有關汽車天窗的機械設計，對于機械，機電一體化的畢業設計都適用，里面有機械圖，電路圖，很簡單，很容易懂！


總設計說明
汽車電動天窗主要由天窗玻璃、驅動電動機及齒輪、ECU及繼電器等組成，分析了天窗玻璃的打開、關閉等動作的工作原理，介紹了電子控制系統的控制過程。轎車電動天窗是轎車車身系統中最大的配套分總成,它具有采光性好、改善車內空氣質量、提高汽車檔次等優點,因此,天窗版的轎車越來越受到人們的青睞。但是,目前國內轎車天窗市場的80%以上份額仍被德國偉巴斯特車頂系統公司所壟斷。為了打破國外公司的技術封鎖和市場壟斷,提高國內汽車關鍵零部件產品的自主研發能力和國內轎車天窗企業的市場競爭能力,就必須采用現代設計方法進行轎車天窗自主開發研究。 本文采用逆向工程和正向設計相結合的方法建立轎車天窗產品的三維數字模型;運用多體系統動力學原理建立了天窗運動執行機構的運動學和動力學數學模型;應用ADAMS軟件對天窗運動執行機構進行運動仿真分析并進行參數優化設計;應用有限元分析軟件ANSYS Workbench對天窗運動執行機構進行動態有限元分析,通過分析,驗證設計的合理性。 通過本研究的實施,會從根本上改變目前國內轎車天窗行業的單純仿制的被動局面,盡快形成自主開發能力?？梢院喕a(chǎn)品的設計開發過程,縮短產品開發周期,減少產品開發費用和成本。本研究還會對其他科技含量較高的汽車零部件的自主研發具有示范意義。
汽車電動天窗對基本性能、電流特性、密封性、耐振性、耐久性、耐溫性、耐濕熱性、安全性、防盜性，都有很高的要求！天窗的金屬件必須經過防腐蝕處理，或使用具有防腐蝕性的材料制造。天窗的塑料件表面應光滑平整、無氣泡，無影響使用的變形。天窗金屬零件的涂鍍層和化學處理層應符合QC/T 625中相關條款的有關規定。天窗的玻璃表面應符合GB/T 17340中6有關前風窗以外玻璃規定，其余性能符合《GB 9656 汽車用安全玻璃》的規定。天窗密封條的表面質量和性能要求應符合GB/T 12421規定。
機械的傳動是從驅動電動機傳遞給v帶輪，v帶輪傳到到一級減速器，由一級減速器完全輸出工作，并最后由驅動齒輪傳遞給天窗滑桿，完成天窗玻璃的移動。
本文以PD78F0881微控制器為主控制芯片,設計了汽車電動天窗的控制單元,其特點是用按鍵控制天窗的動作,通過霍爾傳感器檢測天窗位置,實現了汽車天窗的開啟、關閉、防夾等控制功能。
關鍵詞：汽車電動天窗；天窗玻璃；基本結構；電子控制；霍爾傳感器

General design
Automotive electric skylight is mainly composed of the skylight glass, driving motor, gear, ECU and relay components, analysis of the skylight glass open, closing movements such as the working principle, introduced electronic control system. Power sunroof car body system is the largest supporting assembly, it has good lighting performance, improve the air quality inside the vehicle, improves the automobile level etc., therefore, the roof version of the car more and more people of all ages. However, the current domestic car sunroof market share is still more than 80% German Webasto roof systems company monopolies. In order to break the blockade of foreign companies in technology and market monopoly, improve the domestic car key parts and components products of independent research and development capabilities and domestic car sunroof market competitive ability of the enterprise, must adopt modern design method for automobile sunroof independent development research. In this paper, by using reverse engineering and forward design combining the method to establish the car skylight product3D digital model; multi-body system dynamics theory to establish a sunroof motor execution of kinematic and dynamic mathematical model; application software of ADAMS sunroof motion actuating mechanism motion simulation analysis and parameter optimization design; finite element analysis software ANSYS Workbench the sunroof motor actuator for dynamic finite element analysis, through the analysis, proved the reasonableness of the design. Through this research, implementation, will fundamentally change the current domestic car skylight industry pure imitation of the passive situation as soon as possible, form own development capacity. Can simplify the design of the products development process, shorten the product development cycle, reduce product development costs and cost. This study also to other high technology content of the auto parts self-R & D has demonstrative sense.
Automotive electric skylight on basic properties, current characteristics, sealing, vibration resistance, durability, temperature resistance, heat resistance, safety, security, have the very high request! The roof of metal parts must be anti-corrosion treatment, or the use of corrosion-resistant materials manufacturing. The roof of the plastic parts surface should be smooth, no bubbles, no effect by using deformation. Skylight metal coating and chemical processing layer should be consistent with the QC / T 625in the relevant provisions of the relevant provisions. Skylight glass surface should be in accordance with GB / T 17340in 6about the front windshield glass regulations outside, other properties are consistent with the" GB 9656" rules of automotive safety glass. Roof sealing strip surface quality and performance requirements shall be in accordance with GB / T 12421provisions.
Mechanical transmission is transmitted from the actuating motor to V belt, V belt wheel to a reducer, a reducer output work completely, and finally by the drive gear transmission to the sunroof sliding rod, complete the skylight glass mobile.
Based on the PD78F0881microcontroller as the main control chip, design of automotive electric skylight control unit, which is characterized with the key control roof movement, through the Holzer sensor detection window position, realize the sunroof opening, closing, clamping-proof control functions.
Key words: Electric Automotive skylight; skylight glass; basic structure; electronic control; Holzer senso

目錄
1 緒論 1
1.1  汽車電動天窗設計的目的與意義 1
1.2  汽車電動天窗的發展現狀及趨勢 2
1.2.1 汽車電動天窗的發展現狀 2
1.2.2 汽車電動天窗的趨勢 3
2 汽車電動天窗的設計要求 4
2.1 天窗的概念 4
2.2 天窗的工作原理 4
2.3 天窗的種類特點及設計選擇 4
2.3.1 汽車天窗種類 4
2.3.2 汽車天窗特點 4
2.3.3 汽車天窗各組成零部件執行標準 6
2.3.4 本設計的選擇 6
2.4 天窗的結構設計 7
2.4.1 天窗的結構 7
2.4.2 天窗的密封（排水）方式 8
2.4.3 天窗玻璃的處理 8
2.5 天窗的性能要求 8
2.5.1 天窗的安全性要求 8
2.5.2 天窗防夾功能 9
2.5.3天窗的性能要求 10
2.5.4 密封性 12
2.5.5 天窗系統對產生風噪的控制 12
2.6 汽車天窗優化設計 13
3 天窗機械傳動部分的設計 15
3.1 電動天窗機械部分原理及組成 15
3.1.1 汽車電動天窗的功能 15
3.1.2 電動天窗的組成 15
3.1.3 天窗的特點 15
3.1.4 電動天窗的工作原理及過程 16
3.2 機械減速部分結構設計 16
3.2.1傳動系統的工作特點 16
3.2.2  傳動裝置的總體設計 16
3.3 裝配圖設計 25
3.3.1 裝配圖的作用 25
3.3.2 減速器裝配圖的繪制 25
3.4 天窗運轉速度設計計算 26
3.4.1 天窗整體傳動路線： 26
3.4.2 天窗玻璃移動速度與全關閉及打開所需時間的計算 26
4 天窗電子控制部分設計 28
4.1 系統硬件設計 28
4.1.1 電機驅動模塊的電路設計 29
4.1.2 基于霍爾傳感器的天窗防夾模塊設計 29
4.1.3 EEPROM模塊設計 30
4.2 電子控制系統及其工作過程 31
4.2.1 滑動打開 32
4.2.2 滑動關閉 32
4.2.3 全關閉(位置)前200mm處停止 32
4.2.4 從停止到全關閉 33
4.2.5 全關閉位置時的停止 33
5 總結 34
參考文獻 35
致  謝 36
附錄A 天窗主要零件 37
附錄B 圖紙 48