電磁閥體進出油口孔加工組合機床液壓系統設計
1.8萬字 48頁
包括任務書，設計說明書，工序卡，零件圖、加工示意圖



摘 要
　　
電磁閥體進出油口孔加工組合機床，它的配置型式具有固定式液壓夾緊的單工位組合機床，這類組合機床夾具和工作臺都是固定不動的，動力滑臺實現進給運動。滑臺上的動力箱實現切削運動，根據工件結構特點，以及精確要求，采用結合面為定值基準面。 在基準面對應的另一圓柱面上，用壓塊壓緊，由于結合面的加工精度較高，以它為基面，完全可以達到要求的加工精度。
組合機床總體設計三圖一卡①“被加工零件工序圖”它是組合機床的設計的主要依據，它是制造使用，檢修和調整機床的重要技術條件②繪制加工示意圖，它是刀具夾具，多軸箱，液壓電器裝置設計及通用部件選擇主要原始資料，它是調整機床，刀具及試車依據。③繪制聯系和運動關系及檢驗機床各部件相對于位置及聯系是否滿足加工要求，通用部件的選擇是否合適，并為進一步開展主軸箱，夾具等專用部件，零件的設計提供依據。④相對生產率計算卡，它用來反映機床的加工過程，完成這一動作所需要的時間，切削用量，機床生產率及機床負荷率。

關鍵詞：組合機床、液壓系統、液壓缸，自動循環、主軸箱。



ABSTRACT

The solenoid valve body turn over oil buccal cavity processing aggregate machine-tool, its configuration has the simplex position aggregate machine-tool which the stationary hydraulic pressure clamps ,this kind of aggregate machine-tool jig and the work table all are fixed motionless, the power realizes for the movement. On power box realization cutting motion, according to the work piece unique feature, as well as the precise request, uses the junction plane for the definite value reduced plane. In the reduced plane correspondence another round cylinder, contracts with the briquetting, because the junction plane processing precision is higher, take it as the basic plane, definitely may meet the requirements the processing precision.
A geometry engine bed system design ---- three charts card (1) "is processed the components working procedure chart" it is the aggregate machine-tool design main basis, it makes the use, overhauls and adjusts the engine bed the important engineering factor (2) plan processing schematic drawing, it is the cutting tool jig, the hydraulic pressure electrical fittings design and the general part choice main firsthand information, it is adjusts the engine bed, the cutting tool and the test run basis. (3) The plan relation and the movement relations and the examination engine bed various parts are opposite to the position and relate whether satisfies the processing request, the general part choice is whether appropriate, and for further develops the headstock, the jig and so on the special-purpose part, the components design provides the basis. (4) The generic efficiency computation card, it uses for to reflect the engine bed the processing process, completes the time which this movement needs, the cutting specifications, the engine bed productivity and the engine bed load factor.

Key words: Aggregate machine-tool, hydraulic system, hydraulic cylinder, automatic circulation, headstock.


目錄
摘 要 I
ABSTRACT II
第一章 緒 論 1
第二章 電磁閥體進出油口孔的加工工藝 3
2.1零件的分析 3
2.1.1.零件的作用 3
2.1.2.零件的工藝分析 3
2.2工藝規程的設計 4
2.2.1.確定毛坯的制造形式 4
2.2.2.基準的選擇： 4
2.3制訂工藝路線 4
2.4確定工序尺寸及公差 6
2.5.鉆、擴、平刮、鉸孔的切削用量及其基本工時 10
第三章 電磁閥體的進出油口孔的加工組合機床液壓系統的設計 12
3.1負載分析 13
3.2.負載圖和速度圖的繪制 15
3.3液壓缸主要參數的確定 15
3.3.1.初選液壓缸的工作壓力 15
3.3.2.計算液壓缸的尺寸 16
3.4.液壓缸的強度計算 19
3.5.液壓系統圖的擬訂： 26
3.5.1.液壓回路的選擇 26
3.5.2組成液壓系統 29
3.6.液壓元件的計算和選擇 32
3.6.1.液壓泵 32
3.6.2.閥類元件及其輔助元件 32
3.8.油箱的選擇 38
3.9液壓系統的性能驗算 39
致 謝 42
參 考 文 獻 43




參 考 文 獻
[1]張　捷.機械制造技術基礎.［M］.西南交大出版社，2006.2
[2]章宏甲.液壓傳動.［M］.機械工業出版社，2005.8
[3]施　平.機械工程專業英語.［M］.哈爾濱工業大學出版社，2005.8
[4]吳宗澤.機械設計課程設計手冊.（第二版）［M］.高等教育出版社.2004.4
[5]李益民.機械制造工藝設計簡明手冊.[M]，北京：機械工業出版社，1994.7
[6] 邱宣懷.機械設計.第四版[M]，北京：高等教育出版社，1997.4
[7] 大連組合機床研究所.組合機床設計.北京：機械工業出版社，1975.6
[8]周士昌.液壓系統設計圖集.北京：機械工業出版社，2004.3