ZY1200全自動液壓墻體磚壓機設計

摘要
通過對墻體磚壓機的國內外研究現狀的分析，確定了本課題的主要設計內容。在確定了液壓機初步設計方案后，決定采用傳統理論方法對ZY1200全自動液壓墻體磚壓機機身結構進行設計、計算、強度校核，采用AUTO CAD 設計軟件對上橫梁、底座、上活動梁、下活動梁、主液壓缸、立柱、總裝圖進行了工程繪圖，在參考了某公司生產的四梁四柱液壓墻體磚液壓機液壓系統以及查閱了大量關于液壓系統設計的書籍后，確定全自動數字控制系統的設計方案，繪制了液壓系統圖，給出了電氣系統的工作說明書，并對其進行了可行性分析，最后對整個設計進行系統分析，得出整個設計切實可行。

關鍵詞 磚壓機 ；機身結構 ；液壓系統

Abstract
Through to the wall brick press's domestic and foreign research present situation's analysis, has determined this topic main design content. After having determined hydraulic press preliminary design plan, decided that uses the traditional theory method to carry on the design, the computation, the intensity examination to the ZY1200 completely automatic hydraulic pressure wall brick press fuselage structure, used AUTOCAD design software to the main traverse, the foundation, on the portable beam, under the portable beam, the host hydraulic cylinder, the column, the final assembly drawing to carry on the project cartography, in referred to some company to have produced four girders four column hydraulic pressure wall brick hydraulic press hydraulic system which as well as has consulted massively after the hydraulic system design books, determined that the semiautomatic numerical control system's design proposal, has drawn up the hydraulic scheme, has given electrical system's working instructions, and has carried on the feasibility analysis to it, finally to entire the design carries on the system analysis, obtains the entire design to be practical and feasible.

Key word  brick press; Fuselage structure; Hydraulic system

 
目       錄

1 緒論 1
1.1 液壓機工作原理 1
1.2 液壓機的分類 3
1.3 液壓機的基本參數 6
1.4 液壓機發展概況 8
1.5 液壓墻體磚壓機概述 10
1.5.1 液壓墻體磚壓機生產的背景 10
1.5.2 液壓墻體磚壓機的優勢 11
1.5.3 液壓墻材磚壓機的創新 11
2 ZY1200全自動液壓墻體磚壓機機身結構設計 13
2.1 用途和特點 13
2.2 主要技術參數 13
2.3 結構概述 13
2.4 上梁的設計計算及校核 14
2.5 底座的設計計算及校核 18
2.6 活動梁的設計計算及校核 22
2.7 液壓缸的設計、計算及校核 28
2.8 立柱部分強度計算、校核 32
2.9 機身的緊固 36
2.10 精度調整 38
3 ZY1200全自動液壓墻體磚壓機液壓系統的設計 40
3.1 電氣系統概述 40
3.2 電氣原理說明 40
4 安裝與試車 42
4.1 安裝 42
4.2調試 43
4.3 安全與維護 44
結論 46
參考文獻 47
致 謝 48
附錄 49