水稻聯合收獲田間試驗機籽粒與雜余攪龍?jiān)O(shè)計


摘要： 本課題研究水稻聯合收獲田間試驗機籽粒與雜余攪龍?jiān)O(shè)計，該水稻收割機可以一次性完成收割、脫粒、篩選和分離等作業，而攪龍的設計包括籽粒攪龍和雜余攪龍的設計。在聯合收割機中的脫出物、籽粒與雜余需要前后或上、下輸送，最為常用的輸送裝置是螺旋輸送器，它是一種結構簡單、工作可靠的輸送器，能進行水平、傾斜和垂直輸送，又叫“攪龍”，籽粒與雜余攪龍是聯合收獲機的關鍵工作部件之一。籽粒攪龍主要完成干凈籽粒的收集，并輸送至糧箱；雜余攪龍主要完成二次雜余的收集并輸送至脫粒分離裝置或清選裝置。需要在原來傳統收割機的基礎上進行改善，實物考查、測量，然后分工合作，最后設計的籽粒與雜余攪龍符合整個水稻聯合收割機的要求。

關鍵字：水稻聯合收割機 雜余攪龍 籽粒攪龍



Rice harvest field testing machine of grain and a tailing auger design
Abstract: The research of Paddy combine harvester is to design a grain auger and a tailing auger. The Paddy combine harvester can complete harvesting, threshing,screening and separation operation.Auger design includes grain a grain auger and a tailing auger. The combine of grain, grain and remainder need transportation around or Up and down. The most commonly used is the screw conveyor conveying device. It is a conveyor that has the advantages of simple structure, reliable work and can be horizontal, tilt and vertical transmission. Also,it is called "auger". The grain and the tailing auger is one of the key parts of combine harvester. The auger mainly complete the clean grain collection, and transported to the grain bin. The tailing auger mainly complete the collection of second miscellaneous and delivery to the threshing separation device or cleaning device. The need for improvement in the original traditional harvester. Physical examination, measurement, and the division of labor, the final design of the grain and the tailing auger meet the requirements of Paddy combine harvester.

Keyword: Paddy combine harvester a grain auger a tailing auger.


目 錄
第一章 緒 論
1.1 引 言---------------------------------------------------- 1
1.2 研究的內容及意義----------------------------------------- 2
1.2.1 設計內容-------------------------------------------- 2
1.2.2 設計意義-------------------------------------------- 2
1.3 本課題所涉及的軟件---------------------------------------- 2
1.3.1 Cad技術的應用-------------------------------------- 2
1.3.2 Solidedge技術的應用-------------------------------- 3
1.3.2 CATIA的應用---------------------------------------- 4
第二章 整體方案的設計
2.1 原理設計--------------------------------------------------4
2.1.1 設計思想--------------------------------------------4
2.1.2 工作流程--------------------------------------------5
2.2 方案設計--------------------------------------------------5
第三章 結構設計及分析
3.1 攪龍橫軸的設計---------------------------------------------6
3.1.1 攪龍橫軸螺旋葉片的設計-------------------------------7
3.1.2 攪龍橫軸的尺寸和強度校核-----------------------------7
3.1.3攪龍橫軸上的連接件：---------------------------------10
3.1.3.1攪龍橫軸與皮帶輪的連接----------------------- 10
3.1.3.2攪龍橫軸與鏈輪的連接------------------------- 10
3.2 攪龍外套設計----------------------------------------------10
3.3 攪龍斜軸的設計--------------------------------------------11
3.3.1攪龍斜軸螺旋葉片設計-------------------------------- 11
3.3.2攪龍斜軸的尺寸和強度校核---------------------------- 11
3.3.3攪龍斜軸上的連接件---------------------------------- 12
總結
4.1 課題設計小結---------------------------------------------12
4.2 自我小結-------------------------------------------------13
致謝--------------------------------------------------------------14
參考文獻---------------------------------------------------------15