工藝的優化設計---------------------------------------------------------------------10
4 結 論--------------------------------------------------------------------------------------------13
參考文獻------------------------------------------------------------------------------------------14
關鍵詞： 密度 臂壓力 超喂 交叉角 張力
參考文獻
[1]董敬貴.色織工藝學 .北京：中國紡織出版社,2008
[2]曹吉康. SG80-1型60錠松式絡筒機. 上海紡織科技,1981,6：15
[3]王長源.SG80-1型金屬槽筒松式絡筒機鑒定會議 .上海紡織科技,1981,8：17
[4]王瑞生，王樂娥.松式絡筒機的技術改造. 棉紡織技術,1981,4：14-17
[5]曲琨玲.費縣紡機廠制成松式絡筒機. 山東紡織科技,1988,2：66
[6]陶發明.DP-D松式絡筒機的主要性能分析. 毛紡科技（期刊）,2008，9
[7] 滕子峰. 筒子染色工藝的設備配套在引進過程中應注意的問題. 山東紡織科技, 2003,6：3-6
[8]戴冠雄,鮑力民,李嘉祿,王立晶,于慶平. 頻譜分析與旋轉設計在松式絡筒張力分析中的應用. 紡織學報, 1986,8： 20-23+4
[9]劉維群.棉筒子紗染色色花的成因及防止措施.印染, 2005,3：19-20 [10］裘愉發.精密絡筒生產技術.絲綢,2003,4：26-27
[11］鄒衡.紗線筒子染色工程.北京：中國紡織出版社，2004
[12] 曹穎.新型卷繞技術 New winding technologies .國際紡織導報MELLIAND CHINA 2008，2