目 錄

摘要…………………………………………………………………………………1

Abstract…………………………………………………………………………2

前言………………………………………………………………………………3

課題相關的知識………………………………………………………………4

　　1.1沖壓的概念、特點及應用……………………………………………………4

 1.2目前沖壓技術的發展方向…………………………………………………5

 1.3設計課題及設計任務書…………………………………………………5

    1.3.1課題研究的目的及基本要求………………………………………………

　　  1.3.2 設計任務書………………………………………………………………6

第2章 工藝方案分析及確定………………………………………………………6

 2.1 零件的工藝分析………………………………………………………………6

 2.2 工藝方案的確定………………………………………………………………7

 2.3 排樣的確定……………………………………………………………………7

　　  2.3.1沖裁件的排樣…………………………………………………………7

　　  2.3.2材料利用率……………………………………………………………8

　　  2.3.3搭邊…………………………………………………………………8

第3章 工藝設計與計算……………………………………………………………9

 3.1 沖壓力與壓力中心的算……………………………………………………9

　　  3.1.1沖裁方式與沖壓力的計算………………………………………………9

　　  3.1.2 沖裁力的計算…………………………………………………………9

　　  3.1.3卸料力、推件力的計算…………………………………………………10

 3.2 工作零件刃口尺寸計算……………………………………………………10

 3.3 工件零件結構設計………………………………………………………111

　　  3.3.1 凹模尺寸………………………………………………………………12

　　  3.3.2 凹凸模尺寸………………………………………………………13

　　  3.3.3沖孔凸模尺寸………………………………………………………………

第4章 其他模具結構零件……………………………………………………………

　　4.1其他模具結構零件…………………………………………………………15

　　4.2典型零件加工工藝方案如下………………………………………………16

 4.3沖壓設備的選用……………………………………………………

第5章 模具裝配圖與零件的裝配圖……………………………………………… 

5.1  模具的裝配圖…………………………………………………………

　　5.2 模具的零件圖………………………………………………………………

　　  5.2.1沖孔排樣圖………………………………………………………………

　　  5.2.2凸凹模的零件圖………………………………………………………

參考文獻…………………………………………………………………………

致謝……………………………………………………………………………… 

摘 要

　　　模具是現代工業生產中重要的工藝裝備之一。在鑄造、鍛造、沖壓、塑料、橡膠、玻璃、粉末冶金、陶瓷等生產行業中得到廣泛應用。某些發達國家的模具總產值以超過機床工業的總產值在這些國家，模具工業已擺脫了從屬地位而發展成為獨立的行業。近年來，我國的模具工業也有了較大的發展，模具制造工藝和生產裝備智能化程度越來越高，極大地提高了模具制造的精度、質量和生產率。

　　　本模具的主要作用就是落料和沖孔，該模具在設計時不僅要根據沖裁件的材料選擇模具的材料，還要根據沖裁件的形狀、尺寸和精度來確定模具的類型和沖裁的工藝方案。確定合理的沖裁間隙是本模具的重中之重，它不僅影響沖裁件的形狀、尺寸和精度，還影響模具的使用壽命。在模具材料的選擇時應注意材料的性能和強度。應盡量選擇模具的標準件，這樣不僅可以提高模具的壽命還可以縮短模具的制造周期。

　　　在模具設計時不僅要考慮要使做出的零件能滿足工作要求，還要保證它的使用壽命。在本次設計中主要是考慮到它的實際工作環境和必須完成的設計任務，模架采用后側導柱模架，凹模采用洞口形狀凹模，這樣可以一次完成全部的工序加工，在設計中要考慮到很多關于我所設計零件的知識，包括它的使用場合，外觀等。通過這次的設計使我深深的體會到怎樣才能把所學的東西更好的運用到實踐中，設計過程中應注意的問題，使自己在沖壓模方面有了更深更多的了解。

　　　模具的精度比較高在使用的過程中要合理的保養，發現問題要及時的修復，這樣才能保證產品的質量，提高模具壽命。 

  

關鍵字：連接件，精度，落料沖孔，復合模

　　

Abstract

　　　Modern industrial production tooling is one of the important technological equipment. In casting, forging, stamping, plastic, rubber, glass, ceramic, etc, powder metallurgy industry production is widely used. Some developed countries with over the mould of machine tool industry total output value in these countries, mould industry have cut out the submissive position and become independent industry. In recent years, our country mold industry also has witnessed rapid development, mould manufacturing process and production equipment intelligentize degree is higher and higher, greatly enhancing the mould manufacturing precision, quality and productivity 

　　　This is the main function of the mould and punching blanking, the mould in the design not only according to the blanking pieces of material selection of materials, but also according to mould blanking pieces of shapes, sizes and precision to determine the types of dies and blanking process scheme. The determination of reasonable cutting clearance is the pinnacle of the mould, it not only affects blanking pieces of shapes, sizes and precision mould, still affect the service life. In the mold the choice of materials should be paid attention to when the properties of materials and strength. Should choose as far as possible, so that the standard mould can not only improve the service life of mould can shorten mould manufacturing cycle.

　　　In the mold design should be given not only to make a parts can meet the job requirements, but also ensure that its service life. In the design of the main consideration to its actual working environment and must complete the task, formwork design by side guide column formwork, concave die adopt hole shape dies.the, so can a complete the process in the design, want to consider a lot about what I design parts of knowledge, including its use occasions, appearance, etc. Through this design makes me deeply realized how to combine the use of anything better to practice, design process problems should be paid attention to, make oneself in progressive metal stamping has a deeper more about.

　　　The accuracy is higher in use process to reasonable maintenance, found that the problem should be timely repair, such ability assure product quality, improve die life. 

Keyword: Nitrides；The bridge piece； the precision； falls the material punch holes； the superposable die