CD132汽車后保險杠注塑模設計及工藝優化（本科畢業論文設計）

摘    要

注塑成型是現代塑料工藝中一種重要的加工方法。塑料保險杠具有強度、剛性和裝飾性，從安全上看，汽車發生碰撞事故時能起到緩沖作用，保護前后車體；從外觀上看，可以很自然的與車體結合在一塊，渾然成一體，具有很好的裝飾性，是裝飾轎車外型的重要部件。
本文主要就CD132汽車后保險杠注塑模的總設計方案進行了分析和確定。在進行注塑工藝方案選擇時，運用MOLDFLOW軟件對零件成型過程進行數值模擬仿真，并根據分析結果優化設計方案，已達到減少缺陷、提高成型質量的目的。在進行注塑模具設計時，對模具結構, 包括澆注系統、成型零件和導向裝置等的設計進行了介紹，并利用UG軟件對模具結構進行三維實體造型。

關鍵詞：汽車保險杠，MPI模擬分析，注塑模設計，CAD/CAE 

ABSTRACT

Injection molding is a kind of important plastic processing methods in modern plastic forming process. The plastic bumper is the safe installation of outside to absorb and mitigation power and the protection around department of auto body. And it also has a good decorate meaning, which to decorate the car's important part of the outside type.
The overall design and resin for the injection mold for the rear bumper of mendeo CD132 car were analyzed and determined in this paper. During the selection of injection process, a flow chart of optimization of gate design by using MoldFlow software is introduced resulted in reasonable gate number and location of the rear bumper by using it.  The designs of the injection mold, including the designs of molding part, guide and mold temperature control were also described in the paper. The injection mould of bumper is accurated by the UG software.

Key words： Bumper, MPI simulation analysis, Plastic Injection Mould, CAD/CAE

目   錄

中文摘要 Ⅰ
ABSTRACT Ⅱ
1緒論 1
  1.1國內外注塑模具的發展現狀 1
1.2 CAD/CAE技術在塑料注塑模具中的應用 2
1.2.1 CAD技術 2
1.2.2 CAE技術 2
1.3本課題的主要研究內容 3

 2 CD132汽車后保險杠工藝分析 5
2.1材料工藝性能分析 5
2.2塑件結構的工藝分析 5
2.3 CAE注塑模擬分析 7
2.3.1有限元模型的建立 7
2.3.2材料的選用 9
2.3.3澆口位置的選擇和確定 11
2.3.4流動分析過程及結果 13
2.3.5翹曲分析過程及結果 18
2.4 本章小結 19

 3 CD132汽車后保險杠注射模設計 20
3.1大型模具設計的特點 20
3.2澆注系統的設計 20
3.2.1熱流道系統簡介 21
3.2.2熱流道系統設計 21
3.2.3澆口設計 23
3.3注射模成型部件的設計 24
3.3.1型腔總體布置與分型面的選擇 24
3.3.2結構設計 25
3.3.3排氣結構設計 27
3.4導向與推出機構設計 27
3.4.1導向機構設計 27
3.4.2推出機構設計 28
3.5冷卻系統設計 30
3.5.1冷卻系統的設計原則 30
3.5.2冷卻水道的設計 30
3.6模具材料的選用 31
3.7 本章小結 31

4 結論 32

致謝 33

參考文獻 34