摘要

隨著計算機技術的發展和電路仿真軟件的不斷出現，電路仿真技術愈來愈受到人們的重視，很多學校已將電路仿真技術作為教學內容。Multisim10.0是美國國家儀器公司( NI公司)推出的最新電子電路仿真軟件版本, 是一個原理電路設計、電路功能測試的虛擬仿真軟件。

  本論文首先給出了電路系統綜合設計的基礎知識，包括電路系統綜合設計的一般方法、設計步驟以及系統綜合設計應注意的問題；接著以搶答器系統為例，通過分析多路搶答系統的設計要求，按照綜合系統設計的一般方法和步驟，先進行系統的方案設計，再進行原理電路的設計，包括總體電路設計和單元電路設計，給出了總體電路結構圖和單元電路圖；最后用 Multisim對所設計的電路進行仿真分析，給出了復雜電路系統仿真分析的一般方法和步驟。

其次對搶答器系統的Multisim仿真進行探討，研究了Multisim系統的特點、優勢以及Multisim使用的基本原理，在系統設計與實現中，重點對Multisim在多路搶答系統的設計中的應用做了詳細的分析，同時對Multisim在電路仿真設計中的功能進行了介紹。

最后，對系統的性能進行了可行性分析論證。

關鍵詞：Multisim，仿真，搶答器

 

Abstract

With the development of computer technology and circuit simulation software, the continual emergence of circuit simulation technology more and more attention, many schools already have a circuit simulation technology as a teaching content. Multisim10.0 is the launch of the latest National Instruments (NI) electronic circuit simulation software version Is a schematic circuit design, circuit simulation software for functional testing.

This chapter gives the first integrated circuit design system, including integrated circuit design system, the general method of design steps, as well as comprehensive design system should pay attention to the problem; then to answer devices management systems for example, by analyzing the traffic management system design requirements, integrated system design in accordance with the general methods and steps to carry out system design, and then carry out the principle of circuit design, including the overall road design, including the overall circuit design and circuit design, given the overall circuit structure and circuit unit; final Multisim for the use of circuit design simulation, given the complexity of the analysis of circuit simulation methods and procedures in general. 

Secondly, the answer devices management system to explore Multisim positioning technology to study the characteristics of the system Multisim, Multisim advantages, as well as the use of the basic principles of system design and implementation, the focus of Multisim in the traffic management system design in detail analysis, at the same time Multisim circuit simulation in the design of the functions are introduced. 

Finally, the performance of the system analysis carried out a feasibility demonstration. 

Key words: Multisim，Simulation , Answer Devices System

 

目錄

摘要 I

ABSTRACT II

1  引言 1

1.1  研究背景 1

1.2  研究多路搶答器的目的意義 1

2  總體設計 2

2.1  MULTISIM簡介 2

2.1.1  Multisim軟件的起源 2

2.1.2  Multisim10.0軟件介紹 2

2.1.3  Multisim 10.0 在電子實驗教學中的應用 3

2.2  多路搶答器 3

2.2.1  多路搶答器研究的設計要求 3

2.2.2  多路搶答器的工作原理框圖 3

2.2.3  基于Multisim10.0的多路搶答器的設計與仿真 4

2.3  多路搶答器的實現 5

2.3.1  擬采用的研究方法和技術路線 5

2.3.2  系統綜合設計應注意的問題 5

3  搶答器搶答模塊的設計與實現 7

3.1  電路芯片 7

3.1.1  74LS175芯片功能簡介 7

3.1.2  74LS192芯片功能簡介 8

3.1.3  555芯片簡介 9

3.2  搶答模塊的仿真 10

4  倒計時模塊的設計與仿真 12

4.1  倒計時模塊的設計 12

4.1.1  74LS192組成的倒計時部分 12

4.1.2  555觸發器組成的脈沖觸發器 12

4.2  倒計時模塊的仿真 13

5  電路總圖 14

6  設計總結與展望 16

6.1  總結 16

6.2  展望 17

參考文獻 19

致謝 20

附錄  元件清單 21