基于FPGA的便捷式B超交互系統的設計

1.8萬字
我自己的畢業論文，原創的，已經通過校內系統檢測，僅在本站獨家出售，重復率低，大家放心下載使用


摘要
我國醫療器械產業是一個新型的健康產業，由于發展不久，不論是產能上還是研發上都遠遠不能滿足市場需求，我國現在醫療器械與藥品的消費比例差不多為1:10，但在發達國家這個比例已經達到了1:1，由此可見我國醫療器械產業還存在著很大的缺口，現在我國醫療器械產品六成以上都依賴于進口。在這種背景的推動下，中國便捷式B超儀產業保持著高速持續的發展，為中國醫療器械的發展做出了重要的貢獻。
本文在分析了國內外便捷式B超儀背景與市場現狀后，提出了一種基于NiOS II開發系統的便捷式B超儀設計方案。旨在滿足中國居民對便捷式B超儀的需求。
論文首先分析了便捷式B超儀的基本原理與結構，詳細介紹了NiOS II處理器，論證了在FPGA技術下開發的可能性，提出了以NiOS II+FPGA為平臺，QuartusII為軟件支撐的便捷式B超儀交互系統設計方案。并用SOPC技術來構建，以求使便捷式B超儀在性能，體積，價格，穩定性，適用范圍達到更高的要求。其次，對系統的軟硬件進行總的需求分析，并按照要求對軟硬件系統進行開發,得出仿真結果，并進行分析。本文所設計的便攜式B型超聲診斷儀可在多種特殊環境(諸如地震、抗洪、火災、戰爭）中發揮作用，同時也可在偏遠鄉村診所中完成對相關疾病的診斷工作。

關鍵詞：NiOS II處理器， FPGA， SOPC， 便捷式B超儀


ABSTRACT
China's medical equipment industry is a new kind of health industry, whether it is due to the development near the capacity of its research and development are still far from being able to meet the market demand, China's consumption ratio of medical equipment and drugs, now almost 1:10, but in developed countries this the ratio has reached 1:1, we can see that China's medical equipment industry, there is still a wide gap, and now more than 60 percent of China's medical device products are dependent on imports. Under the impetus of this background, China B-portable instrument industry maintained rapid and sustainable development, for the development of China's medical equipment made a significant contribution.
After analyzing the ultrasound instrument background and market situation at home and abroad portable B, B-made portable instrument design is based on a NiOS II development system. Designed to meet the needs of the residents of China B-portable instrument.
Thesis analyzes the basic principle and structure portable B-meter, detailing NiOS II processor, demonstrated the possibility of FPGA technology under development is proposed to NiOS II + FPGA platform, QuartusII portable software support B-device interactive system design. SOPC technology to build and use, in order to make portable B-device performance, volume, price stability, the scope for higher requirements. Secondly, the overall system's hardware and software requirements analysis, and in accordance with the requirements of the hardware and software system development, simulation results obtained and analyzed. This article is designed for portable B-type ultrasonic diagnostic apparatus may play a role in a variety of special circumstances (such as earthquakes, floods, fires, wars), and also to complete the diagnostic work-related diseases in remote rural clinics.



Keywords: NiOS II processor, FPGA, SOPC, B super-portable instrument.


目錄
第一章 緒論 1
1.1 引言 1
1.2現代超聲診斷技術國內外發展概況以及研究目的與意義 1
1.3研究的目的與意義 2
1.4便捷式B超的性能指標 3
1.4.1縱向分辯力 3
1.4.2橫向分辯力 4
1.4.3對比分辯力 4
1.4.4倍號動態范圍 4
1.5 FPGA在數字超聲系統中的應用 5
1.6本文工作和內容安排 6
1.7 本章小結 7
第二章 便攜式B型超聲儀成像系統原理以及系統的總體設計 8
2.1超聲成像原理 8
2.2 B型超聲儀的相關物理量 11
2.3系統的總體設計 12
2.3.1 一般B超檢查儀的設計及實現的功能 12
2.3.2 一般B型超聲診斷儀系統的軟硬件組成 14
2.4本章小結 15
第三章 便攜式B型超聲儀系統的硬件設計 16
3.1軟核CPU簡介 17
3.2發射部分硬件結構 19
3.3接收部分硬件結構 19
3.4圖像處理部分硬件結構 21
3.5人機接口部分硬件結構 21
3.6電源部分硬件結構 22
3.7本章小結 23
第四章 便攜式B型超聲儀系統的軟件平臺 24
4.1 Quartus II簡介 24
4.2 SOPC Builder 25
4.3 NIOS II IDE 26
4.4 系統重要功能模塊 27
4.4.1底層初始化 27
4.4.2功能層 28
4.4.3顯示層 29
4.5本章小結 30
第五章 交互系統的設計與實現 31
5.1軟件的設計實現與調試 31
5.2 系統的仿真與調試 35
5.2.1 NIOS II最小系統仿真 35
5.2.2 便捷式B超儀發射部分的仿真 35
5.2.3 便捷式B超儀接收射部分的仿真 36
5.2.4 便捷式B超儀圖像部分的仿真 37
5.2.5便捷式B超儀人機接口部分的仿真 38
5.2.6 便捷式B超儀電源部分的仿真 38
5.3調試中的認知與體會 39
第六章 總結和展望 40
6.1總結 40
6.2不足與展望 40